近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Wenyu Ding, Linjie Zhao, Mingjun Chen*, et al.“Determination of stress waves and their effect on the damage extension induced by surface defects of KDP crystals under intense laser irradiation.”Optica. 2023, 10(6): 671-681. (SCI, IF: 10.4/2022). Link
Dinghuai Yang, Linjie Zhao, Jian Cheng*, Mingjun Chen*, et al.“Unveiling sub-bandgap energy-level structures on machined optical surfaces based on weak photo-luminescence.”Nanoscale. 2023. (SCI, IF: 6.7/2022). Link
Jinchuan Tian, Henan Liu, Jian Cheng, Mingjun Chen*, et al.“A novel specialized material removal rate model considering the synergistic effect of dynamic pressure and shear stress for the permanent-magnet small ball-end magnetorheological polishing.”Journal of Manufacturing Processes. 2023, 101:1431-1442. (SCI, IF: 6.2/2022). Link
Dinghuai Yang, Linjie Zhao, Mingjun Chen, et al.“A novel method to characterize the residual stress on the fused silica surface based on the evolution of the atomic point defects.”Applied Surface Science. 2023, 640: 158323. (SCI, IF: 6.7/2022). Link
Dinghuai Yang, Jian Cheng*, Linjie Zhao, Mingjun Chen, et al.“Relationship between the photoluminescence envelope area of surface defects and the laser-induced damage thresholds of mechanically machined fused silica optical surfaces.”Ceramics International. 2023, 49(14): 22767-22781. (SCI, IF: 5.2/2022). Link
Xingying Zhou, Henan Liu, Yianyu Yu, Ruiyang Guo, Guangzhou Wang, Yazhou Sun, Mingjun Chen*.“Experimental and modeling study of surface topography generation considering tool-workpiece vibration in high-precision turning.”Chinese Journal of Aeronautics. 2023, 36(7): 194-212. (SCI, IF: 5.7/2022). Link
Jinchuan Tian, Mingjun Chen, et al. “A novel method of water bath heating assisted small ball-end magnetorheological polishing for hemispherical shell resonators.”Chinese Journal of Aeronautics. 2023. (SCI, IF: 5.7/2022). Link
Biao Qin, Henan Liu, Jian Cheng, Jinchuan Tian, Jiangang Sun, Zihan Zhou, Chuanzhen Ma, Mingjun Chen*. “Hemispherical resonator with low subsurface damage machined by small ball-end fine diamond grinding wheel: A novel grinding technique.”Chinese Journal of Aeronautics. 2023. (SCI, IF: 5.7/2022). Link
Yulong Gao, Mingyu Gao, Fei Wang, Junyan Liu, Feng Yang, Jie Sheng, Mingjun Chen, et al. “Convolution neural network fusion high power halogen lamp induced thermal-wave diffusion multidimensional features: An intelligent defect identification approach for aviation honeycomb sandwich composites.”Infrared Physics & Technology. 2023, 133: 104772. (SCI, IF: 3.3/2022). Link
Qi Liu, Mingjun Chen*, et al.“Ultra-Precision Manufacturing Technology for Difficult-to-Machine Materials.”Materials. 2023, 16(12): 4322. (SCI, IF: 3.4/2022). Link
Dinghuai Yang, Jian Cheng*, Linjie Zhao, Mingjun Chen, et al. “Mechanisms of the sharp decrease of the LIDT from the plastic surface defect to the brittle surface defect on optical surface.”Applied Surface Science. 2023, 629: 157394. (SCI, IF: 6.7/2022). Link
Ruiyang Guo, Tianyu Yu, Mingjun Chen*.“Frictional behavior of tool-workpiece on surface quality of glow discharge polymer during micro-milling.”Wear. 2023, 522: 204707. (SCI, IF: 5.0/2022). Link
Guotai Li, Tianyu Yu*, Pan Wu, Mingjun Chen.“Molecular dynamics simulation of phase transformation and wear behavior of Ni35Al30Co35 high temperature shape memory alloy.”Wear. 2023, 522: 204849. (SCI, IF: 5.0/2022). Link
Xingying Zhou, Yianyu Yu, Guangzhou Wang, Ruiyang Guo, Yanxu Fu, Yazhou Sun, Mingjun Chen*.“Tool wear classification based on convolutional neural network and time series images during high precision turning of copper.”Wear. 2023, 522: 204692. (SCI, IF: 5.0/2022). Link
Guangzhou Wang, Mingjun Chen*, Xingying Zhou.“Modelling and analysis of the micro-milling of micro-dimpled structures with copying method on glow discharge polymer (GDP).”Wear. 2023, 523: 204776. (SCI, IF: 5.0/2022). Link
Pan Wu , Tianyu Yu*, Mingjun Chen.“Magnetically-assisted digital light processing 4D printing of flexible anisotropic soft-Magnetic composites.”Virtual and Physical Prototyping. 2023, 18:1. (SCI, IF: 10.6/2022). Link
Pan Wu, Tianyu Yu*, Guotai Li, Mingjun Chen. “Magnetic field-assisted DLP of CIPs/resin composites: Mechanical properties, anisotropic magnetic performance and wear behavior.”Wear. 2023, 523: 204800. (SCI, IF: 5.0/2022). Link
Zixuan Chen, Ye Tian, Jingguo Zhu, Laixi Sun, Fang Wang, Yizhang Ai, Hongjie Liu, Xuewei Deng, Mingjun Chen, et al. “Laser Damage Performance Study of Fundamental Frequency Dielectric Film Optical Elements.”Crystals. 2023, 13(4): 571. (SCI, IF: 2.7/2022). Link
Zhaoyang Yin, Henan Liu, Linjie Zhao*, Jian Cheng, Chao Tan, Xiaotao Li, Yankang Chen, Zhiyu Lin, Mingjun Chen. “Efficient and precise detection for surface flaws on large-aperture optics based on machine vision and machine learning.”Optics & Laser Technology. 2023, 159: 109011. (SCI, IF: 5.0/2022). Link
Tianyu Yu*, Xiaolong Zhu, Hongwei Yu, Pan Wu, Chun Li, Xiaoxiao Han, Mingjun Chen. “Material extrusion-based additive manufacturing of zirconia toughened alumina: Machinability, mechanical properties and biocompatibility.”Journal of Manufacturing Processes. 2023, 94: 120-132. (SCI, IF: 6.2/2022). Link
Jiacheng Wei, Yu He, Fei Wang*, Yuyu He, Xiaoxu Rong, Mingjun Chen, et al. “Convolutional neural network assisted infrared imaging technology: An enhanced online processing state monitoring method for laser powder bed fusion.”Infrared Physics & Technology. 2023, 131: 104661. (SCI, IF: 3.3/2022). Link
Qi Liu, Jian Cheng, Zhirong Liao, Mingyu Liu, Mingjun Chen*, et al. “Fractal Analysis on Machined Surface Morphologies of Soft-Brittle KDP Crystals Processed by Micro Ball-End Milling.”Materials. 2023, 16(5): 1782. (SCI, IF: 3.4/2022). Link
Dinghuai Yang, Jian Cheng*, Linjie Zhao, Mingjun Chen, et al.“Evolution of the point defects involved under the action of mechanical forces on mechanically machined fused silica surfaces.”Optics Express. 2023, 31(5): 7684-7706. (SCI, IF: 3.8/2022). Link
Xianglin Meng, Fei Wang*, Zhipeng Liang, Xuan Zhang, Jiexin Weng, Zhijie Li, Junyan Liu*, Mingjun Chen, et al. “Research on the detection of silica/phenolic composite surface cracks using instantaneous high-power xenon lamp-induced chirp-pulsed radar thermography.”Measurement. 2023, 209: 112494. (SCI, IF: 5.6/2022). Link
Guotai Li, Tianyu Yu, Pan Wu, Mingjun Chen. “Molecular Dynamics Simulation of NiTi Shape Memory Alloys Produced by Laser Powder Bed Fusion: Laser Parameters on Phase Transformation Behavior.”Materials. 2023, 16(1): 409. (SCI, IF: 3.4/2022). Link
Tianyu Yu*, Yuan Tian, Mingjun Chen. “A novel method to additively repair micro-damaged fused silica using localized CO2 laser.”Materials Letters. 2023, 349: 134901. (SCI, IF: 3.0/2022). Link
马传震，刘赫男，陈明君*，等. 半球谐振子关键性能及制造工艺研究新进展. 机械工程学报. 2023. Link
马传震，刘赫男，陈明君*，等. 半球谐振子几何参量对其热弹性阻尼影响研究. 机械工程学报. 2023. Link
Jinchuan Tian, Mingjun Chen, Henan Liu, et al. “Study on mechanism of improving efficiency of permanent-magnet small ball-end magnetorheological polishing by increasing magnetorheological fluid temperature.” Scientific Reports. 2022, 12: 7705. (SCI, IF: 4.996/2021). Link
Chao Tan, Linjie Zha, MingJun Chen, Jian Cheng, et al. “Repaired morphology of CO2 laser rapid ablation mitigation of fused silica and its influence on downstream light modulation.” Science China Technological Sciences. 2022, 65(5): 1116-1126. (SCI, IF: 3.903/2021). Link
Chao Tan, Linjie Zhao, Mingjun Chen, Jian Cheng, et al. “Morphology evolution mechanisms and localized structural modification of repaired sites on fused silica optics processed by CO2 laser rapid ablation mitigation.” Optics & Laser Technology. 2022, 147: 107648. (SCI, IF: 4.939/2021). Link
Chao Tan, Linjie Zhao, Mingjun Chen, Jian Cheng, et al. “Heat accumulation effect during CO2 laser processing of fused silica optics.” Results in Physics. 2022, 34: 105308. (SCI, IF: 4.565/2021). Link
Jian Cheng*, Zican Yang, Chen Wang, Linjie Zhao, Mingjun Chen, et al. “Effect of scratches on the damage characteristics of fused silica optics under extremely-high impact load.” International Journal of Mechanical Sciences. 2022, 219: 107099. (SCI, IF: 6.772 /2021). Link
Linjie Zhao, Zhaoyang Yin, Dezhi Zhang, Jian Cheng, Hao Yang, Chao Tan, Qi Liu, Mingjun Chen, and Xiaodong Yuan. “A Novel Subpixel Size Calibration Method for the Size Detection of Microtarget on Large-Aperture Optics Surface.” IEEE Transactions on Instrumentation and Measurement. 2022, 71: 5001810. (SCI, IF: 5.332/2021). Link
Jinchuan Tian, Henan Liu, Jian Cheng, Mingjun Chen, et al.“Improving the small ball-end magnetorheological polishing efficiency of fused silica workpiece by the promoting effect of water-bath heating and sodium hydroxide addition on polishing velocity and chemical reaction.”The International Journal of Advanced Manufacturing Technology. 2022, 123(1-2): 645-656. (SCI, IF: 3.563/2021). Link
Qi Liu, Jian Cheng, Zhirong Liao, Xichun Luo, Yue Yang, Mingquan Li, Hao Yang, Chao Tan, Guangzhou Wang, Wenyu Ding, Zhaoyang Yin, Linjie Zhao*, Mingjun Chen.“Research on the light intensity modulation and characterizing methods of surface texture on KDP optics generated in fly-cutting and micro ball-end milling processes.”CIRP Journal of Manufacturing Science and Technology. 2023, 41: 30-43. (SCI, IF: 4.8/2022). Link
Zhaoyang Yin, Mingjun Chen, et al.“A novel automatic classification approach for micro-flaws on the large-aperture optics surface based on multi-light source fusion and integrated deep learning architecture.”Journal of Intelligent Manufacturing. 2022: 1-16. (SCI, IF: 7.136/2021). Link
Xiguang Li, Chunya Wu*, Bo Hou, Jiahao Wu, Ruijiang Sun, Mingjun Chen. “Molecular investigation of interplay mechanism between polydopamine and graphene oxide: The effect of oxidation degree on the adsorption behavior of polydopamine.”Applied Surface Science. 2023, 611: 155759. (SCI, IF: 6.7/2022). Link
Wenyu Ding, Mingjun Chen, et al. “Laser damage evolution by defects on diamond fly-cutting KDP surfaces.”International Journal of Mechanical Sciences. 2023, 237: 107794. (SCI, IF: 7.3/2022). Link
Guangzhou Wang, Tianyu Yu, Xingying Zhou, Ruiyang Guo, Mingjun Chen*, Yazhou Sun. “Material removal mechanism and microstructure fabrication of GDP during micro-milling.”International Journal of Mechanical Sciences. 2023, 240: 107946. (SCI, IF: 7.3/2022). Link
Pan Wu, Tianyu Yu, Mingjun Chen, et al. “Effect of printing speed and part geometry on the self-deformation behaviors of 4D printed shape memory PLA using FDM.”Journal of Manufacturing Processes. 2022, 84: 1507-1518. (SCI, IF: 5.684/2021). Link
Hongqin Lei, Jian Cheng*, Dinghuai Yang, Linjie Zhao, Mingjun Chen, et al. “Effect of Pre-Existing Micro-Defects on Cutting Force and Machined Surface Quality Involved in the Ball-End Milling Repairing of Flawed KDP Crystal Surfaces.”Materials. 2022, 15(21): 7407. (SCI, IF: 3.748/2021). Link
Fei Wang, Yihao Zhou, Xuan Zhang, Zhijie Li, Jiexin Weng, Guiyan Qiang, Mingjun Chen, et al. “Laser-induced thermography: An effective detection approach for multiple-type defects of printed circuit boards (PCBs) multilayer complex structure.”Measurement. 2023, 206: 112307. (SCI, IF: 5.6/2022). Link
Guangzhou Wang, Tianyu Yu, Xingying Zhou, Ruiyang Guo, Mingjun Chen*.“Investigation on minimum uncut chip thickness and size effect in micro milling of glow discharge polymer (GDP).”Journal of Manufacturing Processes. 2022, 84: 786-797. (SCI, IF: 5.684/2021). Link
Bo Hou, Chunya Wu*, Henan Liu, Ruijiang Sun, Xiguang Li, Chang Liu, Jiahao Wu, Mingjun Chen*. “Shape approximation of sessile droplet by the equivalence between vertical capillary force and hydrostatic pressure.”Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2023, 656: 130203. (SCI, IF: 5.2/2022). Link
Guotai Li, Tianyu Yu*, Ning Zhang, Mingjun Chen. “The effect of Ni content on phase transformation behavior of NiTi alloys: An atomistic modeling study.”Computational Materials Science. 2022, 215: 111804. (SCI, IF: 3.572/2021). Link
Ruiyang Guo, Mingjun Chen*, et al. “Milling force prediction and optimization of process parameters in micro-milling of glow discharge polymer.”The International Journal of Advanced Manufacturing Technology. 2022, 122(3-4): 1293-1310. (SCI, IF: 3.563/2021). Link
Jian Cheng*, Yunhao Xing, Enjie Dong, Linjie Zhao, Henan Liu, Tingyu Chang, Mingjun Chen, et al. “An Overview of Laser Metal Deposition for Cladding: Defect Formation Mechanisms, Defect Suppression Methods and Performance Improvements of Laser-Cladded Layers.”Materials. 2022, 15(16): 5522. (SCI, IF: 3.748/2021). Link
Wenyu Ding, Jian Cheng*, Linjie Zhao, Zhenhua Wang, Hao Yang, Zhichao Liu, Qiao Xu, Jian Wang, Feng Geng, Mingjun Chen*. “Determination of intrinsic defects of functional KDP crystals with flawed surfaces and their effect on the optical properties.”Nanoscale. 2022, 14(28): 10041-10050. (SCI, IF: 8.307/2021). Link
Tianyu Yu*, Mingjun Chen, et al.“Experimental and numerical study of deposition mechanisms for cold spray additive manufacturing process.”Chinese Journal of Aeronautics. 2022, 35(2): 276-290. (SCI, IF: 4.061/2021). Link
Yanan Liu, Ye Ding, Jichang Xie*, Mingjun Chen, et al. “Research on Monocrystalline Silicon Micro-Nano Structures Irradiated by Femtosecond Laser.”Materials. 2022, 15(14): 4897. (SCI, IF: 3.748/2021). Link
Wei Li, Xueyan Zhu, Xiaochun Wang, Fei Wang*, Junyan Liu*, Mingjun Chen, et al. “Segmentation and accurate identification of large carious lesions on high quality x-ray images based on Attentional U-Net model. A proof of concept study.”Journal of Applied Physics. 2022, 132(3). (SCI, IF: 2.877/2021). Link
Xianglin Meng, Fei Wang*, Junyan Liu*, Mingjun Chen, et al. “Phase shifting profilometry based on Hilbert transform: An efficient phase unwrapping algorithm.”Journal of Applied Physics. 2022, 131(19). (SCI, IF: 2.877/2021). Link
Fei Wang, Zhuoyan Yue, Junyan Liu*, Hong Qi, Wenjun Sun, Mingjun Chen, et al. “Quantitative imaging of printed circuit board (PCB) delamination defects using laser-induced ultrasound scanning imaging.”Journal of Applied Physics. 2022, 131(5). (SCI, IF: 2.877/2021). Link
Fei Wang, Lianjun Wu*, Xiaochun Wang*, Yuming Liang, Junyan Liu*, Mingjun Chen, et al.“Accurate identification and detection of occlusal/smooth early caries using thermal-wave radar imaging (TWRI) technique under low temperature rising condition.”Measurement. 2022, 188: 110517. (SCI, IF: 5.131/2021). Link
Mingyu Gao, Fei Wang*, Junyan Liu*, Peng Song, Jianfeng Chen, Hong Yang, Hongbo Mu, Dawei Qi, Mingjun Chen, et al. “Estimation of the convolutional neural network with attention mechanism and transfer learning on wood knot defect classification.”Journal of Applied Physics. 2022, 131(23). (SCI, IF: 2.877/2021). Link
Xiaoxu Rong, Jianghao Zhao, Zhuoyan Yue, Fei Wang*, Junyan Liu*, Yong Zhang, Guiyan Qiang, Jingxiang Sun, Jiacheng Wei, Yang Wang, Mingjun Chen, et al. “Rapid detection for the surface and hidden crack of solid propellant motor charge using laser arrays scanning thermography (LAsST).”Infrared Physics & Technology. 2022, 125: 104321. (SCI, IF: 2.997/2021). Link
Zican Yang, Jian Cheng, Mingjun Chen, et al. “Formation mechanism of bubbles in the crack healing process of fused silica using a CO2 laser.” Optics Express. 2021, 29 (20): 32089-32104. (SCI, IF: 3.833/2021). Link
Qi Liu, Mingjun Chen, Zhirong Liao, et al. “On the improvement of the ductile removal ability of brittle KDP crystal via temperature effect.” Ceramics International. 2021, 47 (23): 33127-33139. (SCI, IF: 5.532 /2021). Link
Yang Hao, Jian Cheng, Zhichao Liu, Qi Liu, Linjie Zhao, Chao Tan, Jian Wang, and Mingjun Chen*.“Application of Light Diffraction Theory to Qualify the Downstream Light Field Modulation Property of Mitigated KDP Crystals.” Opt Laser Technol, 2021, 138: 106873. (SCI, IF:3.233/2019). Link
Tan Chao, Linjie Zhao, Mingjun Chen*, Jian Cheng, et al.“Formation Mechanism of Surface Morphology in the Process of CO2 Pulsed Laser Processing of Fused Silica Optics.” Opt Laser Technol, 2021. 138: 106838. (SCI, IF:3.233/2019). Link
Zhao Linjie, Jian Cheng, Zhaoyang Yin, Hao Yang, Mingjun Chen*, and Xiaodong Yuan. “Research on Precision Automatic Tool Setting Technology for KDP Crystal Surface Damage Mitigation Based on Machine Vision.” J Manuf Process, 2021. 64: 750–757. (SCI, IF: 4.086/2019). Link
Tan Chao, Linjie Zhao, Mingjun Chen*, Jian Cheng, et al.“Physical Mechanism of Pulsed Laser Interaction with Fused Silica Optics during CO2 Laser Mitigation Process.” J Non Cryst Solids, 2021. 558: 120662. (SCI, IF: 2.929/2019). Link
Hou Bo, Chunya Wu, Xiguang Li, Junjie Huang, and Mingjun Chen*. "Contact Line-Based Model for the Cassie-Wenzel Transition of a Sessile Droplet on the Hydrophobic Micropillar-Structured Surfaces." Appl Surf Sci, 2021. 542: 148611. (SCI, IF: 6.182/2019). Link
Wang Tingzhang, Henan Liu, Chunya Wu, Jian Cheng, Tianyu Yu, and Mingjun Chen*. “Wear Characteristics of Small Ball-End Fine Diamond Grinding Pins Dressed by on-Machine Electrical Discharge.” Wear, 2021. 203765. (SCI, IF: 4.108/2019). Link
Liu Qi, Zhirong Liao, Jian Cheng, Dongdong Xu, and Mingjun Chen*. "Mechanism of Chip Formation and Surface-Defects in Orthogonal Cutting of Soft-Brittle Potassium Dihydrogen Phosphate Crystals." Mater Des, 2021. 198: 109327. (SCI, IF: 6.289/2019). Link
Tan Chao, Linjie Zhao, Mingjun Chen*, Jian Cheng, et al. “Combined Studies of Surface Evolution and Crack Healing for the Suppression of Negative Factors during CO2 Laser Repairing of Fused Silica.” Chin Opt Lett, 2021. 19 (4): 41402. (SCI, IF: 2.045/2019). Link
Yu, Tianyu, Mingjun Chen*, and Zhuoru Wu. “Experimental and Numerical Study of Deposition Mechanisms for Cold Spray Additive Manufacturing Process.” Chinese Journal of Aeronautics. 2021. (SCI, IF: 2.215/2019). Link
Yu, Tianyu, Junyan Liu, Yu He, Jinchuan Tian, Mingjun Chen*, and Yang Wang. "Microstructure and Wear Characterization of Carbon Nanotubes (CNTs) Reinforced Aluminum Matrix Nanocomposites Manufactured Using Selective Laser Melting." Wear, 2020. 203581. (IF: 4.108/2019). Link
Yang, Hao, Jian Cheng, Zhichao Liu, Qi Liu, Linjie Zhao, Chao Tan, Jian Wang, and Mingjun Chen*. "Potential Damage Threats to Downstream Optics Caused by Gaussian Mitigation Pits on Rear KDP Surface." High Power Laser Science and Engineering, 2020. 8 (4). (SCI, IF: 2.606/2019). Link
Wang, Tingzhang, Henan Liu, Chunya Wu, Jian Chen, and Mingjun Chen*. “Interference and Grinding Characteristics in Ultra-Precision Grinding of Thin-Walled Complex Structural Component Using a Ball-End Grinding Wheel.” Chinese Journal of Aeronautics, 2021. 34 (4): 192–207. (SCI, IF: 2.215/2019). Link
Yang, Hao, Jian Cheng, Zhichao Liu, Qi Liu, Linjie Zhao, Chao Tan, Jian Wang, and Mingjun Chen*. “Model Development for Nanosecond Laser-Induced Damage Caused by Manufacturing-Induced Defects on Potassium Dihydrogen Phosphate Crystals.” ACS Omega, 2020. 5 (31): 19884–95. (SCI, IF:2.87/2019). Link
赵林杰,程健,陈明君*,袁晓东,等. 熔石英光学元件的CO2激光加工技术研究新进展[J].机械工程学报, 2020,56(11):202-218. (EI).
Zhao, Linjie, Jian Cheng, Zhaoyang Yin, Hao Yang, Qi Liu, Chao Tan, Wei Liao, Mingjun Chen*, and Xiaodong Yuan. "Rapid CO2 Laser Processing Technique for Fabrication of Micro-Optics and Micro-Structures on Fused Silica Materials." Proc Inst Mech Eng B J Eng Manuf. 2020. (SCI, IF:1.982/2019). Link
Yang, Hao, Jian Cheng, Zhichao Liu, Qi Liu, Linjie Zhao, Jian Wang, and Mingjun Chen*. “Dynamic Behavior Modeling of Laser-Induced Damage Initiated by Surface Defects on KDP Crystals under Nanosecond Laser Irradiation.” Scientific Reports, 2020.10(1): 500. (SCI, IF:3.998/2019). Link
Zhao, Linjie, Jian Cheng, Mingjun Chen*, Xiaodong Yuan, et al. “Formation Mechanism of a Smooth, Defect-Free Surface of Fused Silica Optics Using Rapid CO2 Laser Polishing.”International Journal of Extreme Manufacturing, 2019. 1(3): 35001.(ESCI) Link
Tan, Chao, LinJie Zhao, Chen Mingjun*, Jian Cheng, et al. Optical Modulation of Repaired Damage Site on Fused Silica Produced by CO2 Laser Rapid Ablation Mitigation. Chin. Phys. B 2020, 29(5) : 54209-054209.(SCI, IF=1.223/2019) Link
Tan, Chao, Linjie Zhao, Chen Mingjun*, Jian Cheng, and Wei Liao. "Experimental and Theoretical Investigation of Localized CO2 Laser Interaction with Fused Silica During the Process of Surface Damage Mitigation." Results in Physics 16 (2020): 102936. (SCI, IF=4.019/2019)Link
Wang Tingzhang, Wu Chunya, Liu Henan, Chen Mingjun*, Cheng Jian, Su Dingning, et.al. On-machine electric discharge truing of small ball-end fine diamond grinding wheels, Journal of Materials Processing Technology, 2020,277:116472 (SCI, IF=4.669/2019)Link
Wang Tingzhang, Liu Henan, Wu Chunya, Cheng Jian, Chen Mingjun*. Three-dimensional modeling and theoretical investigation of grinding marks on the surface in small ball-end diamond wheel grinding, International Journal of Mechanical Science, 2020, 173: 105467(SCI, IF=4.631/2019)Link
Wang Tingzhang, Wu Chunya, Liu Henan, Chen Mingjun*, Cheng Jian, Fang Zhen, Yu Bo. Configuration design and accuracy analysis of special grinding machine for thin-walled small concave surfaces, Precision Engineering, 2019, 56: 293-302. (SCI, IF=3.108/2019)Link
Wang Tingzhang, Cheng Jian, Liu Henan, Chen Mingjun*, Wu Chunya, Su Dingning. Ultra-precision grinding machine design and application in grinding thin-walled complex component with small ball-end diamond wheel, The International Journal of Advanced Manufacturing Technology,2019, 101:2097–2110. (SCI, IF:3.108/2019)Link
Wu Chunya, Zhu Qing, Zheng Ting, Yang Xiaonan, Wang Tingzhang, Hou Bo, He Xiaodong, Luo Guan, Li Shangbin, Chen Mingjun*. Experimental and theoretical investigations on the adherent behaviors of high viscosity liquid: The effect of surface topography[J]. Fluid Phase Equilibria, 2019, 486: 11-20. (SCI, IF=2.514/2018)Link
Wu Chunya, Zhu Qing, Zheng Ting, Guo Chuangqiang, Wang Tingzhang, Hou Bo, He Xiaodong, Luo Guan, Li Shangbin, Chen Mingjun*. Molecular investigation of adsorption behaviors of hydroxyl-terminated polybutadiene (HTPB) binders onto copper surface: The effects of aluminum nanoparticles[J]. Applied Surface Science, 2019, 486: 383-393. (SCI, IF=5.155/2018)Link
Liu Qi, Cheng Jian, Yang Hao, Xu Yafei, Zhao Linjie, Tan Chao, Chen Mingjun*. Modeling of residual tool marks formation and its influence on the optical performance of KDP optics repaired by micro-milling. Optical Materials Express, 2019, 9:3789-3807. (SCI, IF: 2.673/2018)Link
Liu Qi, Cheng Jian, Liao Zhirong, Yang Hao, Zhao Linjie, Chen Mingjun*. Incident laser modulation by tool marks on micro-milled KDP crystal surface: Numerical simulation and experimental verification. Optics and Laser Technology, 2019, 119:105610. (SCI, IF: 3.319/2018) Link
Zhao Linjie, Cheng Jian, Chen Mingjun*, Yuan Xiaodong, Liao Wei, Wang Haijun, Liu Qi, Yang Hao. Toward little heat-affected area of fused silica materials using short pulse and high power CO2 lasers [J]. Results in Physics, 2019, 12, 1363-1371.(IF:3.042/2018)Link
Cheng Jian, Yang Hao, Liu Qi, Zhao Linjie, Liu Zhichao, Liu Henan, Wang Tingzhang, Xiao Yong, Hu Kehui, Chen Mingjun*, Tan Jiubin. Characterization of manufacturing-induced surface scratches and their effect on laser damage resistance performance of diamond fly-cut KDP crystal[J]. Results in Physics, 2019, 15: 102753.(IF:3.042/2018)Link
Cheng Jian, Xiao Yong, Liu Qi, Yang Hao, Zhao Linjie, Chen Mingjun*, Tan Jiubin, Liao Wei, Chen, Jing, Yuan Xiaodong. Effect of surface scallop tool marks generated in micro-milling repairing process on the optical performance of potassium dihydrogen phosphate crystal [J]. Material& Design, 2018,157: 447-456. (IF:4.525/2017)Link
Zheng Ting, Wu Chunya, Zhang Yu, Chen Mingjun*, Cummings, Peter T. Molecular Investigation of the Initial Nucleation of Calcium Phosphate on TiO2 Substrate: The Effects of Surface Nanotopographies [J] Crystal Growth & Design, 2018, 18(6): 3283-3290. (IF:3.972/2017)Link
Wang Tingzhang, Cheng Jian, Liu Henan, Chen Mingjun*, Wu Chunya, Fang Zhen, Yu Bo. Effects of kinematic parameters on electric discharge truing of small ball-end diamond wheels for small concave surfaces grinding [J]. Precision Engineering, 2018,51: 117-127.(IF:3.108/2019)Link
Chen Ni, Wu Chunya, Chen Mingjun*, Li Liang, He Ning. Research on the Relationship between Cutting Force and Machined Surface Quality in Micro Ball End-Milling of Potassium Dihydrogen Phosphate Crystal [J]. Micromachines, 2018, 9: 11. (IF:2.222/2017)Link
Liu Qi, Cheng Jian, Xiao Yong, Chen Mingjun*, Yang Hao, Wang Jinghe. Effect of tool inclination on surface quality of KDP crystal processed by micro ball-end milling. The International Journal of Advanced Manufacturing Technology 2018, 99, 2777-2788. (SCI, IF:2.496/2018)Link
Chen Ni, Chen Mingjun*, Wu Chunya, Pei Xudong, Qian Jun, Reynaerts Dominiek. Research in minimum undeformed chip thickness and size effect in micro end-milling of potassium dihydrogen phosphate crystal [J]. International Joural of Mechanical Sciences, 2017, 134: 387-398. (IF:3.570/2017)Link
Chen Ni, Chen Mingjun*, Wu Chunya, Pei Xudong. Cutting surface quality analysis in micro ball end-milling of KDP crystal considering size effect and minimum undeformed chip thickness [J]. Precision Enginerring, 2017, 50:410-420. (IF:2.582/2017)Link
Yang Hao, Cheng Jian, Cheng Mingjun*, Wang Jian, Liu Zhichao, An Chenhui, Zheng Yi, Hu Kehui, Liu Qi. Optimization of morphological parameters for mitigation pits on rear KDP surface: experiments and numerical modeling [J]. Optics Express, 2017, 25(15):18332-18345. (IF:3.356/2017)Link
Chen Mingjun*, Liu Henan, Cheng Jian, Yu Bo, Fang Zhen. Model of the material removal function and an experimental study on a magnetorheological finishing process using a small ball-end permanent-magnet polishing head [J]. Applied Optics, 2017, 56(19):5573-5582. (IF:1.791/2017)Link
Zheng Ting, Wu Chunya, Chen Mingjun*, et al. A DFT study of water adsorption on rutile TiO2 (110) surface: The effects of surface steps [J]. The Journal of chemical physics, 2016, 145(4): 044702. (IF:2.843/2017)Link
Zheng Ting, Wu Chunya, Chen Mingjun*, et al. Molecular mechanics of the cooperative adsorption of a Pro-Hyp-Gly tripeptide on a hydroxylated rutile TiO 2 (110) surface mediated by calcium ions[J]. Physical Chemistry Chemical Physics, 2016, 18(29): 19757-19764. (IF: 3.906/2017)Link
Chuangqiang Guo, Chunya Wu, Mingjun Chen*, Ting Zheng, Ni Chen, Peter T. Cummings. Molecular modeling of fibronectin adsorption on topographically nanostructured rutile (110) surfaces. Applied Surface Science, 2016, 384:36–44. (IF: 4.439/2017)Link
Jian Cheng, Mingjun Chen*, Kyle Kafka, Drake Austin, Jinghe Wang, Yong Xiao and Enam Chowdhury. Determination of ultra-short laser induced damage threshold of KH2PO4 crystal: Numerical calculation and experimental verification. AIP Advances. 2016, 6(3): 035221. (IF: 1.653/2017)Link
Henan Liu, Mingjun Chen*, Bo Yu, et al. Configuration design and accuracy analysis of a novel magnetorheological finishing machine tool for concave surfaces with small radius of curvature. Journal of Mechanical Science and Technology, 2016, 30(7): 3301-3311. (IF: 1.194/2017)Link
Zhenhai Xu, Yihui Zhao, Lin Yuan, Yi Qin, Mingjun Chen*, Debin Shan. The compensational boundary method to calculate the projected contact area of nanoindentation in atomistic simulations. Computational Materials Science, 2016, 112:185-192 (IF: 2.530/2017)Link
Ni Chen, Mingjun Chen*, Chunya Wu, Yanqiu Guo, Yanan Wang. The design and optimization of micro polycrystalline diamond ball end mill for repairing micro-defects on the surface of KDP crystal. Precision Engineering, 2016, 43:345-355 (SCI IF: 1.517/2014)Link
Chen, MJ*; Cheng, J; Yuan, XD; Liao, W; Wang, HJ; Wang, JH; Xiao, Y; Li, MQ. Role of tool marks inside spherical mitigation pit fabricated by micro-milling on repairing quality of damaged KH2PO4 crystal, Scientific Reports, 2015, 5: 14422 (SCI IF: 5.578/2014)Link
Mingjun Chen*, Ni Chen, Yanqiu Guo, Chunya Wu, Xuebin Wang. Study on the carbide tool wear mechanisms in micro milling stair-shape target of LiF crystal. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, DOI: 10.1007/s00170-015-7779-6 (SCI IF: 1.458/2014)Link
Mingjun Chen*, Henan Liu, Yinrui Su, Bo Yu, Zhen Fang. Development of a Magnetorheological Finishing Machine for Small-Bore Part of Irregular Shape and Experimental Study. International Journal of Advanced Manufacturing Technology 2015; DOI:10.1007/s00170-015-7573-5 (SCI IF: 1.458/2014)Link
Zhenhai Xu, Quanren Zeng, Lin Yuan, Yi Qin, Mingjun Chen*, Debin Shan. Molecular dynamics study of the interactions of incident N or Ti atoms with the TiN(001) surface. APPLIED SURFACE SCIENCE, 2015, DOI: 10.1016/j.apsusc.2015.11.090 (SCI IF: 2.711/2014)Link
Wu, Chunya; Chen, Mingjun*; Zheng, Ting; et al. Effect of surface roughness on the initial response of MC3T3-E1 cells cultured on polished titanium alloy, Bio-Medical Materials and Engineering, 2015, 26(S1): S155-S164 (SCI IF: 1.091/2014)Link
Chen, N; Chen, MJ*; Guo, YQ; Wang, XB. Effect of cutting parameters on surface quality in ductile cutting of KDP crystal using self-developed micro PCD ball end mill, The International Journal of Advanced Manufacturing Technology 78(1-4): 221-229 (SCI IF: 1.458/2014)Link
Xiao, Y, Chen, MJ*, Yang, YT, Cheng, J. Research on the critical condition of brittle-ductile transition about micro-milling of KDP crystal and experimental verification. International Journal of Precision Engineering and Manufacturing 16(2):351-359. (SCI IF: 1.458/2014)Link
Cheng, J; Chen, MJ*; Liao, W; Wang, HJ; Wang, JH; Xiao, Y; Li, MQ. Influence of surface cracks on laser-induced damage resistance of brittle KH2PO4 crystal. Optics Express, 2014, 22(23), 28740-28755 (SCI IF: 3.488/2014) Link
Chen, Mingjun*; Zheng, Ting; Wu, Chunya; Xing, Cheng. Molecular dynamics simulations of collagen adsorption onto grooved rutile surface: The effects of groove width. Colloids and Surfaces B: Biointerfaces 2015, 121: 150-157 (SCI IF: 4.152/2014)Link
Xiao, Y; Chen, MJ*; Cheng, J; Liao, W; Wang, HJ; Li, MQ. Effect of structural parameters of Gaussian repaired pit on light intensity distribution inside KH2PO4 crystal. Chinese Physics B,2014,Vol.8(23), 1674-1056 (SCI IF: 1.603/2014)Link
Chen, MJ*; Xiao, Y; Tian, WL; Wu, CY; Chu, X. Theoretical and experimental research on error analysis and optimization of tool path in fabricating aspheric compound eyes by precision micro milling. Chinese Journal of Mechanical Engineering, 2014, 27(3)558-566 (SCI IF:0.598/2014)Link
Cheng, J; Chen, MJ*; Liao, W; Wang, HJ ; Xiao, Y ; Li, MQ. Fabrication of spherical mitigation pit on KH2PO4 crystal by micro-milling and modeling of its induced light intensification. Optics Express, 2013, 21 (14): 16799-16813 (SCI IF: 3.488/2014)Link
Chen, MJ*; Li, MQ; Xiao, Y; Pang, QL. Study on the optical performance and characterization method of texture on KH2PO4 surface processed by single point diamond turning. Applied Surface Science, 2013, 279(8) 233-244 (SCI IF: 2.711/2014)Link
Chen, MJ*; Li, Z ; Yu, B; Peng, H ; Fang, Z. On-machine Precision Preparation and Dressing of Ball-headed Diamond Wheel for the Grinding of Fused Silica. Chinese Journal of Mechanical Engineering, 2013, 26(5) 982-987 (SCI IF: 0.598/2014)Link
Xiao, Y; Chen, MJ*; Tian, WL. Research on accuracy analysis and performance verification test of micro-precise five-axis machine tool. International Journal of Advanced Manufacturing Technology, 2013, Vol.67 (1-4) 387-395 (SCI IF: 1.458/2014)Link
Li, MQ ; Chen, MJ* ; Cheng, J; Xiao, Y; Jiang, W. Two important mechanisms damaging KH2PO4 crystal processed by ultraprecision fly cutting and their relationships with cutting parameters. Applied Optics, 2013 Vol.52 (15) 3451-3460 (SCI IF: 1.784/2014)Link
Chen, MJ*; Li, MQ ; An, CH ; Zhou, L ; Cheng, J ; Xiao, Y ; Jiang, W . Influence of Light Intensification by Subsurface Cracks on KH2PO4 Crystal's Laser Induced Damage Threshold. Japanese Journal of Applied physics, 2013, Vol.52 (3) 032701 (SCI IF: 1.127/2014)Link
Zheng, T ; Wu, CY ; Chen, MJ*. Early adsorption of collagen on the reduced rutile (110) surface mediated by water: A molecular dynamics study. Surface Science, 2013, 616 (10) : 51-59 (SCI IF: 1.925/2014)Link
Wu, CY; Chen, MJ*; Skelton, AA; Cummings, PT; Zheng, T. Adsorption of Arginine-Glycine-Aspartate Tripeptide onto Negatively Charged Rutile (110) Mediated by Cations: The Effect of Surface Hydroxylation. ACS Applied Materials & Interfaces, 5 (7): 2567-2579, 2013 (SCI IF: 6.723/2014)Link
Jiaxuan Chen, Yingchun Liang, Mingjun Chen*, Liquan Wang. Multi-Path Nanometric Cutting of Molecular Dynamics Simulation. Journal of Computational and Theoretical Nanoscience. 2012, 9(9SI): 1303-1308. (SCI IF: 1.343/2014)Link
Mingjun Chen*, Jian Cheng, Mingquan Li, Yong Xiao. Study of modulation property to incident laser by surface micro-defects on KH2PO4 crystal. Chinese Physics B. 2012, 21(6): 064212. (SCI IF: 1.603/2014)Link
Mingjun Chen*, Gaobo Xiao, Lihua Lu, Chunya Wu. Mechanism of Chip-Formation in Nanometric Cutting of Single-Crystal Copper by Molecular Dynamics. Journal of Computational and Theoretical Nanoscience. 2012, 9(1): 110-116. (SCI IF: 1.343/2014)Link
Mingjun Chen*, Haibo Ni, Zhijun Wang, Yan Jiang. Research on the modeling of burr formation process in micro-ball end milling operation on Ti-6Al-4V. International Journal of Advanced Manufacturing Technology. 2012, 62(9-12): 901-912. (SCI IF: 1.458/2014)Link
Mingquan Li, Mingjun Chen*, Chenhui An, Lian Zhou, Jian Cheng, Yong Xiao, Wei Jiang. Mechanism of micro-waviness induced KH2PO4 crystal laser damage and the corresponding vibration source. Chinese Physics B. 2012, 21(5): 050301. (SCI IF: 1.603/2014)Link
Wu, Chunya, Skelton, Adam A. , Chen, Mingjun*, Vlcek, Lukas, Cummings, Peter T. Modeling the interaction between integrin-binding peptide (RGD) and rutile surface: The effect of Na+ on peptide adsorption. Journal of Physical Chemistry C. 2011, 115(45): 22375-22386. (SCI IF: 4.772/2014)Link
Mingjun Chen*, Mingquan Li, Jian Cheng, Wei Jiang, Jian Wang, Qiao Xu. Study on characteristic parameters influencing laser-induced damage threshold of KH2PO4 crystal surface machined by single point diamond turning. JOURNAL OF APPLIED PHYSICS, 2011, 110: 113103. (SCI IF:2.183/2014)Link
Chen MJ*, Li MQ, Jiang W Xu QA. Influence of period and amplitude of microwaviness on KH 2 PO 4 crystal’s laser damage threshold[J]. Journal of Applied Physics. 2010. Vol. 108 (4) 043109. (SCI IF:2.183/2013)Link
Chen MingJun*, Xiao GaoBo, Chen JiaXuan, Wu ChunYa. Research on the influence of machining introduced sub-surface defects and residue stress upon the mechanical properties of single crystal copper. SCIENCE CHINA-TECHNOLOGICAL SCIENCES 2010, 53(12): 3161–3167. (SCI IF:1.192/2014)Link
C. Y. Wu, M. J. Chen*, X. Cheng. Molecular Understanding of conformational dynamics of a fibronectin module on rutile (110) surface. Langmuir. 2010, 26(20): 15972-15981. (SCI IF:4.457/2013)Link
D. P. Song, M. J. Chen*, Y. C. Liang, C. Y. Wu et al. Molecular dynamics simulation study on surface structure and surface energy of anatase. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. 2010, 18: 075002. (SCI IF:2.167/2014)Link
Chen Ming-jun*, Jiang Wei, Li Ming-quan, Chen kuan-nun. Study of the near-field modulation property of microwaviness on a KH2PO4 crystal surface. Chinese physics. 2010, 19(6): 064203. (SCI IF: 1.603/2014)Link
C. Y. Wu, M. J. Chen*, C. Q. Guo. Peptide-TiO2 interaction in aqueous solution: conformational dynamics of RGD using different water models. Journal of Physical Chemistry B. 2010, 114(13): 4692-4701. (SCI IF:3.377/2014)Link
Guo YB, Liang YC, Chen MJ*. Molecular dynamics simulation of thermal effects in nanometric cutting process. Sci China Tech Sci. 2010, 53(3): 870-874. (SCI IF:1.113/2013)Link
D. P. Song, M. J. Chen*, Y. C. Liang, Q. S. Bai, J. X. Chen, X. F. Zheng. Adsorption of tripeptide RGD on rutile TiO2 nanotopography surface in aqueous solution. Acta Biomaterialia. 2010, 6(2): 684-694. (SCI IF:6.792/2014)Link
Mingjun Chen*, Chunya Wu, Daiping Song, Kai Li. RGD tripeptide onto perfect and grooved rutile surfaces in aqueous solution: adsorption behaviors and dynamics. Physical Chemistry Chemical Physics. 2010, 12(2): 406-415. (SCI IF:4.198/2014)Link
Guo YB, Liang YC, Chen MJ*, Lu LH. Molecular dynamics simulations of nanomachining mechanism and thermal effects of single crystal Cu. Acta metallurgica sinica. 2009, 45(10):1199-1204. (SCI IF:0.540/2014)Link
Chen MJ*, Wu CY, Song DP, Dong WM, Li K. Effect of grooves on adsorption of RGD tripeptide onto rutile TiO2(110) surface. Journal of Materials Science-Materials in Medicine. 2009, 20(9): 1831-1838. (SCI IF:2.587/2014)Link
Liang YC, Chen JX, Chen MJ*, Song DP, Bai QS. Three-dimensional molecular dynamics simulation of nanostructure for reciprocating nanomachining process. Journal of Vacuum Science & Technology B. 2009, 27(3): 1536-1542. (SCI IF:1.464/2014)Link
Liang YC, Song DP, Chen MJ*, Bai QS. Adsorption mechanism of arg-gly-asp on rutile TiO2 (110) surface in aqueous solution. Journal of Vacuum Science & Technology B. 2009, 27(3): 1548-1554. (SCI IF:1.464/ 2014 )Link
Song, Dai-Ping; Liang, Ying- Chun; Chen, Ming-Jun*; Bai, Qing- Shun. Molecular dynamics study on surface structure and surface energy of rutile TiO2 (1 1 0). Applied Surface Science. 2009, 255(11): 5702-5708. (SCI IF:2.711/2014)Link
Pen Hongmin, Liang Yingchun, Bai Qingshun, Chen Mingjun*. Multiscale simulation of nanometric cutting of single crystal copper-effect of different cutting speeds. Acta Metallurgica Sinica-ENGLISH LETTERS. 2009, 22(6): 440-446. (SCI IF:0.727/2014)Link
Chen MJ*, Liang YC, Yuan YJ, et al. Deposition mechanism of nano-structured single-layered C-36 film on a diamond (100) crystal plane. Chinese Physics B. 2008, 17(11): 4260-4267. (SCI IF:1.603/2014)Link
Liang YC, Chen JX, Chen MJ*, et al. Integrated MD simulation of scratching and shearing of 3D nanostructure. Computational Materials Science. 2008, 43(4): 1130-1140. (SCI IF: 2.131/2014)Link
Liang YC, Chen JX, Bai QS, Tang YL, Chen MJ*. Molecular dynamics simulation of nanomachining process and mechanical properties of nanostructure. Acta Metallurgica Sinica. 2008, 44(8): 937-942. (SCI IF:0.540/2014)Link
Chen JX, Liang YC, Bai QS, Tang YL, Chen MJ*. Researching Nanometric Cutting of Copper Based on Molecular Dynamics. Journal of Computational and Theoretical Nanoscience. 2008, 5(8): 1485-1489. (SCI IF: 1.343/2014)Link
Chen MJ*, Pang QL, Wang JH, et al. Analysis of 3D microtopography in machined KDP crystal surfaces based on fractal and wavelet methods. International journal of machine tools and manufacture. 2008, 48(7-8): 905-913. (SCI IF:3.037/2014)Link
Chen MJ*, Liang YC, Yuan YJ, et al. Influential factors of low-energy C-36 cluster deposition on diamond (100) crystal planet. Chinese Journal of Chemical Physics. 2007, 20(6): 637-642. (SCI IF: 0.498/2014) Link
Liang YC, Chen JX, Chen MJ*, et al. Mechanical properties of machined nanostructures. Chinese Journal of Chemical Physics. 2007, 20(6): 649-654. (SCI IF:0.498/2014) Link
Chen MJ*, Wang JH, Liang YC, et al. Research on influence of the cutter rake angle to the surface quality during SPDT machining of crystal KDP. Key Engineering Materials, 2007, 339: 1-5. (SCI IF:0.224/2005) Link
Wang, JH; Dong, S; Wang, HX; Chen, MJ*; Zong, WJ; Zhang, LJ. Forecasting of surface roughness and cutting force in single point diamond turning for KDP crystal. KEY ENGINEERING MATERIALS 2006 Vol.339 78-83 (SCI IF:0.224/2005) Link
Chen MJ*, Liang YC, Li HZ, et al. Molecular dynamics simulation on mechanical property of carbon nanotube torsional deformation. Chinese Physics. 2006, 15(11): 2676-2681. (SCI IF:0.924/2012) Link
M. J. Chen*, Y. C. Liang, Wang, J. H., Dong, S. Research on influence of crystal KDP anisotropy on critical condition of brittle-ductile transition in ultra-precision cutting. Key Engineering Materials. 2006, 315-316: 725-730. (SCI IF:0.224/2005)Link
Y. C. Liang. M. J. Chen*. Machining simulation and experimental research of complex surface parts based on the PMAC. Key Engineering Materials. 2006, 315: 753-758. (SCI IF:0.224/2005)Link
M. J. Chen*, Q. L. Zhao, D. Li, S. Dong. The critical conditions of brittle-ductile transition and the factors influencing the surface quality of brittle materials in ultra-precision grinding. Journal of Materials Processing Technology. 2005, 168 (1): 75-82. (SCI IF:2.236/2014)Link
M. J. Chen*, Y. C. Liang, Y. S. Sun. Research of the Technological Parameters Influencing on the Surface Quality of Micro Complex Surface. Key Engineering Materials. 2005, 291-292: 513-518. (SCI IF:0.224/2005)Link
Q. L. Zhao, M. J. Chen*, Y. C. Liang, S. Dong, K. Cheng, Measurement and analysis of AFM-based nano-indentation on micro-machined silicon surface. Key Engineering Materials. 2004, 257-258: 39-44. (SCI IF:0.224/2005)Link
M. J. Chen*, S. Dong, D. Li, F. H. Zhang. Factors Influencing the Surface Quality During Ultra-precision Grinding of Brittle Materials in Ductile Mode. Key Engineering Materials. 2004, 257-258: 201-206. (SCI IF:0.224/2005)Link
J. Z. Zhang, D. Li,M. J. Chen*, S. Dong. An ultra-Low frequency parallel connection nonlinear isolator for precision instruments. Key Engineering Materials. 2004, 257-258: 231-236. (SCI IF:0.224/2005)Link
M. J. Chen*, D. Li, S. Dong, F. H. Zhang. Research on the Influence of The Diamond Wheel Wears on Machining Accuracy During Large Depth-to-Diameter Ratio Ultra-precision Aspheric Grinding Process. Key Engineering Materials. 2004, 259-261: 312-317. (SCI IF:0.224/2005)Link
M. J. Chen*, W. X. Guo, D. Li. Research of the complex surface algorithm based on recursive subdivision numeric control interpolation. Materials Science Forum. 2004, 471-472: 155-161. (SCI IF:0.339/2005)Link
Mingjun Chen*, Dan Li, Shen Dong. Research on a large depth-to-diameter ratio ultra-precision aspheric grinding system. Journal of Materials Processing Technology. 2002, 129(1-3): 91-95. (SCI IF: 2.236 /2014)Link
M. J. Chen*, Q. Zhao, S. Dong, D. Li. Development of an ultra-precision grinding system for machining optical aspheric components with a large depth diameter ratio. Proceeding of the institution of mechanical engineers Part B-Journal of Engineering Manufacture. 2002, 216(11): 1471-1480. (SCI IF: 0.954 /2014)Link
京公网安备 11010802027423号