杨军 - 中国科学院兰州化学物理研究所 - 固体润滑国家重点实验室

研究领域

特殊工况润滑材料技术纳米晶材料和高温润滑抗磨材料研究

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

PQ La*, J Yang, DJH Cockayne, WM Liu, QJ Xue, Bulk nanocrystalline Fe3Al-based material prepared by aluminothermic reaction, Adv Mater, 2006, 18(6): 733-737. J Yang*, JQ Ma, WM Liu*, QL Bi, QJ Xue, Large-scale Fe–C nanoeutectic alloy prepared by a self-propagating high-temperature synthesis casting route, Scripta Mater, 2008, 58: 1074-1077. LJ Li, QL Bi*, J Yang*, LC Fu, LP Wang, SC Wang, WM Liu, Large-scale synthesis of Al–Cu–Fe submicron quasicrystals, Scripta Mater, 2008, 59: 587-590. XH Zhang, J Yang*, JQ Ma, QL Bi, J Cheng, YM Liang, WM Liu, Microstructures and mechanical properties of Fe-28Al-5Cr/TiC composites produced by hot-pressing sintering, Mater Sci Eng A, 2011, 528: 6819-6824. XH Zhang, JQ Ma, J Yang*, QL Bi, WM Liu,Dry-sliding tribological behaviour of Fe-28Al-5Cr/TiC composites, Wear, 2011, 271: 881-887. L Wang, JQ Ma, J Yang*, QL Bi, LC Fu WM Liu, Dry-sliding tribological properties of a nano-eutectic Fe1.87C0.13 alloy, Wear, 2010, 268: 991-995. LC Fu, J Yang*, QL Bi, JQ Ma, WM Liu, Combustion synthesis and characterization of bulk nanostructured Fe88Si12 alloy, IEEE Trans Nanotechnology, 2010, 9: 218-222. LC Fu, J Yang*, QL Bi, LJ Li, WM Liu, Microstructure and mechanical behavior of nano-eutectic Fe83B17 alloy prepared by a self-propagating high temperature synthesis combining rapid solidification, J. Phys. D: Appl. Phys, 2008, 41: 235401. J Yang, PQ La*, WM Liu, JQ Ma, QJ Xue, Tribological properties of Fe3Al-Fe3AlC0.5 composites under dry sliding, Intermetallics, 2005, 13: 1184-1189. J Yang*, PQ La, WM Liu, QJ Xue, Tribological properties of FeAl intermetallics under dry sliding, Wear, 2004, 257: 104-109.