冯艾寒 - 同济大学 - 材料科学与工程学院

个人简介

工作经历 2013.06-至今：同济大学副教授/博导 2010.05-2013.06：哈尔滨工业大学副教授/硕导 2008.05-2010.05：加拿大瑞尔森大学博士后 2005.08-2008.05：中国科学院金属研究所博士后学习经历 2001.03-2005.07：哈尔滨工业大学材料科学与工程学院材料学博士 1999.09-2001.03：哈尔滨工业大学材料科学与工程学院材料学硕士 1993.07-1997.09：哈尔滨工业大学材料科学与工程学院材料学学士

研究领域

Ti2AlNb基合金微观组织调制及精密热成形(等温锻造、包覆轧制)研究同步辐射、中子衍射、原位透射电镜等技术在Ti2AlNb、TiAl基合金等材料相变过程中的应用研究增材制造钛基合金、高熵合金微观组织演变与塑性变形机理搅拌摩擦焊接铝合金、镁合金、铝基复合材料、钛合金及Ti2AlNb基合金微观组织与疲劳性能研究

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

X.R. Guan, Q. Chen, S.J. Qu*, G.J. Cao, H. Wang*, A.H. Feng, D.L. Chen*. Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning and grain refinement. J. Mater. Sci. Technol. 150 (2023) 104-113. W.F. Lu, A.H. Feng*, J. Shen*. Exploration of the icosahedral clusters in Ni-Nb binary metallic glasses via first-principles theory. Journal of Non-Crystalline Solids. 575 (2022) 121232. H.R. Jiang, J. Tseng, N. Neuber, J. Barrirero, B. Adam, M. Frey, A.C. Dippel, S. Banerjee, I. Gallino, A.H. Feng*, G. Wang, F. Mucklich, R. Busch, J. Shen*. Acta Materialia 226 (2022) 117668. H.R. Jiang, J.Y. Hu, N. Neuber, B. Bochtler, B. Adam, S.S. Riegler, M. Frey, L. Ruschel, W.F. Lu, A.H. Feng*, R. Busch, J. Shen*. Acta Materialia. 212 (2021) 116923. J.Chen#, Q. Chen#, S.J. Qu*, H.P. Xiang, C. Wang, J.B. Gao, A.H. Feng, D.L. Chen*. Oxidation mechanisms of an intermetallic alloy at high temperatures. Scripta Materialia. 199 (2021) 113852. Y.L. Zhang, Z. Chen, S.J. Qu*, A.H. Feng, G.B. Mi, J. Shen, X. Huang, D.L. Chen*. Multiple a sub-variants and anisotropic mechanical properties of an additively-manufactured Ti-6Al-4V alloy, J. Mater. Sci. Technol. 70 (2021) 113-124. B.Y. Hu, H. Zhang, L.Y. Liu, D.B. Liu, A.H. Feng*, D.L. Chen*. Effect of microstructure evolution on corrosion behavior of friction stir welded joint for 2195-T8 alloy. Corrosion 76(12) (2020) 1099-1108. Y.L. Zhang, S.J. Qu, A.H. Feng*, D.L. Chen*. Tensile behavior of a titanium alloy additively manufactured via selective electron beam melting. Proceedings of the third international conference on theoretical, applied and experimental mechanics. ICTAEM 2020, STIN 16 (2020) 14-19. Y.L. Zhang, Z. Chen, S.J. Qu*, A.H. Feng, G.B. Mi, J. Shen, X. Huang, D.L. Chen*. Microstructure and cyclic deformation behavior of a 3D-printed Ti-6Al-4V alloy. J. Alloys Compd. 825 (2020) 153971. Y.L. Zhang, A.H. Feng*, S.J. Qu, J. Shen, D.L. Chen*. Microstructure and low cycle fatigue of a Ti2AlNb-based lightweight alloy. J. Mater. Sci. Technol. 44, (2020) 140-147. Z.G. Zhang, S.J. Qu*, G.R. Cui*, A.H. Feng, J. Shen, D.L. Chen*. A new mechanism of dynamic phase transformations in an isothermal forged beta-gamma intermetallic alloy. Materials. 12(17) (2019) 2787. G.D. Wu, G.R. Cui, S.J. Qu*, A.H. Feng, G.J. Cao, B.H. Ge, H.P. Xiang, J. Shen, D.L. Chen*. High-temperature oxidation mechanisms of nano-/submicro-scale lamellar structures in an intermetallic alloy. Scripta Materialia. 171 (2019) 102-107. Y.X. Chen, J.C. Wang, Y.K. Gao*, A.H. Feng. Effect of shot peening on fatigue performance of Ti2AlNb intermetallic alloy. International Journal of Fatigue. 127 (2019) 53-57. C.K. Yan, G.R. Cui*, S.J. Qu, A.H. Feng, J. Shen, D.L. Chen. Static recrystallization of pure titanium after cryo-deformation. Journal of Physics: Conference Series. IOP pubishing, 1270 (2019) 012040. K. Zhu, S.J. Qu, A.H. Feng*, J.L. Sun, J. Shen. Microstructural evolution and refinement mechanism of a beta-gamma TiAl-based alloy during multidirectional isothermal forging. Materials. 12 (2019) 2496. Y.J. Wu, A.H. Feng*, S.J. Qu, X. Hu, J. Shen. Macro-microscopic field evolution of Ti6Al4V alloy during isothermal upsetting based on deform platform. Materials Research Express. 6 (2019) 056505. Z.X. Zhang, S.J. Qu*, A.H. Feng, X. Hu, J. Shen. Microstructural mechanisms during multidirectional isothermal forging of as-cast Ti-6Al-4V alloy with an initial lamellar microstructure. J. Alloys Compd. 713 (2019) 277-287. 朱凯，冯艾寒，曲寿江，沈军，铸态Ti-44Al-4Nb-(Mo,Cr,B)合金的热变形行为及热加工图，有色金属工程，9(9) (2019) 34-39. 闫辰侃，曲寿江，冯艾寒，沈军，钛及钛合金形变孪晶的研究进展，稀有金属，43(5) (2019) 449-460. (Cover page of the journal issue) 张胜雷，陈卓，曲寿江，冯艾寒，陆煦，沈军，陈道伦，热处理对电子束选区熔化制备的Ti-6Al-4V合金组织与力学性能的影响，热加工工艺，47(10) (2018) 226-231. S.J. Qu, A.H. Feng*, M.R. Shagiev, H. Xie, B.B. Li, J. Shen. Superplastic behavior of the fine-grained Ti-21Al-18Nb-1Mo-2V-0.3Si intermetallic alloy. Letters on Materilals. 8 (4s), (2018) 567-571. J.M. Xiang, G.B. Mi, S.J. Qu*, X. Huang, Z. Chen, A.H. Feng, J. Shen, D.L. Chen**. Thermodynamic and microstructural study of Ti2AlNb oxides at 800oC. Scientific Reports. 8 (2018) 1276. Z.Y. Ma*, A.H. Feng**, D.L. Chen, J. Shen. Recent advances in friction stir welding/processing of aluminum alloys: microstructural evolution and mechanical properties. Critical Reviews in Solid State and Materials Sciences. 43(4) (2018) 269-333. (Highly cited paper as of 2019.10 (Essential Science Indicators)) K. Zhu, S.J. Qu, A.H. Feng, J.L. Sun, J. Shen*. Evolution of the microstructure and lamellar orientation of a beta-solidifying gamma-TiAl-based alloy during hot compression. Metals. 8 (2018) 445. C.K. Yan, A.H. Feng*, S.J. Qu, J.L. Sun, J. Shen. Hot deformation and grain refinement mechanisms of commercially pure titanium processed via three-directional cryo-compression. Mater. Sci. Eng. A 731 (2018) 266-277. C.K. Yan, A.H. Feng*, S.J. Qu, G.J. Cao, J.L. Sun, J. Shen, D.L. Chen**. Dynamic recrystallization of titanium: Effect of pre-activated twinning at cryogenic temperature. Acta Mater. 154 (2018) 311-324. Z.X. Zhang, S.J. Qu, A.H. Feng, X. Hu, J. Shen*. The low strain rate response of as-cast Ti-6Al-4V alloy with an initial coarse lamellar structure. Metals. 8 (2018) 270-1-13. S.J. Qu*, S.Q. Tang, A.H. Feng, C. Feng, J. Shen, D.L. Chen**. Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy. Acta Mater. 148 (2018) 300-310. S.Q. Tang, S.J. Qu, A.H. Feng, C. Feng, J. Shen*, D.L. Chen**. Core-multishell globular oxidation in a new TiAlNbCr alloy at high temperatures. Scientific Reports. 7 (2017) 3483. Z.X. Zhang, S.J. Qu*, A.H. Feng, J. Shen, D.L. Chen*. Hot deformation behavior of Ti-6Al-4V alloy: Effect of initial microstructure. J. Alloys Compd. 718 (2017) 170-181. Z.X. Zhang, S.J. Qu*, A.H. Feng, J. Shen. Achieving grain refinement and enhanced mechanical properties in Ti-6Al-4V alloy produced by multidirectional isothermal forging. Mater. Sci. Eng. A 692 (2017) 127-138. A.H. Feng, D.L. Chen, Z.Y. Ma, W.Y. Ma, R.J. Song. Microstructure and strain hardening of a friction stir welded high-strength Al-Zn-Mg alloy. Acta Metall. Sin (Engl. Lett.) 27(4) (2014) 723-729. 沈军*，冯艾寒. Ti2AlNb基合金微观组织调制及热成形研究进展，金属学报，49(11) (2013) 1286-1294. M. Jafarzadegan, A.A. Zadeh, A.H. Feng, T. Saeid, J. Shen, H. Assadi. Microstructure and mechanical properties of a dissimilar friction stir weld between austenitic stainless steel and low carbon steel. J. Mater. Sci. Technol. 29(4) (2013) 367-372. P. Lin, A.H. Feng, S.J. Yuan*, G.P. Li, J. Shen. Microstructure and texture evolution of a near-a titanium alloy during hot deformation. Mater. Sci. Eng. A 563 (2013) 16-20. Q. Yang, A.H. Feng, B.L. Xiao, Z.Y. Ma*, Influence of texture on superplastic behavior of friction stir processed ZK60 magnesium alloy. Mater. Sci. Eng. A 556 (2012) 671-677. M. Jafarzadegan, A.H. Feng, A.A. Zadeh, T. Saeid, J. Shen, H. Assadi. Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel. Mater. Characterization 74 (2012) 28-41. X.J. Gu, C. Li, A.H. Feng, D.L. Chen. Application of flat-clad optical fiber bragg grating sensor in characterization of asymmetric fatigue deformation of extruded magnesium alloy. IEEE Sensors Journal. 11 (2011) 3042-3046. A.H. Feng, D.L. Chen*, Z.Y. Ma. Microstructure and cyclic deformation behavior of a friction-stir-welded 7075 Al alloy. Metall. Mater. Trans. A. 41A (2010) 957-971. A.H. Feng, D.L. Chen*, Z.Y. Ma. Microstructure and low-cycle fatigue of a friction-stir-welded 6061 aluminum alloy. Metall. Mater. Trans. A. 41A (2010) 2626-2641. A.H. Feng, D.L. Chen, C. Li, X.J. Gu. Flat-cladding fiber bragg grating sensors for large strain amplitude fatigue tests. Sensors 10 (2010) 7674-7680. C. Li, A.H. Feng, X.J. Gu, D.L. Chen. Localized cyclic strain measurements of friction stir welded aluminum alloy using a flat-clad optical fiber sensor array. IEEE Sensors Journal 10 (2010) 888-892. A.H. Feng, Z.Y. Ma*. Microstructure evolution of cast Mg-Al-Zn during friction stir processing and subsequent aging. Acta Materialia 57 (2009) 4248-4260. A.H. Feng, B.L. Xiao, Z.Y. Ma*, R.S. Chen. Effect of friction stir processing procedures on microstructure and mechanical properties of Mg-Al-Zn casting. Metall. Mater. Trans. A. 40A (2009) 2447-2456. D.R. Ni, D. Wang, A.H. Feng, G. Yao, Z.Y. Ma*. Enhanced the high-cycle-fatigue strength of Mg-9Al-1Zn casting by friction stir processing. Scripta Mater. 61 (2009) 568-571. A.H. Feng, B.L. Xiao, Z.Y. Ma*. Effect of microstructural evolution on mechanical properties of friction stir welded AA2009/SiCp composite. Compos. Sci. Technol. 68 (2008) 2141-2148. A.H. Feng, B.L. Xiao, Z.Y. Ma*. Grain boundary misorientation and texture development in friction stir welded SiCp/Al-Cu-Mg composite. Mater. Sci. Eng. A 497 (2008) 515-518. A.H. Feng, Z.Y. Ma*. Enhanced mechanical properties of Mg-Al-Zn cast alloy via friction stir processing. Scripta Mater. 56 (2007) 397-400. (Scripta Materialia Top Cited Article 2007-2011: 中国百篇最具国际影响力文章) A.H. Feng, Z.Y. Ma*. Formation of Cu2FeAl7 phase in friction-stir-welded SiCp/Al-Cu-Mg composite. Scripta Mater. 57 (2007) 1113-1116. S.J. Qu*, A.H. Feng, L. Geng, Z.Y. Ma, J.C. Han. DSC analysis of liquid volume fraction and compressive behavior of the semi-solid Si3N4w/Al-Si composite. Scripta Mater. 56 (2007) 951-954.