Journal papers

      Jiang J., Xiong Y., Zhang Z., Rosen, D. “Machine learning integrated design for additive manufacturing”, Journal of Intelligent manufacturing,2020. 

      Jiang J., Xu X., Xiong Y., et al. “A novel strategy for multi-part production in additive manufacturing”, The International Journal of Advanced Manufacturing Technology, 2020.

     Jiang J., Zhong R., Newman S., “A Review of Multiple Degrees of Freedom for Additive Manufacturing Machines”, International Journal of Computer Integrated Manufacturing, 2020. 

      Jiang J. “A novel fabrication strategy for additive manufacturing processes”, Journal of Cleaner Production, 2020.

      Jiang J., Ma Y., “Path planning strategies to optimize accuracy, quality, build time and material use in additive manufacturing: a review”, Micromachines, 2020.

      Jiang J., Yu C., Xu X., et al. “Achieving better connections between deposited lines in additive manufacturing via machine learning”, Mathematical Biosciences and Engineering, 2020. 

        Jiang J., Lou J., Hu G. “Effect of Support on Printed Properties in Fused Deposition Modelling Processes”, Virtual and Physical Prototyping. 2019. 

       Jiang J., Hu G., Li X., Xu X., Zheng P., Stringer J. “Analysis and Prediction of Printable Bridge Length in Fused Deposition Modelling Based on Back Propagation Neural Network”, Virtual and Physical Prototyping. 2019.

       Jiang J., Xu X., Stringer J. “Optimization of multi-part production in additive manufacturing for reducing support waste”, Virtual and Physical Prototyping. 2019. 

       Jiang J., Xu X., Stringer J. “Optimization of Process Planning for Reducing Material Waste in Extrusion Based Additive Manufacturing”, Robotics and Computer-integrated Manufacturing, 2019. 

        Jiang, J., Stringer, J., X. Xu. “Support Optimization for Flat Features via Path Planning in Additive Manufacturing”, 3D Printing and Additive manufacturing, 2019. 

       Jiang, J., Stringer, J., X. Xu, R. Zhong. “Investigation of Printable Threshold Overhang Angle in Extrusion-based Additive Manufacturing for Reducing Support Waste”, International Journal of Computer Integrated Manufacturing, 2018;31:961–9. 

       Jiang J., Fu Y., “A Short Survey of Sustainable Material Extrusion Additive Manufacturing”, Australian Journal of Mechanical Engineering, 2020.

       Jiang J., Weng F., Gao S., Stringer J., Xu X. Guo P. “A Support Interface Method for Easy Part Removal in Direct Metal Deposition”, Manufacturing letters, 2019;20:30-33. 

      Yu C., Jiang J.* “A Perspective on Using Machine Learning in 3D Bioprinting”, International Journal of Bioprinting, 2020. 

       Jiang J., Xu X., Stringer J. “Support Structures for Additive Manufacturing: A Review”, Journal of Manufacturing and Materials Processing. 2018; 2(4):64.

       Weng F., Gao S., Jiang J., Wang J., Guo P., “A novel strategy to fabricate thin 316L stainless steel rods by continuous direct metal deposition in Z direction”, Additive Manufacturing, 2019:27:474-481. 

       Huang B., Wang W., Ren S., Zhong R., Jiang J. “A proactive task dispatching method based on future bottleneck prediction for smart factory”, International Journal of Computer Integrated Manufacturing. 2019. 

       Jiangmin Xia, Zhuying Li, Jiang J., Xiaodong Zhang “Effect of Flow Rates on erosion corrosion behavior of hull steel in real seawater”, International Journal of Electrochemical Science, 2021. 

       Zhenkun Guo, Guobiao Hu, Jiang J., Liuding Yu, Xin Li, Junrui Liang, “Theoretical and experimental study of the vibration dynamics of a 3D-printed sandwich beam with hourglass lattice truss core”, Frontiers in Mechanical Engineering, 2021.

Conference papers

       Jiang, J., Stringer, J., X. Xu, P. Zheng, “A benchmarking part for evaluating and comparing support structures of additive manufacturing”, 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018),14-17 May 2018, Singapore.

      Jiang J., Xu X, Stringer J. “A new support strategy for reducing waste in additive manufacturing”. The 48th International Conference on Computers and Industrial Engineering (CIE 48), Auckland: 2018, p. 1–7.

      Jiang J., Xu X, Stringer J. “Effect of Extrusion Temperature on Printable Threshold Overhang in Additive Manufacturing”, CIRP Manufacturing Systems Conference 2019, June 12-14, 2019, Ljubljana, Slovenia.