韩福柱 - 清华大学 - 机械工程系

个人简介

教育背景 1999.04—2002.03 日本东京农工大学机械系统工程博士 1989.07—1992.03 日本山形大学电气电子硕士 1985.09—1989.07 东北电力大学电力系统自动化学士工作履历 2010.12— 清华大学机械工程系教授 2004.03—2010.11 清华大学精密仪器与机械学系副教授 2002.04—2004.03 日本JSPS 博士后 1992.04—1999.03 日本牧野公司研究职员奖励与荣誉 “Simulation of WEDM Using Discharge Location Searching Algorithm”获第十届国际ICPE学会优秀论文奖 “慢走丝电火花线切割高频无电解镜面加工电源及加工设备”获中国机械工业科学技术奖二等奖《微细电火花加工用脉冲电源技术的基础研究》获中国机械工程学会优秀论文奖机械加工质量影响因素综合系列实验的开发与研究获清华大学实验技术成果二等奖基于FPGA的永磁同步电机伺服控制系统设计获第七届中国研究生电子竞赛三等奖（优秀指导教师）

研究领域

特种加工技术与装备，精密与超精密加工技术，增材制造技术与装备，特种数控与机电系统控制技术

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Wang, J.-H., Wang, J., Lu, Y., Du, M.-H., Han, F.-Z., Effects of single pulse energy on the properties of ceramic coating prepared by micro-arc oxidation on Ti alloy, Applied Surface Science, (2015) 324,p405-413. Wang, J., Han, F., Simulation model of debris and bubble movement in electrode jump of electrical discharge machining, International Journal of Advanced Manufacturing Technology, (2014) 74(5-8),p591-598. Wang, J.-H., Du, M.-H., Han, F.-Z., Yang, J., Effects of the ratio of anodic and cathodic currents on the characteristics of micro-arc oxidation ceramic coatings on Al alloys, Applied Surface Science, (2014) 292(5-8),p658-664. Wang, J., Chen, W., Gao, F., Han, F., A new electrode sidewall insulation method in electrochemical drilling, International Journal of Advanced Manufacturing Technology, (2014) 75(1-4),p21-32. Takino, H., Han, F., Cutting of polished single-crystal silicon by wire electrical discharge machining using anti-electrolysis pulse generator, Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014,(2014) 2,p59-62. Wang, J., Han, F., Simulation model of debris and bubble movement in consecutive-pulse discharge of electrical discharge machining, International Journal of Machine Tools and Manufacture, (2014) 77,p56-65. Wang, J., Chen, W., Han, F., Study on the magnetorheological finishing method for the WEDMed pierced die cavity, International Journal of Advanced Manufacturing Technology, (2015) 76(9-12),p1969-1975. Wang, J., Han, F., Zhao, F., Improvement of EDM efficiency with a new adaptive control strategy, International Journal of Advanced Manufacturing Technology ,(2012) 62(9-12),p1025-1040. Wang, J., Han, F.-Z., Lu, J.-M., Zhao, F.-L., Research on influence rules of electrode machining time on EDM efficiency, Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology ,(2012) 52(5),p652-656. Wang, J., Han, F., Cheng, G., Zhao, F., Debris and bubble movements during electrical discharge machining, International Journal of Machine Tools and Manufacture ,(2012) 58,p11-18. F.Han, F.AI, Y.Wang, Attempt at unitary magnetorheological finishing for a pierced die cavity， Proceedings of the Institution of Mechanical Engineers Part B-Journal of Manufacture(2010),224(6) ,p879-886. Han, F., Zhang, J., Cheng, G., Takahito, I., Modeling of work piece removal rate on EDM,16th International Symposium on Electro machining, ISEM 2010,(2010),p 101-104. Zhou, M., Han, F., Tang, B., The methodology of detecting dynamical properties of Electrical Discharge Machining (EDM) process towards building a timely varied linear predictive model,16th International Symposium on Electro machining, ISEM 2010,(2010),p 73-78 Zhou, M., Han, F., Meng, X., Chen, B., Analysis and control of electrical discharge machining (EDM) process, IEEM 2009 - IEEE International Conference on Industrial Engineering and Engineering Management,(2009),p 164-168. F.Han, G.Cheng, F. Zhijing, Measurement of wire electrode temperature in WEDM, International Journal of Advanced Manufacturing Technology ,(2009), 41(9,10),p871-879. M. Zhou, F.Han, W. Yongxain, Assessment of dynamical properties in EDM process-detecting signature of latent change to deleterious process in advance, International Journal of Advanced Manufacturing Technology,(2009), 44(3-4),p283-292. M. Zhou, F.Han, W. Yongxain, Assessment of the dynamical properties in EDM process-detecting deterministic nonlinearity of EDM process, International Journal of Advanced Manufacturing Technology ,(2009),44(1-2),p91-99. M. Zhou, F.Han, Adaptive control for EDM process with a self-tuning regulator, International Journal of Machine Tools and Manufacture,(2009)，49(6),p462-469. Han, F., Wang, Y., Zhou, M., High-speed EDM milling with moving electric arcs, International Journal of Machine Tools and Manufacture,(2009)，49(1),p20-24. F.Han, G. Cheng, thermo-mechanical Analysis and Optimal Tension Control of Micro Wire Electrode, International Journal of Machine Tools and Manufacture, (2008),48(7-8): p922-931. F. Han, P.Grangure,M. Kunieda, Improvement in accuracy in potential method for detecting EDM spark locations, Journal of Materials Processing Tech, (2008), 206(1-3), p328-332. M.Zhou, F.Han, A time-varied predictive model for EDM process, International Journal of Machine Tools and Manufacture, (2008) 48, p 1668-1677. F.Han, L. Chen, D. Yu: Basic study on pulse generator for micro-EDM, International Journal of Advanced Manufacturing Technology,(2007),33 (5-6),p474-479. F.Han, J. Jiang, D. Yu, influence of discharge current on machined surface by thermo-analysis in WEDM, International Journal of Machine Tools and Manufacture ,(2007) ,47 (7-8), p1187-1196. F.Han, J. Jiang, D. Yu, Influence of machining parameters on surface roughness in finish cut of WEDM, International Journal of Advanced Manufacturing Technology ,(2007) ,34 (5-6): p538-546. F.Han, J.Zhang, Corner error cut of rough cutting in wire EDM, Precision Engineering,(2007)31,p331-336. G. Cheng, F.Han, Z. Feng, Experimental determination of convective heat transfer coefficient in WEDM, International Journal of Machine Tools and Manufacture,(2007), 47, (11) , p1744-1751. Lu, B.-H., Han, F.-Z., Cheng, H.-B., Chen, X.-M., Design of curved surface manufacture system with five DOF and its CAM, Guangxue Jishu/Optical Technique(2007),33,p185-189. F.Han, Y.Yamada, Experimental attempts of sub-micrometer order size machining using micro-EDM, Precision Engineering, (2006) 30(2)，p123-131. Han, F., Chen, L., Zhou, X., Study on the transistor type pulse generator for micro-EDM, Zhongguo Jixie Gongcheng/China Mechanical Engineering, (2006) 17(20)，p2094-2097. Han, F., Tao, C., Zhou, X., Masanori, K. , Development of simulation system on WEDM first cut ,Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, (2006) 42(6)，p101-105. Han, F., Cheng, G., Chen, X., Zhou, X., Kunieda, M., CAD/CAM software for manufacturing 3-D curved surfaces using WEDM, Qinghua Daxue Xuebao/Journal of Tsinghua University, (2005) 45(11)，p1472-1475. F.Han, M. Kunieda, Development of Parallel Spark electrical discharge machining, Precision Engineering 28(2004)p65-72. F. Han, S. Wachi, M. Kunieda, Improvement of Machining Characteristics of Micro-EDM Using Transistor Type Isopulse Generator and Servo Control, Precision Engineering, (2004),28,p378-385. F. Han, M. Kunieda, T. Sendai, Y. Imai: High Precision Simulation of WEDM Using Parametric Programming, CIRP (2002) p165-168.