马庆贤 - 清华大学 - 机械工程系

个人简介

Education background Ph.D., Mechanical Engineering, Tsinghua University, 1993.12 M.E., Mechanical Engineering, Tsinghua University, 1989.12 B.E., Mechanical Engineering, Tsinghua University, 1987.7 Experience Department of Mechanical Engineering, Tsinghua University, Professor, 2004.12-Present, full time Department of Mechanical Engineering, Tsinghua University, Associate Professor, 1997.7-2004.11, full time Department of Mechanical Engineering, Tsinghua University, Lecturer, 1993.12-1997.6, full time Honors And Awards The Ministry of Education Science-Technology Progress Award, 2013 The Ministry of Education Science-Technology Progress Award, 2003 The CMEA Excellent paper Award, 2003 The experimental technique Award, Tsinghua University, 2003

研究领域

大型锻件控制锻造技术和理论；塑性成形物理模拟技术；核反应堆锻件成形控制；检测和质量保证技术

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Wenlong Zhao, Qingxian Ma. Microstructural Evolution of As-Cast 3.5%NiCrMoV Steel Containing Centimeter-Scale Grain Structure during Reheating and Plastic Deformation. Materials Transactions, Vols.10 (2014) pp.1568-1574 Wenlong Zhao, Qingxian Ma, Shili Zha. Mechanism for development of faults originating from compound inclusions in the forging processing 0f 30Cr2Ni4MoV heavy ingots. Materials Transactions, 2014,8 Min Liu, Qingxian Ma. Modeling and Simulation Research on Hollow Steel Ingot Forging Process of Heavy Cylinder Forging. Advanced Material Research Vols.712-715(2013) pp627-632 Luo Jin-ping, Zhong Yue-xian, Ma Qing-xian et al. Research on surface uniformity control of runner plate for 700-MW hydrogenerator. Forging and Stamping Technology, 2013,38(5):7-12 Luo Jin-ping, Zhong Yue-xian, Ma Qing-xian et al. Effect of heat treatment on hardness uniformity of 25CrMo4 used for the runner plate of 700 MW hydrogenerator. Materials Science and Technology, 2014,22（1）：7-13 Liu Xin, Zhong Yuexian, Ma Qingxian et al. Simulation on new chamfering process of nuclear turbine low-process rotor forging. Journal of Mechanical Engineering, 2010,46(24):16-21 Pan Pinli, Zhong Yuexian, Ma Qingxian et al. Simulation on forming uniformity of nuclear main pipe. Journal of Mechanical Engineering,2013,49(10):97-102 Liu Xin, Zhong Yuexian, Ma Qingxian et al. Technical control of multi-pass stretching of low pressure rotor forging. Journal of Plasticity Engineering, 2010,17（4）：1-7 Pan Pinli, Zhong Yuexian, Ma Qingxian et al. Research on deformation property of 316LN nuclear main pipe steel at elevated temperature. China Mechanical Engineering, 2012,23(11):1353-1359 Zhao Wenlong，Ma Qingxian.Research on Casting Defects of 30Cr2Ni4MoV Heavy Steel Ingot. Heavy casting and forging, 2013，（5）：35-37 Liu Min, Dong Xiaoliang, Ma Qingxian. Investigation on hollow steel ingot forging process of heavy cylinder forging. Journal of Plasticity Engineering, 2013,20(6):1-8