赵小军 - 中南大学 - 材料科学与工程学院

个人简介

教育经历： 2009/10-2010/10 加拿大瑞尔森大学，国家公派联合培养 2008/09-2012/07 东北大学，材料科学与冶金学院，材料学，获工学博士学位 2006/09-2008/07 东北大学，材料科学与冶金学院，材料学，获工学硕士学位 2002/09-2006/07 东北大学，材料科学与冶金学院，材料科学与工程，获工学学士学位工作经历 2013/07-至今讲师，中南大学材料科学与工程学院 2013/10-2016/10 中南大学冶金与环境学院，冶金工程，博士后

研究领域

主要从事新型无机非金属材料和金属陶瓷复合材料的设计、制备、性能与微观机制的研究工作。主要研究方向：陶瓷高温结构材料、难熔金属材料、超高温涂层材料、薄膜与多孔泡沫材料、硬质合金材料等。

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1] Y. F. Song, X. F. Ding, L. R. Xiao, X. J. Zhao*, Z. Y. Cai, Y. W. Li, Z. Z. Zheng, Effects of two-stage aging on the dimensional stability of Al-Cu-Mg alloy. Journal of Alloys and Compounds, 2017, 701: 508-514. [2] L. Guo, L. R. Xiao, X. J. Zhao*, Y. F. Song, Z. Y. Cai, H. J. Wang, C. B. Liu, Preparation of WC/Co composite powders by electroless plating, Ceramics International, 2017, 43(5): 4076-4082.. [3] C. X. Yu, X. J. Zhao, L. R. Xiao, et al. Effect of carbon addition on the microstructure and mechanical properties of Nb-30Ti-18Al alloy, Materials Science and Engineering A, 2016, 666: 199-206. [4] X J Zhao, L Guo, Z Y Cai, et al. SiC and ZrN Nano-Particulate Reinforced AlON Composites: Preparation, Mechanical Properties and Toughening Mechanisms, Ceramics International, 2016, 42 (5): 6072-6079. [5] Y F Song, L R Xiao, X J Zhao, et al. Fabrication, microstructure and shear properties of Al foam sandwich. Materials and Manufacturing Processes, 2016, 31 (8): 1046-1051. [6] Y H Wang, L R Xiao, X J Zhao, et al. Corrosion behavior of Zn-Cu-Ti and Zn-Cu-Ti-Mg alloys in Nacl solution, Materials and Corrosion, 2016, 67 (3): 297-304. [7] Y H Wang, L R Xiao, X J Zhao, et al. Microstructure and mechanical properties of columnar-grained copper during cold-drawing, Materials Science and Engineering A, 2015, 639: 122-130. [8] 胡炜，王彦红，赵小军，肖来荣，饶博，章玮. 热型连铸铝线的制备及组织性能研究. 有色金属学报，2015，25(7): 1882-1889. [9] X J Zhao, L R Xiao, Z W Zhao, L Guo, H Q Ru, N Zhang, D L Chen. Fabrication and mechanical properties of silicon carbide-aluminum oxynitride nanocomposites, Ceramics International, 2014, 40 (9): 14295-14303. [10] 曾德露，肖来荣，赵小军，王彦红. 铬对HAl77-2铝黄铜耐蚀性能的影响. 材料保护，2014，12. [11] 刘峤，肖来荣，张宏领，曾德露，王彦红，赵小军. 稀土La对2024铝合金铸态组织的影响. 矿冶工程，2014, 34 (5): 134-136. [12] X J Zhao, H Q Ru, N Zhang, et.al. Corrosion of aluminum oxynitride based ceramics by molten steel. Ceramics International, 2013, 39 (3): 3049-3054. [13] N Zhang, X J Zhao, H Q Ru, et al. Thermal shock behavior of nano-sized ZrN particulate reinforced AlON composites, Ceramics International, 2013, 39 (1): 367-375. [14] N Zhang, B Liang, X J Zhao, et al. Effect of polyacrylic acid addition on rheology of SiC-Al2O3-ZrO2 (3Y) mixed suspensions, International Journal of Applied Ceramic Technology, 2013, 10 (3): 502-508. [15] X J Zhao, N Zhang, H Q Ru, et al. Mechanical properties and toughening mechanisms of silicon carbide nano-particulate reinforced Alon composites, Materials Science and Engineering A, 2012, 538: 118-124. [16] X J Zhao, H Q Ru, D L Chen, et.al. Thermal shock behavior of nano-sized SiC particulate reinforced AlON composites, Materials Science and Engineering B, 2012, 177 (5): 402-410. [17] N Zhang, X Y Cui, X J Zhao, et al. Preparation of nanometer carbon spheres by hydrothermal synthesis method, Key Engineering Materials, 2012, 512-515: 257-260. [18] X J Zhao, D L Chen, H Q Ru, et.al. Oxidation behaviour of nano-sized SiC particulate reinforced Alon composites, Journal of the European Ceramic Society, 2011, 31 (13): 2255-2265. [19] X J Zhao, D L Chen, H Q Ru, et.al. Zirconium nitride nano-particulate reinforced Alon composites: fabrication, mechanical properties and toughening mechanisms, Journal of the European Ceramic Society, 2011, 31 (5): 883-892. [20] N Zhang, B Liang, X Y Wang, H M Kan, X J Zhao. The pressureless sintering and mechanical properties of AlON ceramic, Materials Science and Engineering A, 2011, 528 (19-20): 6259-6262.