近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
专著
赵宪忠，闫伸. 《空间结构连续性倒塌机制与设计对策》，中国建筑工业出版社，2018，ISBN 978-7-112-23027-3.
代表性国际期刊论文
Zhao X, Xu Z, Yan S*. (2024). Collapse-resisting mechanism and damage propagation pattern of suspended-domes following sudden cable loss. Journal of Constructional Steel Research, 213, 108338.
Xu Z*, Yan S. (2023). Progressive-collapse mechanism of suspended-dome structures subjected to sudden cable rupture. Buildings, 13, 1533.
Lyu J, Yan S*, He S, Zhao X, Rasmussen K. (2023). Mechanical model for the full range behaviour of bolted T-stubs. Journal of Constructional Steel Research, 200, 107652.
Yan S, Lyu J, Wu A*. (2022). Buckling resistance of steel circular tubes strengthened by welding cover plates. Journal of Constructional Steel Research, 199, 107631.
Zhao X, Lyu J, Yan S*, Chen X, Wu X, Xu X, Gao F. (2022). Performance evaluation of axial-loaded circular steel tubes strengthened by welding under service load. Engineering Structures, 271, 114948.
Wan W, Yan S*, Zhang H, Rasmussen K. (2022). A generalised component method for bolted angle connections. Journal of Constructional Steel Research, 198, 107530.
Zhao X, Wen F, Yan S*. (2022). Behavior of multi-steel reinforced concrete columns with encased steel H-sections. Engineering Structures, 264, 114463.
Liu X, Yan S*, Rasmussen K, Deierlein G. (2022). Experimental investigation of the effect of Lode angle on fracture initiation of steels. Engineering Fracture Mechanics, 271, 108637.
Liu X, Yan S*, Rasmussen K, Deierlein G. (2022). Verification of void growth-based exponential damage function for ductile crack initiation over the full range of stress triaxialities. Engineering Fracture Mechanics, 269, 108571.
Yan S*, Rasmussen K. (2021). Generalised Component Method-based finite element analysis of steel frames. Journal of Constructional Steel Research, 187, 106949.
Zhao X, He S, Yan S*. (2021). Full-range behaviour of T-stubs with various yield line patterns. Journal of Constructional Steel Research, 186, 106919.
Yan S*, Jiang L, Rasmussen K, Zhang H. (2021). Full-range behaviour of top-and-seat angle connections. Journal of Structural Engineering, 147(1), 04020308.
Yan S, Zhao X*, He P. (2020). Ductility and fracture models of G20Mn5 cast steel. Journal of Constructional Steel Research, 175, 106363.
Ren C, Zhang P, Yan S, Dai L*. (2020). Analysis and design of cold-formed steel storage rack uprights under localised fires. Structures, 27, 2082-95
Wang C, Zhang H, Rasmussen K, Reynolds J, Yan S*. (2020). System reliability-based limit state design of support scaffolding systems. Engineering Structures, 216, 110677.
Yan S*, Rasmussen K, Jiang L, Zhu C, Zhang H. (2020). Experimental evaluation of the full-range behaviour of steel beam-to-column connections. Advanced Steel Construction, 16(1), 77-84.
Yan S*, Jiang L, Rasmussen K. (2020). Full-range behaviour of double web angle connections. Journal of Constructional Steel Research, 166, 105907.
Yan S*, Rasmussen K, Liu X, Dai L, Zhao X. (2019). Behaviour of H-section purlin connections in resisting progressive collapse of roofs. Engineering Structures, 201, 109849.
Zhu C, Rasmussen K, Yan S*, Zhang H. (2019). Experimental full-range behaviour assessment of bolted moment end-plate connections. Journal of Structural Engineering, 145(8), 04019079.
Liu W, Zhang H, Rasmussen K, Yan S*. (2019). System-based limit state design criterion for 3D steel frames under wind loads. Journal of Constructional Steel Research, 157, 440-49.
Yan S, Zhao X*, Rasmussen K, Zhang H. (2019). Identification of critical members for progressive collapse analysis of single-layer latticed domes. Engineering Structures, 188, 111-20.
Sena Cardoso F, Zhang H, Rasmussen K, Yan S*. (2019). Reliability calibrations for the design of cold-formed steel portal frames by advanced analysis. Engineering Structures, 182, 164-71.
Zhu C, Rasmussen K, Yan S*. (2019). Generalised Component Model for Structural Steel Joints. Journal of Constructional Steel Research, 153, 330-42.
Liu J, Yan S, Zhao X*. (2018). Simulation of fracture of a tubular X-joint using a shear-modified Gurson-Tvergaard-Needleman model. Thin-Walled Structures, 132, 120-35.
Yan S, Zhao X*, Chen Y, Xu Z, Lu Y. (2018). A new type of truss joint for prevention of progressive collapse. Engineering Structures, 167, 203-13.
Yan S, Zhao X*. (2018). A fracture criterion for fracture simulation of ductile metals based on micro-mechanisms. Theoretical and Applied Fracture Mechanics, 95, 127-42.
Yan S, Zhao X*, Wu A. (2018). Ductile fracture simulation of constructional steels based on yield-to-fracture stress-strain relationship and micro-mechanism based fracture criterion. Journal of Structural Engineering, 144(3), 04018004.
Tong X*, Gao S, Liu S, Ye Z, Chen P, Yan S, Zhao X, Du L, Liu X, Luan K. (2017). Monitoring a progressive collapse test of a spherical lattice shell using high-speed videogrammetry. The Photogrammetric Record, 32(159), 230-54.
Yan S, Zhao X*, Lu Y. (2017). Collapse-resisting mechanisms of planar trusses following sudden member loss. Journal of Structural Engineering, 143(9), 04017114.
Zhao X*, Yan S, Chen Y, Xu Z, Lu Y. (2017). Experimental study on progressive collapse-resistant behavior of planar trusses. Engineering Structures, 135, 104-16.
Zhao X*, Yan S, Chen Y. (2017). Comparison of progressive collapse resistance of single-layer latticed domes under different loadings. Journal of Constructional Steel Research, 129, 204-14.
Zhao X*, Yan S, Xu Z, Wu A. (2015). Research and application of beam string structures. Structural Engineering International - Journal of IABSE, 25(1), 26-33.
代表性国内期刊论文
赵宪忠*，闫伸，陈以一，林颖儒. (2017). 沈阳文化艺术中心单层折板空间网格结构整体模型试验研究. 建筑结构学报，38(1)，42-51.
赵宪忠*，闫伸，陈以一. (2016). 空间网格结构连续性倒塌试验研究. 建筑结构学报，37(6)，1-8.
赵宪忠*，闫伸，陈以一. (2013). 大跨度空间结构连续性倒塌研究方法与现状. 建筑结构学报，34(4), 1-14.
赵宪忠，徐祥斌*，闫伸，王彬，陈以一，范重，彭翼，李丽. 空间复杂钢管节点试验研究. 工程力学，27(S2)，207-11.
京公网安备 11010802027423号