2022年:
1. Zhao Mo, Guanyu Wu, Pengcheng Yan, Xingwang Zhu, Junchao Qian, Yucheng Lei, Li Xu, Hui Xu, Henan Li, Engineering oxygen into ultrathin graphitic carbon nitride: synergistic improvement of electron reduction and charge carrier dynamics for efficient photocatalysis, Materials Today Chemistry, 2022, 25, 100956.
2. Zhao Mo, Keqiang Xu, Limin Yu, Tianyu Huang, Yanhua Song, Junjie Yuan, Cheng Ding, Yucheng Lei, Huaming Li, Hui Xu, Activation of Fe Species on graphitic carbon nitride nanotubes for efficient photocatalytic ammonia synthesis, International Journal of Energy Research, 2022, 10.1002/er.8056.
2021年:
1. Zhixiang Liu, Weimin Guo, Xinmei Liu, Guanyu Wu, Yunqing Tang, Zhao Mo*, Daoguo Yang*, Study on photoelectric properties of Fe-Co codoped g-C3N4, Chemical Physics Letters, 2021, 781, 138951.
2. Zhixiang Liu, Gongqin Yan, Xinmei Liu, Yunqing Tang, Zhao Mo*, Daoguo Yang*, Study on photoelectric properties of Al-Eu codoped ZnO, Journal of Alloys and Compounds, 2021, 882, 160606.
3. Hongliang Li, Zeyu Wang*, Hassaan Ahmad Butt, Maocheng Ye, Hao Chen, Tianmo Zhao, Manni Li, Qiang Ma, Yucheng Lei, Study on the Residual Stress Relieving Mechanism of C/C Composite-Nb Brazed Joint by Employing a Structurally Optimized Graphene Reinforced Cu Foam Interlayer, Frontiers in Materials, 2021, 10.3389/fmats.2021.761088.
2020年:
1. Zhao Mo, Jun Di, Pengcheng Yan, Chade Lv, Xingwang Zhu, Daobin Liu, Yanhua Song, Chuntai Liu, Qing Yu, Huaming Li, Yucheng Lei, Hui Xu, Qingyu Yan, An all-organic D-A system for visible-light-driven overall water splitting, Small, 2020, 16, 2003914.
2. Zhao Mo, Xiaojie She, Zhegang Chen, Fan Xu, Yanhua Song, Xingwang Zhu, Junchao Qian, Huaming Li, Yucheng Lei, Hui Xu, Short-time thermal oxidation of ultrathin and broadband carbon nitride for efficient photocatalytic H2 generation, ChemCatChem, 2020, 12, 1169-1176.
3. Chengchao Du, Qiuhong Pan, Shujin Chen, et al., Effect of rolling on the microstructure and mechanical properties of 6061-T6 DS-FSW plate, Materials Science & Engineering A, 2020, 772, 138692.
4. Y.J. Feng, J.B. Hou, L. Gao, G.R. Cui, W.C. Zhang, Research on the inhomogeneity and joint interface of in situ oriented TiBw/TA15 composites fabricated by vacuum hot-pressing sintering and canned extrusion, Journal of Manufacturing Processes, 2020, 59, 791-800.
5. Wenjun Liu, Jian Bao, Li Xu, Meili Guan, Yucheng Lei, Chromium-modulated multifunctional electrocatalytic activities of spinel oxide for Zn-air batteries and overall water splitting, Journal of Power Sources, 2020, 479, 229099.
6. Wenjun Liu, Dewei Rao, Jian Bao, Li Xu, Yucheng Lei, Huaming Li, Strong coupled spinel oxide with N-rGO for high-efficiency ORR/OER bifunctional electrocatalyst of Zn-air batteries, Journal of Energy Chemistry, 2020, in press.
7. Yiming Hu, Wenjun Liu, Kun Jiang, Li Xu, Meili Guan, Jian Bao, Hongbing Ji, Huaming Li, Constructing a CeO2-x@CoFe-layered double hydroxide heterostructure as an improved electrocatalyst for highly efficient water oxidation, Inorganic Chemistry Frontiers, 2020, 7, 4461-4468.
8. Li Tian Qing, Yang Xi Mou, Chen Lu, Zhang Yu, Lei Yu Cheng, Yan Jiu Chun, Arc behaviour and weld formation in gas focusing plasma arc welding, Science and Technology of Welding and Joining, 2020, 25(4), 329-335.
9. Li Tian Qing, Chen Lu, Zhang Yu, Yang Xi Mou, Lei Yu Cheng, Metal flow of weld pool and keyhole evolution in gas focusing plasma arc welding, International Journal of Heat and Mass Transfer, 2020, 150, 119296.
10. Gang Chen, Na Ju, Yucheng Lei, Dan Wang, Qiang Zhu, Tianqing Li, Corrosion behavior of base metal and weld bead of CLAM steel in flowing Pb-Bi at 550 °C, Progress in Nuclear Energy, 2020, 118, 103074.
11. Xinyan Li, Dan Wang, Juming Gao, Weiwei Zhang, Canyang Li, Nianzheng Wang, Yucheng Lei. Influence of ns-laser cleaning parameters on the removal of the painted layer and selected properties of the baser metal. Materials, 2020, 13(5363), 1-17.
12. 李鑫炎, 李灿阳, 王丹, 雷玉成, 李猛刚, 黄巍, 激光扫描速度对Q345钢表面锈层清洗质量的影响. 中国激光, 2020, 47(10), 1002010-1-9.
13. Wenbin Wang, Li Xiong, Dan Wang, Qin Ma, Yan Hu, Guanzhi Hu, Yucheng Lei. A new test method for evaluation of solidification cracking susceptibility of stainless steel during laser welding. Materials, 2020, 12(3178), 1-13.
14. 王丹, 门井浩太, 山本元道, 篠崎贤二. 奥氏体系合金激光焊接凝固裂纹敏感性研究. 稀有金属材料与工程. (已接收)
2019年:
1. Zhao Mo, Hui Xu, Zhigang Chen, Xiaojie She, Yanhua Song, Jiabiao Lian, Xingwang Zhu, Pengcheng Yan, Yucheng Lei, Shouqi Yuan, Huaming Li, Construction of MnO2/Monolayer g-C3N4 with Mn vacancies for Z-scheme overall water splitting, Applied Catalysis B: Environmental, 2019, 241, 452-460.
2. Zhao Mo, Xingwang Zhu, Zhifeng Jiang, Yanhua Song, Daobin Liu, Hongping Li, Xiaofei Yang, Yuanbin She, Yucheng Lei, Shouqi Yuan, Huaming Li, Li Song, Qingyu Yan, Hui Xu, Porous nitrogen-rich g-C3N4 nanotubes for efficient photocatalytic CO2 reduction, Applied Catalysis B: Environmental, 2019, 256, 117854.
3. Zhao Mo, Hui Xu, Xiaojie She, Yanhua Song, Pengcheng Yan, Jianjian Yi, Xingwang Zhu, Yucheng Lei, Shouqi Yuan, Huaming Li, Constructing Pd/2D-C3N4 composites for efficient photocatalytic H2 evolution through nonplasmon-induced bound electrons, Applied Surface Science, 2019, 467-468, 151-157.
4. Chengchao Du, Xue Wang, Chang Luo, Effect of post-weld heat treatment on the microstructure and mechanical properties of the 2205DSS/Q235 laser beam welding joint, Journal of Materials Processing Technology, 2019, 263, 138-150.
5. Chengchao Du, Xue Wang, Qiuhong Pan, Kailin Xue, Microstructure and mechanical properties of 6061-T6 double-side FSW joint, Journal of Manufacturing Processes, 2019, 38, 122-134.
6. Zhao X, Ning Z , Song H , et al., Oxidation and Ignition Behaviors of Molten Mg-Nd-Zr Alloy in Resin-Sand Mold, Journal of Materials Engineering and Performance, 2019, 28(9), 5344-5351.
7. Wenjun Liu, Jian Bao, Li Xu, Meili Guan, Zhaolong Wang, Jingxia Qiu, Yunpeng Huang, Jiexiang Xia, Yucheng Lei, Huaming Li, NiCo2O4 ultrathin nanosheets with oxygen vacancies as bifunctional electrocatalysts for Zn-air battery, Applied Surface Science, 2019, 478, 552-559.
8. Gang Chen, Yucheng Lei, Qiang Zhu, Tianqing Li, Dan Wang, Na Ju, Longren Xiao, Meng Luo, Study on Corrosion Behavior of Weld Bead by Tungsten Inert Gas Welding China Low Activation Martensitic Steel in Static Oxygen-Saturated Pb-Bi at 500°C, SCIENCE SECTION, 2019, 75(4), 408-416.
9. Fugui Li, Yucheng Lei, Xuening Zhang, Tianqing Li, Dan Liu, Study on microstructure change and hardening of 316L steel weld seam after helium ion irradiation, Fusion Engineering and Design, 2019, 148, 111293.
10. Gang Chen, Na Ju, Yucheng Lei, Dan Wang, Qiang Zhu, Tianqing Li, Corrosion behavior of 410 stainless steel in flowing lead-bismutheutectic alloy at 550℃, Journal of Nuclear Materials, 2019, 522, 168-183.
11. Gang Chen, Yucheng Lei, Qiang Zhu, Na Ju, Tianqing Li, Dan Wang, Corrosion behavior of CLAM steel weld bead in flowing Pb-Bi at 550℃, Journal of Nuclear Materials, 2019, 515, 187-198.
12. 朱强, 赵军, 雷玉成, 陈文彬, 微弧氧化处理对碳钢表面耐LBE腐蚀性能的影响, 表面技术, 2019, 48(1), 234-240.
13. 朱强, 陈文彬, 雷玉成, 赵军, 电流密度对碳钢微弧氧化层耐液态铅铋腐蚀性能的影响, 表面技术, 2019, 48(2), 1-7.
14. Zhu Qiang, He Ning, Zhang Yanchao, Lei Yucheng, Effect of current density on micro-arc oxidation of Q235 steel and corrosion resistance in liquid Pb-Bi, Materials and Corrosion-Werkstoffe und Korrosion, 2019, 70(7), 1171-1178.
2018年:
1. Zhao Mo, Hui Xu, Zhigang Chen, Xiaojie She, Yanhua Song, Jingjie Wu, Pengcheng Yan, Li Xu, Yucheng Lei, Shouqi Yuan, Huaming Li, Self-assembled synthesis of defect-engineered graphitic carbon nitride nanotubes for efficient conversion of solar energy, Applied Catalysis B: Environmental, 2018, 225, 154-161.
2. Zhao Mo, Hui Xu, Zhigang Chen, Xiaojie She, Yanhua Song, Pengcheng Yan, Yuanguo Xu, Yucheng Lei, Shouqi Yuan, Huaming Li, Gold/monolayer graphitic carbon nitride plasmonic photocatalyst for ultrafast electron transfer in solar-to-hydrogen energy conversion, Chinese Journal of Catalysis, 2018, 39, 760-770.
3. Chengchao Du, Xue Wang, Lei Hu, Microstructure, mechanical properties and residual stress of a 2205DSS/Q235 rapidly formed LBW joint, Journal of Materials Processing Technology, 2018, 256, 78-86.
4. Chengchao Du, Xue Wang, Shuang Tian, Effect of bonding time on the microstructure and mechanical properties of Co/Sn/Cu joint, Journal of Materials Science: Materials in Electronics, 2018, 29, 455-466.
5. Zhao, X.Y., Ning, Z., Li, Z., Zou, W., Li, B., He, K., Luo, A. A., In-mold oxidation behavior of Mg-4.32 Y-2.83 Nd-0.41 Zr alloy, Journal of Materials Science, 2018, 53(15), 11091-11103.
6. Li Hongliang, Liu Duo, Feng Jicai, et al., Microstructure and mechanical properties of dissimilar welds between 16Mn and 304L in underwater wet welding, Sci. Technol. Weld. Joi., 2018, 4, 1-7.
7. Li Hongliang, Liu Duo, Feng Jicai, et al., Effects of heat input on arc stability and weld quality in underwater wet flux-cored arc welding of E40 steel, J. Manuf. Process., 2018, 31, 833-843.
8. Liu Duo, Li Hongliang, Yan Yaotian, et al., Effects of processing parameters on arc stability and cutting quality in underwater wet flux-cored arc cutting at shallow water, J. Manuf. Process., 2018, 33, 34-44.
2017年以前:
1. Zhao X.Y., Ning Z., Li Z., Zou W., Li B., Huang Y., et al., Evolved gas analysis of PEP-SET sand by TG and FTIR, Journal of Analytical and Applied Pyrolysis, 2017, 127, 490-495.
2. Chengchao Du, Xue Wang, Zhongmin Lai, Generation of near eutectic phase layer in Sn-15Bi solder joint during electro-migration, Materials Letters, 2017, 191, 193-195.
3. Zhao X.Y., Ning Z.L., Cao F.Y., Liu S.G., Huang Y.J., Liu J.S., Sun J.F, Effect of Double Oxide Film Defects on Mechanical Properties of As-Cast C95800 Alloy, Acta Metallurgica Sinica (English Letters), 2017, 30(6), 541-549.
4. Y.J. Feng, W.C. Zhang, G.R. Cui, J.P. Wu, W.Z. Chen, Effects of the extrusion temperature on the microstructure and mechanical properties of TiBw/Ti6Al4V composites fabricated by pre-sintering and canned extrusion, J. Alloys Compd., 2017, 721, 383-391.
5. Y.J. Feng, W.C. Zhang, L. Zeng, G.R. Cui, W.Z. Chen, Room-Temperature and High-Temperature Tensile Mechanical Properties of TA15 Titanium Alloy and TiB Whisker-Reinforced TA15 Matrix Composites Fabricated by Vacuum Hot-Pressing Sintering, MATERIALS, 2017, 10, 421.
6. W.C. Zhang, Y.J. Feng, W.Z. Chen, Jianlei Yang, Effects of heat treatment on the microstructure and mechanical properties of in situ inhomogeneous TiBw/Ti6Al4V composite fabricated by pre-sintering and canned powder extrusion, J. Alloys Compd., 2017, 693, 1116-1123.
7. Y.J. Feng, W.C. Zhang, G.R. Cui, W.Z. Chen, Y. Yu, Room temperature tensile fracture characteristics of the oriented TiB whisker reinforced TA15 matrix composites fabricated by pre-sintering and canned extrusion, Mater. Sci. Eng. A, 2017, 707, 40-43.
8. Ning Z.L., Zhao X.Y., Luo A.A., Liu H.H., Liang W.Z., Huang Y.J., et al., The melt protection mechanism of an SO2/CO2 gas mixture for a magnesium-rare-earth based alloy, Journal of Alloys and Compounds, 2017, 722, 101-107.
9. Yucheng Lei, Xiaokai Guo, Hongxia Chang, Tianqing Li, Qiang Zhu, Gang Chen, Longren Xiao, Cavitation erosion behavior of CLAM steel weld joint in liquid lead-bismuth eutectic alloy, Journal of Iron and Steel Research, 2017, 21, 935-942.
10. Yucheng Lei, Hongxia Chang, Xiaokai Guo, Tianqing Li, Longren Xiao, Ultrasonic cavitation erosion of 316L steel weld joint in liquid Pb-Bi eutectic alloy at 550 °C, Ultrasonics-Sonochemistry, 2017, 39, 77-86.
11. Dan Wang, Kota Kadoi and Kenji Shinozaki. Prediction of residual liquid distribution of austenitic stainless steel during laser beam welding using multi-phase field modeling. ISIJ International, 2017, 57(1), 139-147.
12. Li Hongliang, Liu Duo, Guo Ning, et al., The effect of alumino-thermic addition on underwater wet welding process stability, J. Mater. Process. Technol., 2017, 245, 149-156.
13. Li Hongliang,Liu Duo,Song Yanyu,et al., Microstructure and mechanical properties of underwater wet welded high carbon equivalent steel Q460 using austenitic consumables, J. Mater. Process. Technol., 2017, 249, 149-157.
14. 李洪亮, 刘多, 冯吉才, 唐冬雁, 304不锈钢水下湿法焊接工艺研究, 焊接学报, 2017, 9, 5-8.
15. Song Yanyu, Li Hongliang, Liu Duo, et al., Interfacial microstructure and mechanical property of brazed copper/SiO2 ceramic joint. Vacuum, 2017, 141, 116-123.
16. Dong-dong Zhuang, et, Microstructure and texture evolution during recrystallization of low-carbon steel sheets, Journal of Iron and Steel Research International, 2017, 24(1), 84-90.
17. Li Hongliang, Liu D, Tang D, et al., Microstructure and mechanical properties of E36 steel joint welded by underwater wet welding, China Welding, 2016, 25(1), 30-35.
18. Li Hongliang, Liu Duo, Yan Yaotian, et al., Microstructural characteristics and mechanical properties of underwater wet flux-cored wire welded 316L stainless steel joints, J. Mater. Process. Technol., 2016, 238, 423-430.
19. Li Tian Qing, Wu Chuan Song, Chen Ji, Transient variation of arc heat flux and pressure distribution on keyhole wall in PAW, Welding in the World, 2016, 60(2), 363-20. Yunlong Wang, Linzhong Zhu, Miao Wang, Mingqi Zhang, Yang Yang, Qiang Zhu, Yucheng Lei, Microstructure and photocatalytic activity of porous TiO2-Fe2O3 composite film by PEO coupled with post heat treatment, international journal of hydrogen energy 2016, 41, 15703-15709.
21. Dan Wang, Kota Kadoi, Kenji Shinozaki and Motomichi Yamamoto. Evaluation of solidification cracking susceptibility for austenitic stainless steel during laser Trans-Varestraint test using two-dimensional temperature measurement. ISIJ International, 2016, 56(11), 2022-2028.
22. Kota Kadoi, Dan Wang and Kenji Shinozaki. Solidification cracking susceptibility during laser welding and the high-accuracy evaluation. Journal of the Japan Welding Society, 2016, 85(6), 13-18.
23. Dan Wang, Shuntaro Sakoda, Kota Kadoi, Kenji Shinozaki and Motomichi Yamamoto. Investigation of evaluation method for hot cracking susceptibility of 310S stainless steel during laser welding using Trans-Varestraint test. Quarterly Journal of the Japan Welding Society, 2015, 33(2), 39-43.
24. Li Tian Qing, Wu Chuan Song, Numerical simulation of plasma arc welding with keyhole-dependent heat source and arc pressure distribution, International Journal of Advanced Manufacturing Technology, 2015, 78(1-4), 593-602.
25. Zhao Mo, Xiaojie She, Yeping Li, Liang Liu, Liying Huang, Zhigang Chen, Qi Zhang, Hui Xu, Huaming Li, Synthesis of g-C3N4 at different temperatures for superior visible/UV photocatalytic performance and photoelectrochemical sensing of MB solution, RSC Advances, 2015, 5, 101552-101562.
26. Yucheng Lei, Xu Wang, Qiang Zhu, Faqiang Liu, Effect of Vanadium on Microstructure and Mechanical Properties of TIG Weld Joint of China Low Activation Martensitic Steel, J. Fusion. Energ., 2015, 34, 1112-1117.
27. Yucheng Lei, Chengwen Xiao, Xu Wang, Jiajia Yue, Qiang Zhu, Tensile properties and fracturing behavior of weld joints in the CLAM at high temperatures, Fusion Engineering and Design, 2015, 95, 27-33.
28. 庄栋栋等, 酸溶铝含量对低碳铝镇静钢组织性能及织构的影响, 材料热处理学报, 2015, 36(12), 140-144.
29. 庄栋栋等, 单机架可逆冷轧过程中不同厚度规格低碳铝镇静钢组织性能研究, 材料热处理学报, 2015, 36(S2), 45-50.
30. Qiang Zhu, Yucheng Lei, Yunlong Wang, Shenyong Liang, Shenyong Liang, Yimin Ye, Changsheng Li, Microstructure and Stress Distribution Analysis of T-Joint of CLAM Steel, Journal of Fusion Energy, 2015, 34(3), 540-544.
31. Qiang Zhu, Yucheng Lei, Yunlong Wang, Shenyong Liang, Yimin Ye, Changsheng Li, Microstructure and Stress Distribution on TIG Welded Joint of CLAM Steel, Journal of Fusion Energy, 2015, 34(5), 995-1001.
32. Qiang Zhu, Yu-cheng Lei, Yunlong Wang, Wei Huang, Bo Xiao, Yi-min Ye, Effects of arc-ultrasonic on pores distribution and tensile property in TIG welding joints of MGH956 alloy, Fusion Engineering and Design, 2014, 89(12), 2964-2970.
33. Jun Shen, Libiao Wen, Xiong Luo, Nan Xu, Dan Wang and M Liu. Development of novel heating tool friction stir spot welding (HT-FSSW) for AZ31 magnesium alloy. Science and Technology of Welding and Joining, 2014, 19(5), 369-375.
34. Jun Shen, Kai Liu, Dajun Zhai, Dan Wang, Nan Xu and C Jiang. Effects of SiC ceramic particles on microstructures and mechanical properties of gas tungsten arc welded AZ31 magnesium alloy with Cr2O3 flux coating. Science and Technology of Welding and Joining, 2013, 18(1), 11-18.
35. 庄栋栋等, 不同压下率低碳铝镇静钢板再结晶实验研究, 材料工程, 2013, (9), 38-43.
36. 庄栋栋等, 退火温度对低碳铝镇静钢板组织及力学性能的影响, 材料热处理学报, 2013, 34(6), 94-98.
37. 庄栋栋等, 二相粒子对低碳铝镇静钢织构演变规律的影响, 材料工程, 2012, (12), 45-49.
38. 庄栋栋等, 冷轧压下率对低碳铝镇静钢板组织及力学性能的影响, 材料热处理学报, 2012, 33(12), 110-115.
39. Li Tian Qing, Wu Chuan Song, Feng Yan Hui, Zheng Lian Cun, Modeling of the thermal fluid flow and keyhole shape in stationary plasma arc welding, International Journal of Heat and Fluid Flow, 2012, 34, 117-125.
40. Dan Wang, Jun Shen and Linzhi Wang. Effects of the types of overlap on the mechanical properties of FSSW welded AZ series magnesium alloy joints. International Journal of Minerals, Metallurgy and Materials, 2012, 19(3), 231-235.
41. Jun Shen, Dan Wang and Kai Liu. Effects of pin diameter on microstructures and mechanical properties of friction stir spot welded AZ31B magnesium alloy joints. Science and Technology of Welding and Joining, 2012, 17(5), 357-363.
42. Jun Shen, Linzhi Wang, Dong Peng and Dan Wang. Effects of CaF2 coating on the microstructures and mechanical properties of tungsten inert gas welded AZ31 magnesium alloy joints. Metallurgical and Materials Transactions A, 2012, 43A, 4397-4405.
43. Jun Shen, Linzhi Wang, Mali Zhao, Dan Wang and Nan Xu. Effects of activating fluxes on pulsed laser beam welded AZ31 magnesium alloy. Science and Technology of Welding and Joining, 2012, 17(8), 665-671.
44. Jun Shen, Dong Min and Dan Wang. Effects of heating process on the microstructures and tensile properties of friction stir spot welded AZ31 magnesium alloy plates. Materials & Design, 2011, 32, 5033- 5037.
45. Qiang Zhu, Yu-cheng Lei, Xi-zhang Chen, et al., Microstructure and mechanical properties in TIG welding of CLAM steel, Fusion Engineering and Design, 2011, 86, 407-411.
46. Nan Xu, Jun Shen, Weidong Xie, Linzhi Wang, Dan Wang and Dong Min. Abnormal distribution of microhardness in tungsten inert gas arc butt-welded AZ61 magnesium alloy plates. Materials Characterization, 2010, 61, 713-719.