朱明 - 西安科技大学 - 材料科学与工程学院

个人简介

朱明，男，1978年生，博士，副教授，硕士生导师。2006年毕业于中国科学院金属研究所材料科学与工程专业，获工学博士学位。现任西安科技大学材料科学与工程学院副院长。

研究领域

主要从事高温结构材料的高温腐蚀机理及表面防护涂层、材料表面改性和金属基复合材料等方向的研究工作。作为主要研发人员参加了包括国家自然科学基金、国家科技支撑计划项目在内的重点项目的研究和推广工作。

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

1. Ming Zhu, Rui Wang, Chen Chen, Haibin Zhang, and Guojun Zhang, Electrochemical study on the corrosion behaviors of Ti3SiC2 in 3.5%NaCl solution, RSC Advanced, 2017, 7: 12534-12540. 2. M. Zhu, R. Wang, C. Chen, H. B. Zhang, and G. J. Zhang, Comparison of corrosion behavior of Ti3SiC2 and Ti3AlC2 in NaCl solutions with Ti, Ceramics International, 2017, 43: 5708-5714. 3. Ming Zhu, Hongfang Ma, Mingjing Wang, Zhihua Wang and Adel Shairf, Effects of cations on corrosion of Inconel 625 in molten chloride salts, High temperature Materials and Processes, 2014,35: 337-345. 4. Zhu Ming, Ma Hongfang and Wang Zhihua, Effects of Effects of Chlorate on the Hot Corrosion Behaviors of Cr0.82Al0.18N Coating Deposited on a Ti3Al Based Alloy, Rare Metal Materials and Engineering, 2014,43(12): 2953-2957. 5. Zhu Ming and Wang Zhihua, Effect of water vapor on the oxidation behavior of Cr-Al-N coatings, Advanced Materials Research, 2012, 476-478: 2083-2086. 6. Zhu Ming and Li Meishuan, Thermal stability of CrAlN coatings, Advanced Materials Research, 2011, 177: 249-252. 7. M. Zhu, M. Li and Y. Zhou, Short -Term Oxidation and Hot Corrosion Resistance of a Gradient CrN/Cr1-xAlxN coating, Materials and Corrosion, 2010, 61: 939-946. 8. Ming Zhu, Shuwang Duo, Tianpeng Li, Meishuan Li and Yanchun Zhou, Effect of Substrate Bias Voltage on the Microstructure of Cr-Al-N Coatings, Key Engineering Materials, 2008, 373-374: 167-171. 9. Ming Zhu, Meishuan Li and Yanchun Zhou, Effect of CeO2 applied on the preformed oxide scales on the subsequent oxidation of Fe-20Cr alloy at 1000oC, Corrosion Engineering, Science and Technology, 2007,42,73-79. 10. Ming Zhu, Meishuan Li, Shuwang Duo and Yanchun Zhou, Improvment on the oxidation resistance of a Ti3Al based alloy by Cr1-xAlxN (0≤x≤0.47) coatings, Journal of Material Science and Technology, 2007,23, 373-378. 11. Ming Zhu, Meishuan Li Yali Li and Yanchun Zhou, Influence of sol-gel derived Al2O3 film on the oxidation behavior of a Ti3Al based alloy, Material Science and Engineering A, 2006, 415:177-183. 12. Ming Zhu, Meishuan Li and Yanchun Zhou, Oxidation resistance of Cr1-xAlxN (0.18≤x≤0.47) coatings on K38G superalloy at 1000-1100℃ in air, Surface Coatings and Technology, 2006, 201: 2878-2886. 13. J.-T. Yuan, H.-H. Zhang, A.-Q. Fu, C.-X. Yin, M. Zhu, N.-X. Lv, X.-Q. Xu and J. Miao, Insights into the corrosion perforation of UNS S32205 duplex stainless steel weld in gas transportation pipelines, Materials and Corrosion, 2017, DOI: 10.1002/maco.201609341. 14. MA H F, ZHU M, ZHU Q, et al. Corrosion Behaviors of Thermal Diffusion Coating on the Surface of Inconel625 Alloy in Chloride Molten Salts. Materials Science Forum, 2014, 809-810:589-595. 15. Shuwang Duo, Ming Zhu and Meishuan Li, Corrosion Behavior of Cr-Al-N Coatings Deposited by Reactive Magnetron Sputtering, Trans. Nonferrous Met. Soc. China 2007,17:s841-s846. 16. Duo shuwang, Li Meishuan, Zhu Ming, Zhang Yaming and Zhou Yanchun, An investigation of the resistance of Polyimide/silica hybrid films to atomic oxygen attack, Surface and Coatings Technology. 2006, 200: 6671-6677. 17. Shuwang Duo, Meishuan Li, Ming Zhu andYanchun Zhou, Polydimethylsiloxane/silica hybrid coatings protecting Kaptonfrom atomic oxygen attack, Materials Chemistry and Physics, 2008, 112: 1093-1098. 18. Guangming Liu, Meishuan Li, Ming Zhu and Yanchun Zhou,Transient of alumina oxide scale on-NiAl coated on M38G alloy at 950oC,2007, 15, 1285-1290. 19. Lu Jian-hua, Sun Wan-chang, Zhu Ming, Tan Ming-feng and Zhou Quan, Effects of content of Al2O3 particles and heat treatment on corrosion resistance of Ni-P-Al2O3 composite coatings, Advanced Materials Research, 2010, 105-106: 441-443. 20. Quan Zhou, Wanchang Sun, Ming Zhu and Mingfeng Tan, Fabrication and corrosion behavior of electroless Ni-W-P coating on magnesium alloy, Advanced Materials Research, 2009, 79-82: 997-1000.