个人简介
魏先顺，工学博士，副教授，博士生导师，上海市浦江人才。2011年博士毕业于哈尔滨工业大学材料加工工程专业，2012至2014年在澳大利亚墨尔本大学从事博士后研究工作，2015年进入同济大学材料学院工作至今。先后主持与参与国家自然科学基金项目5项，国家重点研发计划3项，上海市项目2项，在国内外杂志发表SCI论文40余篇，申请和授权发明专利12项。
主持或参与的项目
国家重点研发计划，燃料电池发动机高低温环境适应性研究，参与
国家自然科学基金面上项目，极端冰雪条件下高寒动车组制动盘异常磨损的诱发机理与主动预防，参与
国家自然科学基金青年项目，空气-燃料超音速火焰喷涂Fe基非晶合金粒子沉积行为研究，主持
上海市浦江人才计划，亚稳相在过饱和Ti-Mg固溶体组织演变中的作用机理研究，主持
中央高校基本科研业务费学科交叉类（面上）项目，高寒动车组跨区域运行冰雪导致制动盘异常磨损的诱发机理与主动预防，参与
国家杰出青年科学基金，大块非晶合金特种粉末冶金制备过程基础科学问题研究，参与
国家自然科学基金面上项目， Co元素合金化对Fe基非晶合金玻璃形成能力的作用机理，参与
近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Superhydrophobic Fe-based amorphous alloy coatings with excellent anti-fouling and anti-corrosion properties by picosecond laser texturing
A review on coatings deposited by extreme high-speed laser cladding: processes, materials, and properties
Investigation on pitting corrosion mechanism of the Fe-based amorphous alloy coating by three-dimensional X-ray imaging at micro-scale
The mechanism of nano-network structure formed by friction-induced pozzolanic silicate
Surface Post-Treatment Induced by Nanosecond Pulsed Laser Processing of HVAF-Sprayed Fe-Based Metallic Glass Coating
Corrosion Mechanism and Damage Characteristic of Q235B Steel Under the Effect of Stray Current in NS4 Simulated Soil Solution
Influence of working pressure on the structure and magnetic properties of polycrystalline iron films
Study of the nano-network structure in the friction transfer film of the hybrid reinforced aluminum-based composite
Investigations of the effects of combination treatments on the fretting fatigue resistance of GH4169 superalloy at an elevated temperature
FeCrMoWCBY metallic glass with high corrosion resistance in molten lead–bismuth eutectic alloy
Effects of Annealing Below Glass Transition Temperature on the Wettability and Corrosion Performance of Fe-based Amorphous Coatings
High Bending Strength Hypereutectic Al-22Si-0.2Fe-0.1Cu-Re Alloy Fabricated by Selective Laser Melting
Effects of yttrium addition on thermoplastic formability of Zr-Cu-Ni-Al amorphous alloy under non-isothermal condition
Effect of the Sputtering Power on the Structure, Morphology and Magnetic Properties of Fe Films
Numerical Simulation of Moving Heat Flux during Selective Laser Melting of AlSi25 Alloy Powder
Ceramic waste SiC particle-reinforced Al matrix composite brake materials with a high friction coefficient
Thermodynamic and kinetic studies of the Cu–Zr–Al(–Sn) bulk metallic glass-forming system
Characterization and elevated-temperature tribological performance of AC–HVAF-sprayed Fe-based amorphous coating
Fabrication, Corrosion, and Mechanical Properties of Magnetron Sputtered Cu–Zr–Al Metallic Glass Thin Film
Effect of Deposition Parameters on Microstructure of the Ti-Mg Immiscible Alloy Thin Film Deposited by Multi-Arc Ion Plating
Equilibrium viscosity and structural change in the Cu47.5Zr45.1Al7.4 bulk glass-forming liquid
Design of Cu-Zr-Al and Cu-Zr-Al-Sn bulk amorphous alloys with high glass-forming ability
Numerical Investigation of In-Flight Behavior of Fe-Based Amorphous Alloy Particles in AC-HVAF Thermal Spray Process
Sliding tribocorrosion behavior of Fe-based bulk metallic glass under corrosive environments
Parameter optimization for tungsten carbide/Ni-based composite coating deposited by plasma transferred arc hardfacing
Effects of W Addition on the Electrochemical Behaviour and Passive Film Properties of Fe-Based Amorphous Alloys in Acetic Acid Solution
Electrochemical behaviors and passive film properties of Fe-based bulk metallic glass in Cl ? -containing acetic acid solutions under high temperature
Effect of W addition on the glass forming ability and mechanical properties of Fe-based metallic glass
Influence of sealing treatment on the corrosion resistance of Fe-based amorphous coatings in HCl solution
Investigating the Wear Behavior of Fe-Based Amorphous Coatings under Nanoscratch Tests
Formation of nanocrystalline β structure in metastable beta Ti alloy during high pressure torsion: The role played by stress induced martensitic transformation
Effects of severe plastic deformation on grain refinement and martensitic transformation in a metastable ? Ti alloy
Metastable orthorhombic phases at ambient pressure in mechanically milled pure Ti and Ti–Mg
Mechanical and functional properties of ultrafine grained Al wires reinforced by nano-Al2O3 particles
Microstructure and mechanical properties of Al–Ni–Ce amorphous matrix composites enhanced with Ti-based glassy particles prepared by powder metallurgy
Nanostructured multi-phase titanium-based particulate composites consolidated by Severe plastic deformation
Diamond reinforced Al-based bulk metallic glassy composites with improved plasticity fabricated by cold hydro-mechanical pressing
Close correlation between transport properties and glass-forming ability of an FeCoCrMoCBY alloy system
High cold plastic deformation of die steel 4Kh5VF1S subjected to hardening and tempering
Bulk amorphous Al 85 Ni 10 Ce 5 composite fabricated by cold hydro- mechanical pressing of partially amorphous powders
Full density consolidation of pure aluminium powders by cold hydro-mechanical pressing
Mechanical property of a new zr-based bulk metallic glass with certain plasticity at low temperature
Effect of Gd addition on the glass forming ability and mechanical properties in a Zr-based bulk amorphous alloy
Zr–Cu–Ni–Al bulk metallic glasses with superhigh glass-forming ability
Atomic-scale bonding of bulk metallic glass to crystalline aluminum
京公网安备 11010802027423号