李毅波 - 中南大学 - 机电工程学院

个人简介

教育背景: 1999.07~2003.07，湘潭大学机械工程学院，本科，学士 2003.09~2006.02，中南大学机电工程学院，研究生，硕士 2009.09~2013.05，中南大学机电工程学院，研究生，博士 2018.07~2019.07，帝国理工学院，访问学者工作经历: 2006.02~2009.07，美国MSC.Software软件公司，工程师，产品经理 2009.07~2014.09，中南大学机电工程学院，讲师 2014.09~，中南大学机电工程学院，副教授

研究领域

轻量化结构的粘接强度、裂纹扩展与剩余寿命评估；金属塑性加工工艺与装备；多学科数值仿真

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1] LIAO Y, LI Y*, PAN Q, et al. Residual fatigue life analysis and comparison of an aluminum lithium alloy structural repair for aviation applications [J]. Engineering Fracture Mechanics, 2018, 194: 262-280. [2] LI J, LI Y*, HUANG M, et al. Improvement of aluminum lithium alloy adhesion performance based on sandblasting techniques [J]. International Journal of Adhesion and Adhesives, 2018, 84: 307-316. [3] YUAN Shun, LI Yi-bo*, HUANG Ming-hui. Determination of key parameters of Al–Li alloy adhesively bonded joints using Cohesive Zone Model. J. Cent. South Univ. (2018) 25 [4] PAN Y, LI Y*, HUANG M, et al. Noise source identification and transmission path optimisation for noise reduction of an axial piston pump [J]. Applied Acoustics, 2018, 130: 283-292. [5] PAN Q, LI Y*, HUANG M. Control-oriented friction modeling of hydraulic actuators based on hysteretic nonlinearity of lubricant film [J]. Mechatronics, 2018, 53: 72-84. [6] Pan Y, Li Y*, Ma P, et al. New approach of friction model and identification for hydraulic system based on MAPSO-NMDS optimization Elman neural network [J]. Advances in Mechanical Engineering, 2017, 9(12): 1–14. [7] P Chen, Y Li*, R Li, et al. Microstructure, mechanical properties, and wear resistance of VC p-reinforced Fe-matrix composites treated by Q&P process. International Journal of Minerals, Metallurgy, and Materials 25.9 (2018): 1060-1069. [8]潘阳，李毅波*，黄明辉等.双联轴向柱塞泵配流盘优化与流量脉动特性分析[J]. 农业机械学报,2016, 04):1-9 [9] Li Yi-Bo, Pan Qing*, Huang Ming-hui. Model-based parameter identification of comprehensive friction behaviors for giant forging press, Journal of Central South University. Journal of Central South University(English Edition). 2013,20(9): 2359-2365 [10] LU X J, LI Y B, HUANG M H. Operation-Region-Decomposition-Based Singular Value Decomposition/Neural Network Modeling Method for Complex Hydraulic Press Machines [J]. Industrial & Engineering Chemistry Research, 2013, 52(48): 17221-8. [11]李毅波, 张猛, 黄明辉. 重型模锻压机低速运行非线性摩擦力的参数辨识与补偿控制. 华南理工大学学报(自然科学版).2013,07:38-44 [12]黄明辉, 李毅波*, 张猛, 杨家旺.模锻压机超低速运行动态性能分析.中南大学学报(自然科学版).2012,43(11):4259-4266 [13] Li, Yibo, Wu, Daohui, Huang, Minghui, Lu, Xinjiang. Design of Parallel Bearing Structure for 800MN Forging Press with Consideration of Manufacturing Errors. Applied Mechanics and Materials. 2011,(52-54): 2157-2163 [14] Yibo Li, Minghui Huang, Xinjiang Lu. Improvement in Ovality of Pipeline Steel X80 with Weld Power under Multi-wire SAW Welding Process. Advanced Materials Research. 2011,(239-242 ):1823-1831