成果及论文 - 生物材料与摩擦

当前位置：首页 > 成果及论文

成果及论文

一、代表性论文

2022

[1] Feng C A, Cen J J, Wu T, et al. Preparation and Properties of the Poly(ether ether ketone) (PEEK)/Nano-Zinc Oxide (ZnO)–Short Carbon Fiber (SCF) Artificial Joint Composites[J]. ACS APPLIED POLYMER MATERIALS. 2022.

[2] Chen K, Zhao Y J, ZhangY R, et al. Fretting stimulation enhances bone growth at the interface between hydroxyapatite coating and bone[J]. COLLOIDS AND SURFACES B-BIOINTERFACES. 2022, 217.

[3] Wu X F,ChenK, Chai Q,et al. Freestanding vascular scaffolds engineered by direct 3D printing with Gt-Alg-MMT bioinks[J]. BIOMATERIALS ADVANCES. 2022, 33.

[4] Chen Q, Zhang X, Chen K, et al. Bilayer Hydrogels with Low Friction and High Load-Bearing Capacity by Mimicking the Oriented Hierarchical Structure of Cartilage[J]. ACS APPLIED MATERIALS & INTERFACES. 2022.(JCR Q1;TOP期刊）

[5] Chen Q, Zhang X, Chen K, et al. Anisotropic hydrogels with enhanced mechanical and tribological performance by magnetically oriented nanohybrids[J]. CHEMICAL ENGINEERING JOURNAL. 2022, 430.(JCR Q1;TOP期刊）

[6] 冯存傲，张德坤，陈凯，等. 钛珠涂层和羟基磷灰石涂层与皮质骨界面的切向微动损伤研究[J]. 摩擦学学报. 2022: 1-18.

2021

[1] Wu X, Liu S, Chen K, et al. 3D printed chitosan-gelatine hydrogel coating on titanium alloy surface as biological fixation interface of artificial joint prosthesis[J]. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES. 2021, 182: 669-679.(JCR Q1;TOP期刊）

[2] Li X, Xu X, Qi J, et al. Insights into Superlow Friction and Instability of Hydrogenated Amorphous Carbon/Fluid Nanocomposite Interface[J]. ACS APPLIED MATERIALS & INTERFACES. 2021, 13(29): 35173-35186.(JCR Q1;TOP期刊）

[3] Yang H, Tang J, Luo Y, et al. MOFs-Derived Fusiform In2O3 Mesoporous Nanorods Anchored with Ultrafine CdZnS Nanoparticles for Boosting Visible-Light Photocatalytic Hydrogen Evolution[J]. SMALL. 2021, 17(36).(JCR Q1;TOP期刊）

[4] Yang C, Luo Y, Xia Y, et al. Synergistic Optimization of the Electronic and Phonon Transports of N-Type Argyrodite Ag8Sn1-xGaxSe6 (x = 0-0.6) through Entropy Engineering.[J]. ACS applied materials & interfaces. 2021, 13(47): 56329-56336.(JCR Q1;TOP期刊）

[5] He S, Luo Y, Xu L, et al. Remarkable Improvement of Thermoelectric Performance in Ga and Te Cointroduced Cu3SnS4[J]. INORGANIC CHEMISTRY. 2021, 60(15): 11120-11128.(JCR Q1;TOP期刊）

[6] Zhang X, Lou Z, Yang X, et al. Fabrication and Characterization of a Multilayer Hydrogel as a Candidate for Artificial Cartilage[J]. ACS APPLIED POLYMER MATERIALS. 2021, 3(10): 5039-5050.(JCR Q1;TOP期刊）

[7] Feng C, Zhang D, Chen K. Microscopic dynamic observation of adhesion hysteresis friction and exploration of the influence of different pressures on friction transmission[J]. FRICTION. 2021, 9(4): 758-773.(JCR Q1;TOP期刊）

[8] Qi J, Xu F, Bao K, et al. Influence of a hard transition layer on the microstructure and properties of diamond-like carbon/hydroxyapatite composite coating prepared by magnetron sputtering[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. 2021, 41(6): 3731-3742.(JCR Q1;TOP期刊）

[9] Zhang H, Liu H, Chen T, et al. Fabrication of a fast curing super-hydrophobic FEVE/MMA coating and its property research[J]. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS. 2021, 263.(JCR Q1;TOP期刊）

[10] Sun X, Luo Y, Wang J, et al. Structure, tribological properties, and the growth mechanism of in-situ generated TiC in titanium cermet[J]. FRICTION. 2021.(JCR Q1;TOP期刊）

2020

[1 Chen K, Wang F, Liu S, et al. In situ reduction of silver nanoparticles by sodium alginate to obtain silver-loaded composite wound dressing with enhanced mechanical and antimicrobial property[J]. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES. 2020, 148: 501-509.(JCR Q1;TOP期刊）

[2] Li X, Zhang D, Xu X, et al. Tailoring the Nanostructure of Graphene as an Oil-Based Additive: toward Synergistic Lubrication with an Amorphous Carbon Film[J]. ACS APPLIED MATERIALS & INTERFACES. 2020, 12(38): 43320-43330.(JCR Q1;TOP期刊）

[3] Li M, Xia Y, Luo Y, et al. Cation vacancy related crystal structure and bandgap and their effects on the thermoelectric performance of Cu-ternary systems Cu3+delta In5Te9 (delta=0-0.175)[J]. PHYSICAL CHEMISTRY CHEMICAL PHYSICS. 2020, 22(13): 7004-7011.(JCR Q1;TOP期刊）

[4] Feng C, Zhang D, Grecov D, et al. Effect of rheological properties of friction-enhancing greases on the friction between friction lining and wire rope[J]. TRIBOLOGY INTERNATIONAL. 2020, 144.(JCR Q1;TOP期刊）

[5] Chen M, Hu J, Wang L, et al. Targeted and redox-responsive drug delivery systems based on carbonic anhydrase IX-decorated mesoporous silica nanoparticles for cancer therapy[J]. SCIENTIFIC REPORTS. 2020, 10(1).(JCR Q1;TOP期刊）

2019

[1] Zhong Y, Luo Y, Li X, et al. Silver vacancy concentration engineering leading to the ultralow lattice thermal conductivity and improved thermoelectric performance of Ag1-xInTe2[J]. SCIENTIFIC REPORTS. 2019, 9.(JCR Q1;TOP期刊）

[2] Xu H, Zhang D, Chen K, et al. Taper fretting behavior of PEEK artificial hip joint[J]. TRIBOLOGY INTERNATIONAL. 2019, 137: 30-38.(JCR Q1;TOP期刊）

[3] Kong W, Zhang D, Tao Q, et al. Wear properties of the deep gradient wear-resistant layer applied to 20CrMnTi gear steel[J]. WEAR. 2019, 424: 216-222.(JCR Q1;TOP期刊）

[4] Qi J, Yang Y, Zhou M, et al. Effect of transition layer on the performance of hydroxyapatite/titanium nitride coating developed on Ti-6Al-4V alloy by magnetron sputtering[J]. CERAMICS INTERNATIONAL. 2019, 45(4): 4863-4869.(JCR Q1;TOP期刊）

[5] Chen C, Wang B, Liu H, et al. Synthesis of 3D dahlia-like Co3O4 and its application in superhydrophobic and oil-water separation[J]. APPLIED SURFACE SCIENCE. 2019, 471: 289-299.(JCR Q1;TOP期刊）

二、代表性专利

[1]滕淑华，周华建，周艺博。载药聚己内酯-壳聚糖-二氧化硅杂化纤维的制备方法，发明专利，中国，专利号：ZL202010704060.7，授权日期：2021.10.15。

[2]陈凯，王丰艳，吴晓芳，刘思雨，许林敏，张德坤。一种基于绿色原位还原的3D打印抗菌水凝胶伤口敷料，发明专利，中国，专利号：ZL201911104667.5，授权日期：2021.08.17。

[3]张德坤，张欣悦，郭永波，吴明锦，张俊，王大刚。一种落锤式钢丝绳冲击破坏试验装置及方法，发明专利，中国，专利号： ZL 201910824307.6，授权日期：2021.02.26。

[2]张德坤，张春雷，郭永波，吴明锦，张欣悦，王大刚。一种横置钢丝绳径向冲击下张力振动检测分析方法及装置，发明专利，中国，专利号： ZL201910652584.3，授权日期：2021.02.26。

[4]张德坤，徐寒冬，陈凯，张羽，牛家墨，张月茹。人工关节生物固定界面微动刺激骨生长的实验装置及方法，发明专利，中国，专利号： ZL201811541781.X，授权日期：2020.06.23。

[5]张德坤，郭永波，张春雷，吴明锦，张欣悦，张俊，王大刚。一种横置钢丝绳弯曲弹射冲击振动检测分析方法及装置，发明专利，中国，专利号： ZL201910652605.1，授权日期：2020.05.08。

[6]陈凯，张德坤，杨雪晖，许林敏，凌意瀚，王庆良，葛世荣。多层异构仿生关节软骨材料的制备工艺，发明专利，中国，专利号：ZL201710302611.5，授权日期：2019.06.18。

[7]陈凯，张德坤，杨雪晖，魏生，许林敏，葛世荣。抗菌型人工关节固定界面的制备方法，发明专利，中国，专利号：ZL201710303525.6，授权日期：2019.06.11。

[8]陈凯，张德坤，杨雪晖，许林敏，王庆良，葛世荣。软‑软接触式仿生关节制备工艺，发明专利，中国，专利号： ZL201710302585.6，授权日期：2019.05.07。

[9]亓健伟，陈章波，贺丹枫，杨意鸣，王庆良。一种可屏蔽有害离子释放的多孔羟基磷灰石/氮化钛生物活性涂层及用途，发明专利，中国，专利号：ZL201710328710.0，授权日期：2019.02.22。

[10] 张德坤，徐寒冬，陈凯，张欣悦，葛世荣。一种模拟人工关节多运动轨迹摩擦的试验方法及装置，发明专利，中国，专利号：ZL201710006327.3，授权日期：2019.02.19。

三、代表性科研教学奖励

[1]王庆良，形变诱导硬化型中锰耐磨钢关键技术及应用，天津市技术发明奖二等奖，2021

[2]摩擦学与可靠性工程研究所,煤矿井下运输系统安全保障关键技术与装备，国家技术发明奖二等奖，2011

[3]摩擦学与可靠性工程研究所,特厚煤层安全开采关键装备及自动化技术，国家科学技术进步二等奖，2010

[4]矿井大型带式输送机安全保障关键技术，教育部科技进步奖二等奖，2009

[5]摩擦学与可靠性工程研究所，摩擦学的分形理论，江苏省科技进步奖，2005

[6]摩擦学与可靠性工程研究所，教育部科技进步奖三等奖，2006