杨立军 - 哈尔滨工业大学

个人简介

工作经历 2013年—至今哈尔滨工业大学/机电工程学院博导 2017年—至今哈尔滨工业大学/机电工程学院教授 2010年—2017年哈尔滨工业大学/机电工程学院副教授 2007年—2009年科技部高技术研究发展中心项目主管 2006年—2010年哈尔滨工业大学/机电工程学院讲师 1995年—2000年辽宁工业大学/总务处助工教育经历 2008年—2010年哈尔滨工业大学材料科学与技术博士后流动站，博士后 2002年—2007年哈尔滨工业大学机电工程学院，博士学位 2000年—2002年哈尔滨工业大学机电工程学院，硕士学位 1991年—1995年辽宁工业大学机械工程学院，学士学位

研究领域

面向航空、航天、新能源等领域需求，重点针对难加工材料的激光作用机理、精细结构的表面创成机制及性能表征、超快激光微纳制造技术及应用等方面开展研究工作。主要研究方向如下： 1. 激光复合制造技术与工艺装备（1）激光复合机械切削加工技术（国家重点研发计划项目、基础科研、国家自然科学基金项目）开展激光与作业工具耦合能场调控、数控系统编程、多轴协调轨迹规划、激光复合车铣加工工艺与装备、激光复合超声磨抛工艺与装备的研究工作（2）激光复合射流蚀除加工技术（国家重点研发计划项目、国家科技重大专项项目、共用技术项目、863计划重点项目）开展激光与射流耦合机理、精细结构表面创成及质量评价、激光与水射流耦合蚀除工艺装备、管电极耦合激光复合电解加工工艺与装备的研究工作（3）激光光诱微区纳米制造技术（国家重点研发计划项目、国家自然科学基金项目）开展激光与微纳作业工具耦合的光诱微区解析与调控、结合自下而上和自上而下的纳米制造工艺与装备的研究工作 2. 激光微纳制造技术与工艺装备（1）超快激光微纳结构制备技术与工艺装备（国家重点研发计划项目、国家自然科学基金项目、广东省重点研发计划项目）开展超快激光时空调控、多材料表面超快激光微纳结构创成及性能表征、新材料表面超快激光改性及应用等的研究工作（2）超快激光增减材协同制备技术（国家自然科学基金项目、SAST基金）开展二维材料的涂层结构创成机理、超快激光作用动力学、能源电池制备及表面完整性评价等的研究工作 3. 激光清洗技术与工艺装备（国家重点研发计划项目、广东省重点研发计划项目）开展激光与表面污物作用机理、污物图像识别与定位、激光高效除漆、除锈、除微生物工艺与装备的研究工作 4.光诱应力制造技术与工艺装备（1）光诱应力柔性成形技术（国家科技重大专项、自然科学基金项目）开展轻量化交叉筋壁板激光诱导应力柔性成形策略、工艺与装备的研究工作（2）光诱应力热裂切割技术（国家863计划项目、国家自然科学基金项目）开展硬脆材料激光诱导应力裂纹扩展机理、数控轨迹规划、高效无材料去除加工工艺与装备的研究工作

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Guan Y, Ding Y, Fang Y, Yang LJ，et.al. Femtosecond Laser‐Driven Phase Engineering of WS2 for Nano‐Periodic Phase Patterning and Sub‐ppm Ammonia Gas Sensing[J]. Small, 2303654. Genwang Wang; Yanchao Guan; Yang Wang; Ye Ding; Lijun Yang. Direct Laser Irradiation and Modification of 2D Te for Development of Volatile Memristor. Materials, 2023, 16(2) Yanan Liu; Ye Ding; Jichang Xie; Liangliang Xu; In Wha Jeong; Lijun Yang. One-Step Femtosecond Laser Irradiation of Single-Crystal Silicon: Evolution of Micro-Nano Structures and Damage Investigation. Materials and Design, 2023, 225(2): 111443 Genwang Wang; Ye Ding; Yanchao Guan; Yang Wang; Lijun Yang. Model heat source using actual distribution of laser power density for simulation of laser processing. Journal of Central South University, 2022, 29(10): 3277-3293 Yao Lu; PeiYing Gao; Jianan Xu; Yang Wang; LiJun Yang. Enhanced 2D finite element model and its application in laser cutting of carbon fiber reinforced plastic composites. Applied Optics, 2022, 61(28): 8533 Lianfu Wang; Ye Ding; Jingyi Li; Yanchao Guan; Lijun Yang; Haitao Fang; Julong Yuan. Femtosecond laser induced one-step nanopatterning and preparation of rGO/RuO2 electrodes for high-performance micro-supercapacitors. Journal of Electroanalytical Chemistry, 2022, 919(50) Yanan Liu; Ye Ding; Liangliang Xu; In Wha Jeong; Lijun Yang. One-step femtosecond laser-induced monocrystalline silicon structure towards enhanced nano-hardness. Materials Letters, 2022, 325(7775) Yanan Liu; Ye Ding; Jichang Xie; Mingjun Chen; Lijun Yang; Xun Lv; Julong Yuan. Research on Monocrystalline Silicon Micro-Nano Structures Irradiated by Femtosecond Laser. Materials, 2022, 15(14) Yuan Li; Ye Ding; Bai Cheng; Junjie Cao; Lijun Yang. Numerical and Experimental Research on the Laser-Water Jet Scribing of Silicon. Applied Sciences, 2022, 12(8) Genwang Wang; Ye Ding; Yanchao Guan; Yang Wang; Lijun Yang. Tunable Electronic Properties of Few-Layer Tellurene under In-Plane and Out-of-Plane Uniaxial Strain. Nanomaterials, 2022, 12(5) Genwang Wang; Ye Ding; Haotian Long; Yanchao Guan; Xiwen Lu; Yang Wang; Lijun Yang. Simulation of Optical Nano-Manipulation with Metallic Single and Dual Probe Irradiated by Polarized Near-Field Laser. Applied Sciences, 2022, 12(02) Bai Cheng; Ye Ding; Yuan Li; Lijun Yang. Theoretical and Experimental Investigation on SiC/SiC Ceramic Matrix Composites Machining with Laser Water Jet. Applied Sciences, 2022, 12(03) Yanchao Guan; Genwang Wang; Shouxin Zhao; Lianfu Wang; Ye Ding; Lijun Yang. The Realization of ZnO Nanowires Interconnection through Femtosecond Laser Irradiation of Ag Nanoparticles Solder. Applied Sciences, 2022, 12(03) Ye Ding; Qiang Li; Jingyi Li; Lianfu Wang; Lijun Yang. Insights into the surface responses of graphene oxide irradiated by an infrared femtosecond laser. Journal of Physics D: Applied Physics, 2022, 55 Yao Lu; Ye Ding; MaoLu Wang; Lijun Yang; Yang Wang. A characterization of laser cleaning painting layer from steel surface based on thermodynamic model. The International Journal of Advanced Manufacturing Technology, 2021, 116: 1989-2002 Yao Lu; Ye Ding; MaoLu Wang; Lijun Yang; Yang Wang. An environmentally friendly laser cleaning method to remove oceanic micro-biofoulings from AH36 steel substrate and corrosion protection. Journal of Cleaner Production, 2021, 314: 127961 Yanan Liu; Ye Ding; Lijun Yang; Ronglu Sun; Tiangang Zhang; Xuejiao Yang. Research and progress of laser cladding on engineering alloys: A review. Journal of Manufacturing Processes, 2021, 66: 341-363 Qiang Li; Ye Ding; Lijun Yang; Linlin Li; Yang Wang. Periodic nanopatterning and reduction of graphene oxide by femtosecond laser to construct high-performance micro-supercapacitors. Carbon, 2021, 172: 144-153 Cheng Bai; Ding Ye; Li Yuan; Li Jingyi; Xu Junjie; Li Qiang; Yang Lijun. Coaxial helical gas assisted laser water jet machining of SiC/SiC ceramic matrix composites. Journal of Materials Processing Technology, 2021, 293: 117067 Xiwen Lu; Jinhang Liu; Ye Ding; Lijun Yang; Zhang Yang; Yang Wang. Simulation and fabrication of carbon nanotube-nanoparticle interconnected structures. Mechanical Sciences, 2021, 12: 451-459 Qiang Li; Qizhao Wang; Linlin Li; Lijun Yang; Yang Wang; Xiaohui Wang; Haitao Fang. Femtosecond Laser-Etched MXene Microsupercapacitors with Double-Side Configuration via Arbitrary On- and Through-Substrate Connections. Advanced Energy Materials , 2020, 2000470 Xianjun Kong; Ben Wang; Minghai Wang; Yaohui Zheng; Shujuan Ma; Lijun Yang. Microscratch characteristic and deformation mechanism of SiC particle-reinforced composites at elevated temperatures. Advanced Composites Letters, 2020, 29: 1-11 Kong Xianjun; Wang Minghai; Wang Ben; Zheng Yaohui; Yang Lijun. Thermal mismatch stress relaxation and dislocation transformation of 45%SiCp/Al composites by continuous diode laser heating. Applied Physics A-Materials Science & Processing, 2019, 125(9): 0-596. Lu Yao; Yang LiJun; Wang Yang; Chen Hao; Guo Bin; Tian Ze. Paint Removal on the 5A06 Aluminum Alloy Using a Continuous Wave Fiber Laser. COATINGS, 2019, 9(8): 0-488. Cheng Xiaoliang; Yang Lijun; Wang Maolu; Cai Yecheng; Wang Yang; Ren Zhixing. The unbiased propagation mechanism in laser cutting silicon wafer with laser induced thermal-crack propagation. Applied Physics A-Materials Science & Processing, 2019, 125(7): 0-479. Ding Ye; Yang LiJun; Hong MingHui. Enhancement of pulsed laser ablation assisted with continuous wave laser irradiation. Science China Physics,Mechanics & Astronomy, 2019, 62(3): 0-034211. Li Qiang; Yang Lijun; Hou Chaojian; Adeyemi Oluwaseun; Chen Chaoyi; Wang Yang. Surface ablation properties and morphology evolution of K24 nickel based superalloy with femtosecond laser percussion drilling. Optics and Lasers in Engineering, 2019, 114: 22-30. He Yuanzhe; Wang Lefeng; Li Qiang; Rong Weibin; Sun Lining; Yang Lijun. Design, analysis and experiments of a magnetic microrobot capable of locomotion and manipulation at water surfaces. Journal of Micromechanics and Microengineering, 2019, 29(2): 0-025010. Xiaoliang Cheng; Lijun Yang; Maolu Wang; Yecheng Cai; Yang Wang; Zhixing Ren. Laser beam induced thermal-crack propagation for asymmetric linear cutting of silicon wafer. Optics & Laser Technology, 2019, 120: 105765-105765 Cheng Xiaoliang; Yang Lijun; Wang Maolu; Cai Yecheng; Wang Yang; Ren Zhixing. Laser beam induced thermal-crack propagation for asymmetric linear cutting of silicon wafer. Optics and Laser Technology, 2019, 120: 0-105765. Yuanzhe He; Lefeng Wang; Qiang Li; Lijun Yang; Weibin Rong; Lining Sun. Characterization of rotary magnetic micromotor supported on single droplet. Journal of Micromechanics and Microengineering, 2019, 29(12): 125010-125010 Xianjun Kong; Minghai Wang; Ben Wang; Yaohui Zheng; Lijun Yang. Thermal mismatch stress relaxation and dislocation transformation of 45%SiCp/Al composites by continuous diode laser heating. Applied Physics A, 2019, 125(9): 596-596 Xiaoliang Cheng; Lijun Yang; Maolu Wang; Yecheng Cai; Yang Wang; Zhixing Ren. The unbiased propagation mechanism in laser cutting silicon wafer with laser induced thermal-crack propagation. Applied Physics A, 2019, 125(7): 479-479 Ye Ding; Lijun Yang; Minghui Hong. Enhancement of pulsed laser ablation assisted with continuous wave laser irradiation. SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY, 2019, 62 Wang Genwang; Hou Chaojian; Long Haotian; Yang Lijun; Wang Yang. Electronic and Optoelectronic Nanodevices Based on Two-Dimensional Semiconductor Materials. Acta Physico - Chimica Sinica, 2019, 35(12): 1319-1340 Lu Xiwen; Yang Lijun; Xie Hui; Yang Zhan; Cui Jianlei; Wang Yang. Simulations of the Near-Field Enhancement on AFM Tip Irradiated by Annular Laser Beam. IEEE Transactions on Nanotechnology, 2019, 18: 979-982. Hou Chaojian; Yang Lijun; Li Bo; Zhang Qihan; Li Yuefeng; Yue Qiuyang; Wang Yang; Yang Zhan; Dong Lixin. Multilayer Black Phosphorus Near-Infrared Photodetectors. Sensors, 2018, 18(6): 0-1668. Lijun Yang; Ye Ding; Bai Cheng; Jiangtao He; Genwang Wang; Yang Wang. Investigations on femtosecond laser modified micro-textured surface with anti-friction property on bearing steel GCr15. Applied Surface Science, 2018, 434: 831-842. DING Ye; XUE Yao; PANG JiHong; YANG LiJun; HONG MingHui. Advances in In-situ Monitoring Technology for Laser Processing. SCIENTIA SINICA Physica, Mechanica & Astronomica, 2018, 49(4): 60-78 Chaojian Hou; Yang Wang; Lijun Yang; Bo Li; Ziqing Cao; Qihan Zhang; Yaqiong Wang; Zhan Yang; Lixin Dong. Position sensitivity of optical nano-antenna arrays on optoelectronic devices. Nano Energy, 2018, 53: 734-744 Shouchong Fu; Lijun Yang; Hongzhi Zhang; Yang Wang; Chiguan Xin; Ye Ding. Numerical Simulation of the Twist Deformation for the Stiffened Panel with Laser Forming. International Journal of Precision Engineering and Manufacturing, 2018, 19: 1569-1582

学术兼职

中国机械工程学会成组与智能集成技术分会与生产工程分会理事中国宇航学会光电技术委员会委员黑龙江省刀具技术协会副秘书长中国微米纳米技术学会高级会员中国微米纳米技术学会微纳机器人分会理事中国光学工程学会理事会理事 IEEE高级会员 Laser, Optics and Photonics 国际学术会议主席 MARSS国际学术会议技术委员会委员《Digital twin》国际杂志编委《Materials》国际杂志编委《Nano. Lett.》、《ACS Appl.Mater. Inter.》、《Nanotechnology》、《J. Phys. Chem. B》、、《Int. J. Mach. Tool. Manu.》、《Int. J. Adv. Manu. Tech.》、《Surf. Sci.》、《Measurement》、《Chinese Phys. B》、《Precis. Eng.》等20余种国际杂志审稿人