期刊论文
[1] Z. Shen*, W.Y. Li , Y. Ding , W. Hou , X.C. Liu , W. Guo , H.Y. Chen , X. Liu , J. Yang , A.P. Gerlich. (2020). Material flow during refill friction stir spot welded dissimilar Al alloys using a grooved tool. Journal of Materials Processing Technology.
[2] Su, J., Yang, J.*, Li, Y., Yu, Z., Chen, J., Zhao, W., Liu, H. & Tan, C. (2020). Microstructure and mechanical properties of laser fusion welded Al/steel joints using a Zn-based filler wire. Optics & Laser Technology, 122, 105882.
[3] Li, Y. *, Liu, Y., & Yang, J. (2020). First principle calculations and mechanical properties of the intermetallic compounds in a laser welded steel/aluminum joint. Optics & Laser Technology, 122, 105875.
[4] Xiao, R., Yang, J.*, Tan, C., Shen, Z., & Yu, Z. (2019, November). Fabrication of high strength and lightweight dissimilar material joints by laser: a review. In Advanced Laser Processing and Manufacturing III (Vol. 11183, p. 111830B). International Society for Optics and Photonics.
[5] Wei, S., Deng, P.*, Jiangtong, Q., & Jin, Y. (2019). Tensile deformation behavior of Ti-6Al-4V sheet at elevated temperature. Materials Research Express, 6(11), 116585.
[6] Yang, J.*, Hu, A., Li, Y., Zhang, P., Saha, D. C., & Yu, Z. (2019). Heat input, Intermetallic Compounds and Mechanical Properties of Al/steel Cold Metal Transfer Joints. Journal of Materials Processing Technology, 272, 40-46.
[7] Yang, J.*, Su, J. H., Yu, Z. S., Zhang, G. Z., Lin, S. B., Li, Y. L., & Zhou, N. Y. (2019). Influence of Ni interlayer width on interfacial reactions and mechanical properties in laser welding/brazing of Al/Mg lap joint. Science and Technology of Welding and Joining, 1-8.
[8] Chen J.S., Zhang Y.Z., Yu Z.S., Zhang P.L., Zhao W.Q., Yang. J*. and Wu D. (2019). Interface Growth and Void Formation in Sn/Cu and Sn0.7Cu/Cu Systems. Applied Science, 8(12), 2703.
[9] Zhao, W.*, Wang, L., Yu, Z., Chen, J., & Yang, J. (2019). A processing technology of grooves by picosecond ultrashort pulse laser in Ni alloy: Enhancing efficiency and quality. Optics & Laser Technology, 111, 214-221.
[10] Yang, J.*, Yu, Z., Li, Y., Zhang, H., & Zhou, N. (2018). Influence of alloy elements on microstructure and mechanical properties of Al-steel dissimilar joint, Welding in the World, 62(2), 1-7.
[11] Yang, J.*, Yu, Z., Li, Y., Zhang, H., & Zhou, N. (2018). Laser welding/brazing of 5182 aluminium alloy to zek100 magnesium alloy using a nickel interlayer. Science & Technology of Welding & Joining, (6), 1-8.
[12] Yang, J.*, Chen, J.S., Zhao, W.Q., Zhang, P.L., Yu, Z. *, Li, Y., Zeng, Z., & Zhou, N., (2018). Diode Laser Welding/brazing of Aluminum Alloy to Steel Using a Nickel Coating. Applied Science, 8(6), 922.
[13] Yang, J.*, Yu, Z.S., Li, Y.L., Zhang, H., Guo, W., Peng, P., & Zhou, Y.N. (2018). Formation and toughening mechanisms of dispersions in interfacial intermetallics of dissimilar laser Al/steel joints. Journal of Materials Engineering and Performance, 27(8), 4107-4114.
[14] Yang, J.*, Li, Y., Zhang, H. (2016). Microstructure and mechanical properties of pulsed laser welded Al/steel dissimilar joint. Transactions of Nonferrous Metals Society of China, 26(4), 994-1002.
[15] 崔庆波, 李玉龙*, 杨瑾, 王裕波, & 余啸. (2017). 化学镀锡层对镁铝异种金属超声波焊接的影响. 材料科学与工艺, 25(2), 35-38.
[16] Yu, X., Yang, J., Yan, M., Hu, X.W., & Li, Y.L*. (2016). Kinetics of wetting and spreading of AgCu filler metal over Ti-6Al-4V substrates. Journal of Materials Science, 51(24): 10960-10969.
[17] Li, Y., Wen, C., Zhang, H., Yang, J., Yan, M., & Jiang, J. (2016). An electroplating method for surface mounting optical fiber sensors on the metal substrate. IEEE Photonics Technology Letters, 28(17), 1811-1814.
[18] Yang, J., Li, Y. L.*, Zhang, H., Guo, W., & Zhou, Y. (2015). Control of interfacial intermetallic compounds in Fe-Al joining by Zn addition. Materials Science & Engineering A, 645: 323-327.
[19] Yang, J., Li, Y.*, Zhang, H., Guo, W., Weckman, D., & Zhou, N. (2015). Dissimilar laser welding/brazing of 5754 aluminum alloy to DP 980 steel: mechanical properties and interfacial microstructure. Metallurgical & Materials Transactions A, 46(11), 5149-5157.
[20] Yang, J., Zhang, H., & Li, Y.L*. (2015). Optimization of nd:yag laser welding of aluminum alloy to stainless steel thin sheets via taguchi method and response surface methodology (RSM). Lasers in Engineering, 31(3), 141-159.
[21] 杨瑾, 张华, 李玉龙*. (2013). 铝钢异种金属激光焊接研究进展[J]. 应用激光, 36(5): 74-80.
[22] 杨瑾, 李玉龙*, 张华. (2013). TC4钛合金感应加热钎焊有限元分析[J]. 热加工工艺, 11: 50-55.
[23] 李玉龙, 杨瑾*，禹业晓. (2011). 钛及钛合金钎焊特点及现状[J].热加工工艺, 40(9): 130-136.
[24] Yang, J., Li, Y.L.*, & Li W., (2011). Brazing of Low Carbon-Steel Automotive Radiator Pipe Using of Cu-Zn Alloy. Advanced Materials Research, 233-235: 2718-2721.
[25] Li, Y.L.*, He P., Feng J.C., & Yang, J. (2011). Development of Interface Reaction Layer between TiAl Alloy and 42CrMo Brazing Joints and Its Effect on Mechanical Property. Rare Metal Materials and Engineering, 41(10): 1833-1836.
[26] Li, Y.L.*, Yang, J., & Zhang H. (2010). Effects of Metal Coat on the Fiber Bragg Grating Sensing Character. Proceedings of 2010 International Conference on Broadcast Technology and Multimedia Communication.
学术会议
[1] Materials Science & Technochology 2014，2014 (美国，宾州匹兹堡)——分会报告
[2] Advanced Materials Welding and Joining Techology Workshop 2015，2015 （加拿大、滑铁卢）——主旨报告
[3] 第70界IIW国际焊接年会，2017（上海）——分会报告
[4] 第十三届华东六省一市焊接技术交流会，2017（南昌）——分会报告
[5] The 1st International Symposium on Advanced Novel Material，2018 （上海）——主旨报告
[6] 中国机械工程学会焊接学会青年工作委员会第二届学术研讨会，2018（镇江）——分会报告
[7] 第三届新能源汽车工程大会，2018（上海）——特邀报告
[8] 第22届全国钎焊及特种连接技术交流会，2018（沈阳）——分会报告
[9] 4th International Conference on Nanojoining and Microjoining 2018 (NMJ2018)，2018（日本，奈良）——主旨报告
[10] 2019 年亚洲光电子会议，2019 （杭州）——特邀报告
[11] 第40届智能制造与设计（MATADOR）国际会议——分会报告
[12] 23次全国焊接学术会议，2019 （西安）——分会报告
专利
[1] 杨瑾、于治水、张天理、赵万芹、苏佳浩，一种镁铝异种金属的激光填料焊工艺，申请号：201810317865.9
[2] 赵万芹、梅雪松、于治水、杨瑾，一种金属焊接头的超快激光差异微纳米织构方法，申请号：201810307197.1
[3] 高辰恺、杨瑾、袁易泽、徐文虎，高熵合金 CoCrFeMnNi 及其雾化制粉法制取工艺，申请号：201910236065.9
[4] 刘红兵、吴頔、杨瑾，一种用于检测空心管件焊缝的检测系统以及检测方法，申请号：201910337231.4
[5] 杨瑾、肖睿、刘红兵、苏佳浩、陈捷狮、于治水、曾志，一种铝钢连续激光熔钎填丝焊的工艺，申请号：201910137437.3
