19. Nan Zheng, Baohong Tong, Guotao Zhang, et al. Numerical study on flow and heat transfer characteristics of two oil droplets impinging the wall simultaneously under the influence of micro-bubble [J], International Journal of Heat and Mass Transfer, 2022,190: 122793.

18. Shen Minmin, Sun Chuanbin, Tong Baohong, et al. Research on wave suppression mechanism of porous baffle based on vortex dynamics[J]. Journal of Engineering for the Maritime Environment, 2022.(网络在线发表)

17. Guotao Zhang ; Ma Zhen; Yin Yanguo; Wei Xicheng. Influence of initial permeability on seepage behavior of the lubricant stored in hydrogel surface[J]. Tribology International, 2022, 173. 

16. Guotao Zhang*, Yingkang Shi, Baohong Tong* , Yunlong Jiao, Yanguo Yin, Kun Liu. Exudation behavior and pinning effect of the droplet on slippery liquid-infused porous surfaces (SLIPS). Surface & Coatings Technology, 2022, 433, 128062.

15. Guotao Zhang, Yingkang Shi, Baohong Tong, Yunlong Jiao, Yanguo Yin, Kun Liu, Unsteady seepage of lubricant from a loaded porous surface [J]. Physics of fluids, 2022, DOI: 10.1063/5.0096385.

14. Guotao Zhang, Weijie Cai, Yanguo Yin, Xicheng Wei. Analysis of seepage and lubrication characteristics of bilayer porous bearing under mixed lubrication [J]. Industrial lubrication and tribology, 2022 . 10.1108/ILT-03-2022-0080

13. Nan Zheng, Baohong Tong, Guotao Zhang, et al.Heat Transfer Characteristics ofSuccessive Oil Droplet Impingement under Minimum Quantity Lubrication[J]. Physicsof Fluids, 2021,33(3): 033318.

12. 沈民民,孙船斌,童宝宏等.多孔挡板影响液体晃荡冲击载荷特征的研究[J/OL]. 中国机械工程, 2022.(网络在线首发)

11. 童宝宏,苏家磊,张国涛,郑楠,郭丹,王伟,刘焜.气流对含气泡油滴撞壁铺展流动过程的影响[J].机械工程学报,2020,56(17):216-224.

10. Guotao Zhang; Baohong Tong; Yanguo Yin. Temperature distribution and heat generating/transfer mechanism of the circular bilayer porous bearing for thermo-hydrodynamic problem[J]. International Journal of Heat and Mass Transfer, 2020, 149(C) : 119134-119134.

9. Guotao Zhang; Baohong Tong; Shubao Yang; Liping Shi; Yanguo Yin. Effect of percolation on hydrodynamic lubrication of rough bilayer porous bearing with circular contact[J]. Industrial Lubrication and Tribology, 2020, 72(1) : 109-115. 

8. Guotao Zhang; Baohong Tong; Xingquan Zhang; Tao Wang; Yanguo Yin. Thermo-hydrodynamic modeling and analysis for circular bilayer self-lubricating bearing[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 42(5) : 1-21. 

7. Jian-hong Zhou,Bao-hong Tong,Wei Wang,Jia-lei Su,Xiao-lei Hu. Numerical simulation of bubble changes in an oil film impacted by oil droplets via a coupled level set and volume-of-fraction method[J]. Fluid Dynamics Research,2019,51(2):

6. 张国涛,尹延国,童宝宏,张兴权.双层孔隙铁基粉末冶金材料可控制备及自润滑机理分析[J].金属学报,2019,55(11):1448-1456.

5. 张国涛,童宝宏,尹延国,解挺.环面接触复层多孔轴承热流体动压润滑性能及生/传热机制分析[J].机械工程学报,2019,55(21):98-107.

4. 张国涛,尹延国,李蓉蓉,许明,李聪敏,丁曙光.孔隙渗流对环面复层含油轴承润滑性能的影响[J].摩擦学学报,2019,39(02):228-234.

3. 周剑宏,  童宝宏,  王伟,  苏家磊.  油滴撞击油膜层内气泡的变形与破裂过程的数值模拟[J].物理学报, 2018, 67(11):114701. 

2. 吴亮,童宝宏,郭丹,马丽然,胡晓磊.油-气润滑流动行为对点接触副摩擦特性的影响[J].摩擦学学报,2018,38(06):700-710.

1. 童宝宏,杨文,刘庆运,叶小华,时礼平.柱塞泵螺旋沟槽式柱塞-铜套副缝隙流场流动与均压特性[J].农业工程学报,2018,34(02):55-63.

授权发明专利

[1] 张国涛,袁强,张志伟,马亮亮,童宝宏,王孝义. 一种原位造孔与润滑增强的铁基轴承材料及其制备方法[P]. 安徽省：CN113351862A,2022年授权

[2] 张国涛,袁强,王孝义,张志伟,马亮亮,史英康. 一种轴承表面自润滑减摩层的制备方法[P]. 安徽省：CN113373490A,2021-09-10.  2022授权

[3] 张国涛,王孝义,史英康,夏清华,杨晓红,黄显贵,杨远航. 一种具有供油润滑功能的鼓形齿轮[P]. 安徽省：CN112879527A,2021-06-01. 2022 授权

[4] 杨晓红,夏清华,张国涛,王孝义,李天超,杨远航,黄显贵,朱长江,雷海涛. 一种具有轴向大伸缩功能的鼓型齿联轴器[P]. CN112524167B, 2021授权

[5] 尹延国, 张国涛, 尹利广, 刘振明, 焦明华, 解挺, 俞建卫, 田明. 一种钛铁基含油减摩材料.（授权专利号：ZL201510180573.1）

[6] 尹延国, 张国涛, 刘振明, 尹利广. 一种高强减摩双层铁基粉末冶金材料及其制备方法.（授权专利号：ZL201610475557.X）

[7] 尹延国, 张国涛, 王涛, 刘振明, 尹利广, 李吉宁, 田明. 一种铁基粉末冶金零件表面渗硫工艺. （授权专利号：ZL201510712588.8）

[8]  尹延国，李蓉蓉，张开源，张国涛，一种可控孔隙结构的铁基含油轴承材料及其制备方法，2020 授权

[9] 尹延国, 曾庆勤, 张国涛, 田明. 一种高强无铅铜基滑动材料及其制备方法.（授权专利号：ZL201610999349.X）

[10] 尹延国, 曾庆勤, 张国涛, 田明. 一种无铅铜基滑动轴承材料及其制备方法. （授权专利号：ZL201610990014.1）

[11] 张国涛,张志伟,王孝义,夏清华,杨晓红,朱长江,李天超. 一种具有供油回油功能的自润滑齿轮及密封组件[P]. 安徽省：CN112879528A,2021-06-01. 2022授权