姓名：张东升

办公室：宝山校区（HE204）

通信地址：上海市上大路99号HE楼，邮编：200444

电子邮件：donzhang@staff.shu.edu.cn

研究方向

实验力学；

生物力学；

教育经历

1983.09-1987.07 国防科技大学应用力学系飞行器结构强度专业本科，工学学士

1987.09-1990.02 国防科技大学应用力学系实验力学专业硕士研究生，工学硕士

1990.03-1993.03 天津大学工程力学系实验力学专业本科博士研究生，工学博士

工作经历

1993.04-2000.08 国防科技大学航天技术系教师（其间：1993.04讲师，1995.01副教授）

2008.08-2003.08美国马里兰大学机械工程系，高级研究员

2003.09 至今 上海大学上海市应用数学和力学研究所/力学与工程科学学院力学系，教授

近三年主要科研项目

[1] 国家自然科学基金面上项目，橡胶类涂层粘接质量的无损检测方法与系统集成，12072184，项目负责人，20210101-20241231

[2] 国家科技部重点研发计划重大仪器设备研制专项，大型设施挠度非接触测量仪，2018YFF01014200，项目负责人，20181001-20210930，

[3] 国家自然科学基金重大仪器设备研制项目，基于摄像测量的风电叶片机械故障在线监测方法和仪器研制，11727804，上海大学方项目负责人，20180101-20231231，

[4] 国家自然科学基金面上项目，激光剪切散斑干涉与红外成像复合的无损检测新方法与设备试制， 11672347，项目负责人，20170101-20201231

[5] 复合材料螺旋桨动态变形的三维光学非接触测量技术，中国船舶重工集团公司第七〇二研究所，项目负责人，2019-2020

[6] 错位散斑无损检测系统，航天材料与工艺研究所，项目负责人, 2020-2021

[7] 基于图像识别的应变片三维坐标高精度获取技术研究，北京强度环境研究所，项目负责人，2021-2022

[8] 红外热成像检测仪，大连理工大学，项目负责人，2021-2021

[8 ]加热片粘接质量红外检测系统研制，上海卫星装备研究所，项目负责人，2021-2021

近三年主要科研论文

Su Z, Pan J, Zhang S, Wu S, Yu Q, Zhang D*, Characterizing dynamic deformation of marine propeller blades with stroboscopic stereo digital image correlation, Mechanical Systems and Signal Processing 162 (2022) 108072

Wei Y, Ding L, Han Y, Luo Y, Su Z, Zhang D*, Characterizing defects in materials with fusion of thermography and shearography, Measurement, 182 (2021) 109736

Su Z, Yu Z, Guan B, Yu Q, Zhang D*, High-accurate camera calibration in three-dimensional visual displacement measurements based on ordinary planar pattern and analytical distortion model, Opt. Eng. 60(5), 054104 (2021), doi: 10.1117/1.OE.60.5.054104

Su Z, Pan J, Lu L,Dai M, He X, Zhang D*, Refractive three-dimensional reconstruction for underwater stereo digital image correlation, Optics Express, Vol. 29, No. 8 2021, 12131

李明，苏志龙，张东升*，基于仿射变换矫正相机抖动的数字图像相关测量方法，光学学报，v 41(9) ,2021，0912002.

潘济宇，张水强，苏志龙，武坤，张东升*， 基于数字图像相关方法的水下螺旋桨三维变形测量，光学学报， 41(12): 2021，1212001.

王宗盛，苏志龙，韩永胜，关棒磊，张东升*, 于起峰， 基于图像特征分布优化的相机外参自标定，中国科学：技术科学，51(11), 2021， 1410-1418.

Wei Y, Zhang S, Luo Y, Ding L, Zhang D*, Accurate Depth Determination of Defects in Composite Materials using Pulsed Thermography, Composite Structures 267 (2021) 113846

Ding L, Zhang J, Shu Q, Liu S, Xuan Y, Gong X, Zhang D*, Magnetismresponsive Anisotropic Film with Self-sensing and Multifunctional Shape Manipulation, ACS Applied Materials & Interfaces, 2021, 13 (11) , 13724-13734.

Ye Y, Li X, Feng J, Zhang D*, Dual-lens system in enlarging the viewing angle for the Michelson interferometer, Applied Optics, 60(6), 1529-1534 (2021)

Yang D, Su Z, Zhang S, Zhang D*, Real-time Matching Strategy for Rotary Objects using Digital Image Correlation, Applied Optics, 59(22), 6648-6657 (2020)

Wei Y, Su Z, Mao S, Zhang D*., An Infrared Defect Sizing Method Based on Enhanced Phase Images, Sensors 2020, 20, 3626; doi:10.3390/s20133626

Feng W, Su Z, Han Y, Liu H, Yu Q, Liu S, Zhang D*, Inertial measurement unit aided extrinsic parameters calibration for stereo vision systems, Optics and Lasers in Engineering, 134, (2020) 106252

Su Z, Lu L, Yang F, He X, Zhang D*, Geometry constrained correlation adjustment for stereo reconstruction in 3D optical deformation measurements, Optics Express, Vol. 28, No. 8, 12219, 2020

Su Z, Lu L, He X, Yang F, Zhang D*, Recursive-iterative digital image correlation based on salient features, Optical Engineering, 59(3), 034111 (2020), doi: 10.1117/1.OE.59.3.034111

Zhang S, Liu Y, Shang J, Ujjaman C, Khaled M, Zheng Y, Cai J, An B, Zhang D, Zheng R, Enamel-inspired materials design achieving balance of high stiffness and large energy dissipation, Journal of the Mechanical Behavior of Biomedical Materials, 103(1): 0-103587. 2020

Feng W, Zhang S, Liu H, Yu Q, Wu S, Zhang D*, Unmanned aerial vehicle-aided stereo camera calibration for outdoor applications, Optical Engineering, 59(1), 014110 (2020), doi: 10.1117/1.OE.59.1.014110.

Wang S, Zhang S, Li X, Zou Y, Zhang D*, Development of monocular video deflectometer based on inclination sensors, Smart Structures and Systems, Vol. 25, No. 5, 2019, pp. 607~616.

Zhang S, Li A, Zheng Y, Zhang D*, Mechanical analysis of C/C composite grids in ion optical system, Applied Mathematics and Mechanics, 40(11), 1589–1600 (2019)

Zhang S, Wang Z, Han Y, Zheng Y, Zhang D*, Experimental and Theoretical Studies on Thermo-mechanical Fatigue Test for Aluminum Cast Alloy, Fatigue & Fracture of Engineering Materials & Structures, DOI: 10.1111/ffe.13076, 2019

Wu R*, Zhang D, Yu Q, Jiang Y, Arola D, Health monitoring of wind turbine blades in operation using three-dimensional digital image correlation, Mechanical Systems and Signal Processing, 2019 秋季, 130(2): 470-483

Ye Y, Ma K, Zhou H, Arola D, Zhang D*, An automated shearography system for cylindrical surface inspection, Measurement, v 135, March 2019, 400-405

Liu Y, Gao S, Han Y, Yang Q, Arola D, Zhang D*, Bearing capacity of ceramic crowns before and after cyclic loading: An in vitro study, Journal of the Mechanical Behavior of Biomedical Materials, 87 (2018) 197–204

Liu Y, Xu Y, Su B, Arola D, Zhang D*, The Effect of Adhesive Failure and Defects on the Stress Distribution in All-ceramic Crowns, Journal of Dentistry, 2018, DOI：https://doi.org/10.1016/j.jdent.2018.05.020

Guo E, Liu Y, Han Y, Arola D, Zhang D*, Full-field Stress Determination in Photoelasticity with Phase Shifting Technique, Measurement Science and technology, 2018, 29 ,045208

Dong C, Li K, Jiang Y, Arola D, Zhang D*, Evaluation of Thermal Expansion Coefficient of Carbon Fiber Reinforced Composites Using Electronic Speckle Interferometry, Optics Express, 2018 , 26 (1) :531

Zhang S, Zhang Y, Chen M, Wang Y, Cui Q, Wu R, Arola D, Zhang D*, Characterization of the Mechanical Properties of Aluminum Cast Alloy at Elevated Temperature, Applied Mathematics and Mechanics, 39(7), 967–980 (2018)