1.      Xiaobo Wang, Lei Zhang, Bo Song*, et al., Anisotropic mechanical and mass-transport performance of plate lattice scaffolds prepared by laser powder bed fusion [J]. Acta Biomaterialia, 2022, 148: 374-388.（中科院一区，IF=10.633）
2.      Xiaobo Wang, Lei Zhang, Bo Song*, et al., Tunable mechanical performance of additively manufactured plate lattice metamaterials with half-open-cell topology [J]. Composite Structures, 2022, 300, 116172.（中科院一区，IF=6.603）
3.      Xiaobo Wang, Bo Song*, Hanxing Zhu, et al., Additively manufactured plate lattice interpenetrating composites with high yield strength and energy absorbing capability [J]. Composite Structures, 2025, 353, 118709.（中科院一区，IF=6.603）
4.      Xiaobo Wang, Hanxing Zhu*, Yongtao Lu, et al., The elastic properties and deformation mechanisms of actin filament networks crosslinked by filamins [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 112, 104075.（中科院二区，IF=4.042）
5.      Xiaobo Wang, Hanxing Zhu*, Bo Song, et al., Nonlinear elastic behaviors and deformation mechanisms of nano-structured crosslinked biopolymer networks [J]. Extreme Mechanics Letters, 2023, 61, 102017.（中科院二区，IF=4.728）
6.      Lei Zhang, Hanwen Liu, Bo Song*, Jialun Gu, Lanxi Li, Wenhui Shi, Gan Li, Shiyu Zhong, Hui Liu, Xiaobo Wang, Junxiang Fan, Zhi Zhang, Pengfei Wang, Yonggang Yao*, Yusheng Shi and Jian Lu*, Wood-inspired metamaterial catalyst for robust and high-throughput water purification. Nature Communications, 2024, 15(1), 2046.（中科院一区，IF=14.7）
7.      Shuaishuai Wei, Bo Song*, Lei Zhang, Xiaobo Wang, Junxiang Fan, Zhi Zhang and Yusheng Shi, Effect of Structural Configurations on Mechanical and Shape Recovery Properties of NiTi Triply Periodic Minimal Surface Porous Structures. Chinese Journal of Mechanical Engineering, 2024, 37(1), 125.（中科院二区，IF=4.6）
8.      Jinliang Zhang, Xiaobo Wang, Jianbao Gao, Lei Zhang, Bo Song*, Lijun Zhang, Yonggang Yao, Jian Lu and Yusheng Shi, Additive manufacturing of Ti–6Al–4V/Al–Cu–Mg multi-material structures with a Cu interlayer. International Journal of Mechanical Sciences, 2023, 256, 108477.（中科院一区，IF=6.772）
9.      Shuaishuai Wei, Jinliang Zhang, Lei Zhang, Yuanjie Zhang, Bo Song*, Xiaobo Wang, Junxiang Fan, Qi Liu and Yusheng Shi, Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: A review. International Journal of Extreme Manufacturing, 2023, 5, 032001.（中科院一区，IF=10.036）
10.  Junxiang Fan, Bo Song*, Lei Zhang, Xiaobo Wang, et al., Structural design and additive manufacturing of multifunctional metamaterials with low-frequency sound absorption and load-bearing performances. International Journal of Mechanical Sciences, 2023, 238: 107848.（中科院一区，IF=6.772）
11.  Zhenhua Zhang, Quanquan Han*, Zhongyi Liu, Xiaobo Wang, Liqiao Wang, Xusheng Yang, Teng Ma, Zhengjiang Gao, Influence of the TiB2 content on the processability, microstructure and high-temperature tensile performance of a Ni-based superalloy by laser powder bed fusion [J]. Journal of Alloys and Compounds, 2022, 908: 164656.（中科院一区，IF=6.371）
12.  Zhi Zhang, Bo Song*, Yonggang Yao, Lei Zhang, Xiaobo Wang, Junxiang Fan, Yusheng Shi, Bioinspired, Simulation-Guided Design of Polyhedron Metamaterial for Simultaneously Efficient Heat Dissipation and Energy Absorption [J]. Advanced Materials Technologies, 2022, 7(10): 2200076.（中科院二区，IF=8.856）
13.  Quanquan Han*, Kenny W.Q. Low, Yuchen Gu, Xiaobo Wang, Liqiao Wang*, Bo Song, Chuanzhen Huang, Rossitza Setchi, The dynamics of reinforced particle migration in laser powder bed fusion of Ni-based composite [J]. Powder Technology, 2021, 394: 714-723.（中科院二区，IF=5.640）
14.  Jinliang Zhang, Weihao Yuan, Bo Song*, Shuo Yin, Xiaobo Wang, Qingsong Wei, Yusheng Shi, Towards understanding metallurgical defect formation of selective laser melted wrought aluminum alloys [J]. Advanced Powder Materials, 2022, 100035.（JCR Q1，IF=28.6）
15.  Junxiang Fan, Lei Zhang, Xiaobo Wang, Zhi Zhang, Shuaishuai Wei, Bo Song, Aiguo Zhao, Xiao Xiang, Xuefeng Zhu, Yusheng Shi, 3D printed ultra-thin acoustic metamaterials with adaptable low-frequency absorption performance. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers. 2022, 1(3), 100036.（中国科技期刊卓越行动计划“高起点新刊”）
16.  Zhi Zhang, Bo Song, Junxiang Fan, Xiaobo Wang, et al., Design and 3D Printing of Graded Bionic Metamaterial Inspired by Pomelo Peel for High Energy Absorption. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers. 2023, 2(1), 100068.（中国科技期刊卓越行动计划“高起点新刊”）
17.  张志，宋波*，王晓波，张磊，范军翔，魏帅帅，史玉升．吸能的力学超材料设计与增材制造研究现状及趋势 [J]. 中国激光，2022, 49: 196-209.（EI，CJCR=2.487，中国科技期刊卓越行动计划“梯队期刊”）
18.  宋波*，张磊，王晓波，范军翔，魏帅帅，张志，李敬洋，祁俊峰，史玉升．面向航空航天的增材制造超材料的研究现状及发展趋势[J]．航空制造技术，2022, 65(14): 22–33.