Extraction and separation of Li+ from high-ratio Mg/Li salt lak brines by [C2mim][NTf2] ionic liquid and a homemade extractor

Abstract: The separation and recovery of Li+ from high-ratio Mg/Li salt lake brines possess a big significance, especially the demand for Li+ has grown rapidly in recently years. The ionic liquid [C2mim][NTf2] with tributyl phosphate (TBP) and sulfonated kerosene system was hired as an extractant to extract Li+ from salt lake brines with a high-ratio of Mg/Li experimentally by using a homemade membrane emulsification circulation (MEC) extractor. From the single-element extraction, the extraction efficiency of Li+ could be up to 96.0% within 8 min. In view of the multi-element experiment, the MEC extractor manifested better extraction performance compared with oscillating and stirring extraction. The extraction ability of the extractant for Li+ could reach the ideal level without the addition of any co-extraction agents (Fe3+ and ClO4−). The new extraction system could have extensive applications since the extraction performance was insensitive to pH and temperature. The optimal extraction conditions for Li+ were VTBP: V[C2mim][NTf2]: Vkerosene = 8:1:1, R(O/A) = 1. In addition, the stripping efficiency of Li+ could be improved by increasing the A/O and stripping stage. When the stripping stage reached 3, 94.5% of Li+ could be extracted successfully by using 2 mol/L HCl. The slope method and FT-IR analysis manifested that the TBP-[C2mim][NTf2]-sulfonated kerosene system extracted Li+ by an anion coordination mechanism in the form of [Li·2TBP]+org. The DFT calculations were used for revealing the reaction between Li+ and P = O. The results are expected to provide experimental data and a theoretical basis for practical application.

doi.org/10.1016/j.desal.2023.116450