近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Y Long, Z Zhang, K Fu, Y Li. (2021). Efficient plant fibre yarn pre-treatment for 3D printed continuous flax fibre/poly(lactic) acid composites. Composites Part B: Engineering. 227, 109389.
B Yang, H Wang, Y Chen, K Fu, Y Li. (2021). Experimental evaluation and modelling of drilling responses in CFRP/honeycomb composite sandwich panels. Thin-walled Structures. 169, 108279.
Y Chen, L Ye, YX Zhang, K Fu. (2021). Compression behaviours of 3D-printed CF/PA metamaterials: Experiment and modelling. International Journal of Mechanical Sciences. 206, 106634.
W Hu, B Yang, J Tan, K Fu, Y Yuan, Y Cang, Y Li. (2021). The novel methods to enhance the SMA/PLA interfacial strength and in-situ heal the interfacial damage. Composites Communications. 27, 100863.
Z Zhang, K Fu, Y Li. (2021). Improved interlaminar fracture toughness of carbon fiber/epoxy composites with a multiscale cellulose fiber interlayer. Composites Communications. 100898.
Y Chen, L Ye, K Fu. (2021). Progressive failure of CFRP tubes reinforced with composite sandwich panels: Numerical analysis and energy absorption. Composites Structures. 263, 113674.
B Yang, K Fu, J. Lee, Y Li. (2021). Artificial neural network (ANN)-based residual strength prediction of carbon fibre reinforced composites (CFRCs) after impact. Applied Composite Materials. 28, 809-833.
H. Zhu, K. Fu, B. Yang, Y. Li. (2021). Nickel-coated nylon sandwich film for combination of lightning strike protection and electromagnetic interference shielding of CFRP composite. Composites Science and Technology. 207, 108675.
B Yang, K Fu, Y Li. (2021). Modelling damage evolution and CAI strength of composite laminates under biaxial compression. Journal of Composite Materials, 0021998321998426.
J. Chen, K. Fu, Y. Li. (2021). Understanding processing parameter effects for carbon fibre reinforced thermoplastic composites manufactured by laser-assisted automated fibre placement (AFP). Composites Part A. 140, 106160.
J. Cheng, L. Ye, K. Fu, H. Wang. (2021). Effect of striker shape on impact energy absorption of a shear thickening fluid. Composites Communications. 100560.
S. Zhou, Y. Li, K. Fu, X. Wu. (2021). Progressive fatigue damage modelling of fibre-reinforced composite based on fatigue master curves. Thin-walled Structures. 158, 107173.
B. Yang, K. Fu, Y. Li. (2021). A method to estimate dynamic buckling response of an unstiffened plate elastically restrained along all edges under in-plane impact. International Journal of Structural Stability and Dynamics. 21, 2150021
B. Yang, Y. Chen, J. Lee, K. Fu, Y. Li. (2021). In-plane compression response of woven CFRP composite after low-velocity impact: Modelling and experiment. Thin-Walled Structures. 158, 107186.
H. Zhou, L Chang, K. Fu, H. Huang, R. Niu, X. Liao, L. Sheppard, L. George, L. Martinu. (2020). Improvement of flow strength and scratch resistance of Ti/Cu nanocrystalline metal multilayer thin films by tailoring layer thickness and modulation ratio. Surface & Coatings Technology. 404, 126461.
K. Fu, H. Wang, Y.X. Zhang, L. Ye, J.P. Escobedo, P.J. Hazell, K. Friedrich, S. Dai. (2020). Rheological and energy absorption characteristics of a concentrated shear thickening fluid at various temperatures. International Journal of Impact Engineering. 139, 103525.
Y. Chen, X. Cheng, K. Fu, L. Ye. (2020). Failure characteristics and multi-objective optimisation of CF/EP composite sandwich panels under edgewise crushing. International Journal of Mechanical Sciences, 183, 105829.
B. Yang, Y. Li, K. Fu. (2020). In-plane impact-induced elastic buckling behaviour of rectangular transversally isotropic stiffened plates with all edges elastically restrained against rotation. International Journal of Mechanical Sciences, 174, 105478.
Q. He, H. Wang, K. Fu, L. Ye. (2020). 3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance. Composites Science and Technology, 191, 108077.
Z. Zhang, Y. Li, K. Fu, Q. Li. (2020). Determination of interfacial properties of cellulose nanocrystal-modified sisal fibre in epoxy by cyclic single-fibre pull-out. Composites Science and Technology, 193, 108142.
Y. Li, J. Zhong, K. Fu. (2020). Low-velocity impact and compression-after-impact behaviour of flax fibre-reinforced composites. Acta Mechanica Solida Sinica, 1-18.
Y. Chen, X. Cheng, K. Fu. (2020). Multi-material design of a vehicle body considering crashworthiness safety and social effects. International Journal of Crashworthiness. 25, 517-526.
K. Fu, L. Ye. (2019). Modelling of lightning-induced dynamic response and mechanical damage in CFRP composite laminates with protection. Composite Structures. 218, 162-173.
M. Khorsand, K. Fu, Y. Tang. (2019). Multi-directional functionally graded materials for enhancing the durability of shell structures. International Journal of Pressure Vessels and Piping. 175, 103926.
Y. Chen, L. Ye, J.P. Escobedo-Diaz, Y.X. Zhang, K. Fu. (2019). Quasi-static and dynamic progressive crushing of CF/EP composite sandwich panels under in-plane localised compressive loads. Composite Structures. 222, 110839.
X. Cheng, J. Fei, A. Kondyurin, K. Fu, L. Ye, M.M. Bilek, S. Bao. (2019). Enhanced biocompatibility of polyurethane-type shape memory polymers modified by plasma immersion ion implantation treatment and collagen coating: an in vivo study. Materials Science & Engineering C. 99, 863-874.
Y. Luo, Y. Zhang, M. Xu, K. Fu, L. Ye, S. Xie, X. Zhang. (2019). Improved vibration attenuation performance of large hoop truss structures via a hybrid control algorithm. Smart Materials and Structures.28, 065007.
H. Zhou, H. Liu, K. Fu, H. Yuan, X. Du, Y.W. Mai. (2019). Numerical simulation of failure of composite coatings due to thermal and hygroscopic stresses. Coatings. 9, 243.
K. Fu, H. Wang, L. Chang, M. Foley, K. Friedrich, L. Ye. (2018). Low-velocity impact behaviour of a shear thickening fluid (STF) and STF-filled sandwich composite panels. Composites Science and Technology. 165, 74-83.
K. Fu, H. Wang, S. Wang, L. Chang, L. Shen, L. Ye. (2018). Compressive behaviour of shear thickening fluids with concentrated polymers at high strain rates. Materials & Design. 140, 295-306.
K. Fu, L. Sheppard, L. Chang, X. An, C. Yang, L. Ye. (2018). Comparative study on plasticity and fracture behaviour of Ti/Al multilayers. Tribology International. 126, 344-351.
K. Fu, L. Sheppard, L. Chang, X. An, C. Yang, L. Ye. (2018). Length-scale-dependent nanoindentation creep behaviour of Ti/Al multilayers by magnetron sputtering. Materials Characterization. 139, 159-170.
K. Fu, X. Cui, Y. Zhang, L. Ye, L. Chang, K. Friedrich. (2018). Confined compression behaviour of a shear thickening fluid with concentrated submicron particles. Composites Communications. 10, 186-189.
Q. Jia, Q. Yang, X. He, K. Fu. (2018). Micro-mechanism of interfacial separation and slippage of graphene/aluminum nanolaminated composites. Nanomaterials. 8, 1046.
K. Zhang, W. Tang, K. Fu. (2018). Modeling of dynamic behavior of CFRP composite under X-ray radiation. Materials. 11, 143.
Y. Chen, L. Ye, K. Fu, X. Han. (2018). Transition from buckling to progressive failure during quasi-static in-plane crushing of CF/EP composite sandwich panels. Composites Science and Technology. 168, 133-144.
Y. Chen, K. Fu, S. Hou, X. Han, L. Ye. (2018). Multi-objective optimization for designing a composite sandwich structure under normal and 45° impact loadings. Composites Part B: Engineering. 142, 159-170.
Y. Luo, X. Zhang, Y. Zhang, Y. Qu, M. Xu, K. Fu, L. Ye. (2018). Active vibration control of a hoop truss structure with piezoelectric bending actuators based on a fuzzy logic algorithm. Smart Materials and Structures. 27, 085030.
K. Fu, L. Ye, L. Chang, C. Yang, Z. Zhong. (2017). Modelling of lightning strike damage to CFRP composites with an advanced protection system. Part I: thermal–electrical transition. Composite Structures. 165, 83-90.
K. Fu, X. An, L. Chang, C. Yang, L. Sheppard, H. Wang, L. Ye. (2017). Ultra-high specific strength and deformation behavior of nanostructured Ti/Al multilayers. Journal of Physics D: Applied Physics. 50, 365302.
K. Fu, L. Chang, L. Ye, Y. Yin. (2017). Thickness-dependent fracture behaviour of brittle films on a ductile substrate under nanoindentation. Vacuum. 144, 107-115.
K. Fu, L. Chang, C. Yang, L. Sheppard, H. Wang, M. Maandal, L. Ye. (2017). Plastic behaviour of high-strength lightweight Al/Ti multilayered films. Journal of Materials Science. 52, 13956-13965.
R. Wu, K. Fu, T. Chen. (2017). An investigation of interface transferring mechanism of surface-bonded fiber Bragg grating sensors. Review of Scientific Instruments. 88, 085001.
Y. Chen, S. Hou, K. Fu, X. Han, L. Ye. (2017). Low-velocity impact response of composite sandwich structures: modelling and experiment. Composite Structures. 168, 322-334.
L. Chang, G. Zhang, H. Wang, K. Fu. (2017). Comparative study on the wear behavior of two high temperature resistant polymers. Tribology Letters. 65, 34.
K. Fu, L. Chang, L. Ye, Y. Yin. (2016). Indentation stress-based models to predict fracture properties of brittle thin film on a ductile substrate. Surface & Coatings Technology. 296, 46-57.
K. Fu, L. Chang, B. Zheng, Y. Tang, H. Wang. (2015). On determination of representative stress-strain relation of metallic materials using instrumented indentation. Materials & Design. 65, 989-994.
K. Fu, L. Chang, B. Zheng, Y. Tang, Y. Yin. (2015). Analysis on cracking in hard thin films on a soft substrate under Berkovich indentation. Vacuum. 112, 29-32.
F. Xu, W. Guo, K. Fu, X. Wang. (2015). Toughening mechanism of nano-rubber particles in epoxy resin under different strain rates. Acta Polymerica Sinica, 9, 1092-1098.
K. Fu, Y. Chang, Y. Tang, B. Zheng. (2014). Effect of loading rate on the creep behaviour of epoxy resin insulators by nanoindentation. Journal of Materials Science:Materials in Electronics, 25, 3552-3558.
K. Fu, L. Chang, Y. Yin, L. Ye, B. Zheng. (2014). A method for defining initial stress in progressively deposited film on a substrate. International Journal of Modern Physics B, 28, 1450056.
A. Qiu, K. Fu, W. Lin, C. Zhao, Y. Tang. (2014). Modelling low-speed drop-weight impact on composite laminates. Materials & Design, 60, 520-531.
R. Wu, B. Zheng, K. Fu, P. He, Y. Tan. (2014). Study on strain transfer of embedded fiber Bragg grating sensors. Optical Engineering. 53, 085105.
D. Shou, L. Ye, J. Fan, K. Fu, M. Mei, H. Wang, Q. Chen. (2014). Geometry-induced asymmetric capillary flow. Langmuir, 30, 5448-5454.
D. Shou, L. Ye, J. Fan, K. Fu. (2014). Optimal design of porous structures for the fastest liquid absorption. Langmuir, 30, 149-155.
K. Fu, Y. Yin, L. Chang, D. Shou, B. Zheng, L. Ye. (2013). Analysis on multiple ring-like cracks in thin amorphous carbon film on soft substrate under nanoindentation. Journal of Physics D: Applied Physics, 46, 505314.
京公网安备 11010802027423号