周梦然 - 清华大学 - 机械工程系

个人简介

教育背景日本大阪大学，材料科学系博士材料科学与工程专业 2017.04—2020.03 日本大阪大学，材料科学系硕士材料科学与工程专业 2015.04—2017.03 工作履历清华大学机械系材料成形制造团队助理研究员 2022.06—至今清华大学机械系材料成形制造团队博士后 2020.06—2022.06 澳大利亚莫纳什大学材料科学与工程系访问研究员 2019.01—2019.02 英国剑桥大学先进材料研究院访问研究员 2018.04—2018.05 日本产业综合技术研究所(AIST) 轻合金设计中心访问研究员 2017.06—2017.09 大阪大学基础工学研究科纳米材料科学中心访问研究员 2016.06—2016.09 奖励与荣誉博士期间获得日本文部科学省（MEXT）主持Leading Program博士项目奖学金日本焊接学会2017年优秀研究奖“Mg-Li合金的搅拌摩擦焊接”

研究领域

主要从事基于热塑性变形条件下轻合金材料的组织性能调控及其功能性改善与开发。目前主要科研方向如下：高强耐腐蚀超轻合金制备及其连接技术生物亲和镁合金设计，制备和性能改善低温超塑性轻合金制备材料流动与变形机制原位表征观测

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

M Zhou, Y Sun, M Yoshiaki, K Ushioda, H Fujii *, "Quasi-in-situ investigation into the microstructure and texture evolution of pure magnesium during friction stir welding." Journal of Magnesium and Alloys (2020), IF:10.08. M Zhou, X Huang, Y Morisada, H Fujii *, Y Chino, "Effects of Ca and Sr additions on microstructure, mechanical properties, and ignition temperature of hot-rolled Mg–Zn alloy." Materials Science and Engineering: A 769(2020).IF:5.23. M Zhou, Y Morisada, H Fujii *, "Effect of Ca addition on the microstructure and the mechanical properties of asymmetric double-sided friction stir welded AZ61 magnesium alloy." Journal of Magnesium and Alloys 8.1(2019).IF:10.08. M Zhou, Y Morisad, H Fujii *, T Ishikawa, "Mechanical properties optimization of AZX612-Mg alloy joint by double-sided friction stir welding." Journal of Materials Processing Technology (2017):91-99.IF:5.55. M Zhou, Y Morisada, H Fujii*, J Wang, Pronounced low-temperature superplasticity of friction stir processed Mg–9Li–1Zn alloy." Materials Science and Engineering A 780.7(2020):139071.IF:5.23. M Zhou, Y Morisada, H Fujii*, J Wang, "Microstructure and mechanical properties of friction stir welded duplex Mg-Li alloy LZ91." Materials Science and Engineering A, 773.Jan.31(2020):138730.1.IF:5.23. Z Zeng, M Zhou, P Lynch, F Mompiou, Q Gu, M Esmaily, Y Yan, Y Qiu, S Xu, H Fujii, C Davies, J Nie, N Birbilis*, "Deformation modes during room temperature tension of fine-grained pure magnesium". Acta Materialia, 116648 (2021).IF:8.23. S Zhang, G Chen, T Qu, J Wei, Y Yan, Q Liu, M Zhou, G Zhang, Z Zhou, H Gao, D Yao, Y Zhang, Q Shi*, H Zhang, "A novel aluminum-carbon nanotubes nanocomposite with doubled strength and preserved electrical conductivity." Nano Research (2021): 1-7.IF:8.89. Y Liu, G Chen, H Zhang, C Yang, S Zhang, Q Liu, M Zhou, Q Shi*. “In situ exfoliation of graphite for fabrication of graphene/aluminum composites by friction stir processing”, Materials Letters 301(2021)130280. IF:3.42. F Long, G Chen, M Zhou, Q Shi, Q Liu*, Simultaneous enhancement of mechanical properties and corrosion resistance of as-cast Mg-5Zn via microstructural modification by friction stir processing, Journal of Magnesium and Alloys (2021). Accepted. IF:10.08. Z Zeng*,M Zhou*, et. al. “Corrosion resistant and high-strength dual-phase Mg-Li-Al-Zn alloy by friction stir processing”, Communications Materials, (2021). IF:6.78 M Zhou, et. al. “A novel Fe/Cu interface with excellent mechanical properties fabricated by friction stir welding”, Journal of Manufacturing Processes, (2021), IF:4.46. M Zhou, et.al, Effect of the processing route on the microstructure and mechanical behavior of superlight Mg-9Li-1Zn alloy via friction stir processing, Journal of Magnesium and Alloys (2020), IF:10.08.