近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Yanbo Pei, Meng Yuan, Enbo Wei, Menghua Yu, Bugang Teng. Effect of strain rate on dynamic recrystallization mechanism of Mg-Gd-Y-Sm-Zr alloy during hot compression. Journal of Materials Research and Technology, 2023,25:5038-5050
Yanbo Pei, Meng Yuan, Enbo Wei, Bugang Teng. Effects of Sm element addition on the workability and microstructure evolution of Mg-Gd-Y-Zr alloy during hot deformation. Materials & Design, 2023,230: 111962
Yanbo Pei，Yonggang Hao，Jie Zhao，Jiantong Yang，Bugang Teng. Texture evolution prediction of 2219 aluminum alloy sheet under hydro-bulging using cross-scale numerical modeling. Journal of Materials Science & Technology. 2023,149:190-204
Bugang Teng, Bing Li, Ji Wu and Erde Wang. Improved mechanical properties through elevated final rolling temperature and the fracture behavior of Mg-Gd-Y-Zn-Zr sheets during tension at elevated temperature. JOM; 2022，74(7):2541-2553
Bing Li, Ji Wu, Bugang Teng. Influences of the Texture Characteristic and Interdendritic LPSO Phase Distribution on the Tensile Properties of Mg–Gd–Y–Zn–Zr Sheets Through Hot Rolling. Acta Metallurgica Sinica (English Letters). 2021,34, 1051–1064
Xiao-Lei Cui, Bugang Teng, Shijian Yuan. Hydroforming process of complex T-shaped tubular parts of nickel-based superalloy. CIRP Journal of Manufacturing Science and Technology, 32 (2021) 476–490
Li Bing, Teng Bugang, Zhu Ziqing, Solid state recycling of Mg-Gd-Y-Zn-Zr alloy chips by spark plasma sintering, Journal of Magnesium and Alloys, 2020,8:1154-1165
Xueze Jin, Wenchen Xu, Zhongze Yang, Can Yuan, Debin Shan, Bugang Teng, Bo Cheng Jin, Analysis of abnormal texture formation and strengthening mechanism in an extruded Mg-Gd-Y-Zn-Zr alloy. Journal of Materials Science & Technology, 2020, 45: 133-145
Wu He, Xu Wenchen, Wang Sibing, Yang Zhongze, Chen Yu, Teng Bugang, Shan Debin, Guo Bin, A cellular automaton coupled FEA model for hot deformation behavior of AZ61 magnesium alloys, Journal of Alloys and Compounds, 2020, 816:152562
Li Bing, Teng Bugang, Zhang Baoting, Integrated Extrusion-Shear forming process of the solid state recycled AZ80 magnesium alloy via hot press sintering, Acta Metallugrical Sinica (English letter), 2020, 33(3):351-361
Bing Li, Bugang Teng, Erde Wang.Effects of accumulative rolling reduction on the microstructure characteristic and mechanical properties of Mg-Gd-Y-Zn-Zr sheets processed by hot rolling. Materials Science & Engineering A,765 (2019) 138317
Bing Li, Xiangwu Hou, Bugang Teng. Effects of friction stir process and subsequent aging treatment on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy. Materials Characterization，155(2019)：109832
Bing Li，Bugang Teng，Wenchen Xu. Hot deformation characterization of homogenized Mg-Gd-Y-Zn-Zr alloy during isothermal compression;JOM;2019，71 ( 11) : 4059 -4070
滕步刚，李丙，陈冠希， 徐文臣;挤压温度及路径对Mg-Gd-Y-Zn-Zr 合金等通道角挤压组织及性能影响;塑性工程学报;2019;26(2)，28-36
Bing Li, Bugang Teng, Guanxi Chen;Microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy during equal channel angular pressing;Materials Science & Engineering A;2019;744，396-405
Bing Li, Bu-Gang Teng, De-Gao Luo;Effects of Passes on Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy During Multidirectional Forging.;Acta Metallurgica Sinica (English Letters) ;2018;31(10),1009-1018
Bugang Teng, Weinian Wang, Yongchao Xu;Ductile fracture prediction in aluminium alloy 5A06 sheet forming based on GTN damage model;Engineering Fracture Mechanics;2017;186，242-254
彭俊阳，罗德高，滕步刚，刘钢 薄壁Y 型三通管内高压成形起皱与开裂分析 材料科学与工艺 25（4）2017:11-16
张伟玮， 滕步刚;椭球壳液压胀形过程焊缝建模方式的研究;材料工程;201703;45(3),60-65
Liu Gang， Peng Junyang， Yuan, Shijian，Teng Bugang， Li Kai. Analysis on critical conditions of sidewall wrinkling for hydroforming of thin-walled Tee-joint. International Journal of Machine Tools and Manufacture, v 97, p 42-49, July 18, 2015
Yuan, S. J.，Zhang, W. W.，Teng, B. G.. Research on hydro-forming of combined ellipsoidal shells with two axis length ratios . JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 2015，219:124-132
Wencai Xie, Bugang Teng, ShijianYuan. Deformation analysis of hydro-bending of bi-layered metal tubes. Int J Adv Manuf Technol (2015) 79:211–219
Wei-wei Zhang，Bu-gang Teng，Shi-jian Yuan. Research on deformation and stress in hydroforming process of an ellipsoidal shell without constraint. Int J Adv Manuf Technol (2015) 76:1555–1562
Buang Teng, Weinian Wang, Yinquan Liu, Shijian Yuan. Bursting prediction of hydroforming aluminium alloy tube based on Gurson-Tvergaard-Needleman damage model. Procedia Engineering 81 ( 2014 ) 2211- 2216
Bugang Teng，Kai Li， Shijian Yuan. Optimization of loading path in hydroforming T-shape using fuzzy control algorithm. Int J Adv Manuf Technol Volume 69, Issue 5-8, November 2013：Pages 1079-1086
B. G. Teng, L. Hu and S. J. Yuan. Deformation Behavior of Thin-Walled Tubes Bending with Internal Pressure. Reviews on Advanced Materials Science. No 5, Vol. 33, 2013：436-441
Bugang Teng, Gang Liu and Shijian Yuan. Effect of end angle of counterpunch on Y-shape hydroforming. Advanced Materials Research Vols. 753-755 (2013)：1539-1542
TENG Bu-gang, YUAN Shi-jian, CHEN Zeng-tao, JIN Xue-run. Plastic damage of T-shape hydroforming. Trans. Nonferrous Met. Soc. China. 22(2012)： s294？s301
L．Hu, B.G.Teng, S.J.Yuan.Effect of internal pressure on hydro bending of double-layered tube. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture October 2012 vol. 226 no. 10: 1717-1726
TENG Bu-gang, HU Lan, LIU Gang, YUAN Shi-jian. Wrinkling behavior of hydro bending of carbon steel/Al-alloy bi-layered tubes. Trans. Nonferrous Met. Soc. China. 22(2012)： s560？s565
Wang, Jiangchao, Ma, Ninshu, Murakawa, Teng, Bugang, Yuan, Shijian. Prediction and measurement of welding distortion of a spherical structure assembled from multi thin plates. MATERIALS & DESIGN. 32(10) (2011): 4728-4737
胡蓝，滕步刚，何祝斌，初冠南，王仲仁. 用中心管限位的椭球壳无模液压成形试验研究. 压力容器，2011，28（4）：1-6
苑世剑，滕步刚，王仲仁，张琦，董国庆，李周复. 大型低速增压风洞制造关键技术与成形机理.数字制造科学，2009，7（2）：29-56
Bugang Teng, Shijian Yuan and Zhongren Wang. Manufacture of a seal flange with E-cross-section. Advanced Materials Research. 2010，Vols. 97-101：328-331
Zhubin He, Bugang Teng, Shijian Yuan and Z.R. Wang. A study on the bending of a trough-shaped profile using a roller and PUR pad. Int. J. Materials and Product Technology, Vol. 38, Nos. 2/3, 2010:287-296
D.M. CHENG, B.G. TENG, B. GUO, S.J. YUAN Thickness Distribution of a Hydroformed Y-shape Tube. Materials Science & Engineering A. ，2009，499（1）：36-39
刘泽宇，滕步刚，苑世剑. 内压对薄壁管充液压弯时的影响. 塑性工程学报， 2009，16（4）：35-38
滕步刚,程东明,郭斌, 苑世剑. 轴向补料比对Y型三通管内高压成形壁厚分布规律影响研究. 锻压技术. 2008，133（5）：34-37
CHENG Dong-ming, TENG Bu-gang, GUO Bin, YUAN Shi-jian Analysis of deformation and defects in hydroforming of Y-shaped tubes. Journal of Harbin Institute of Technology，2008，4，15（2）：206-210
程东明, 滕步刚, 郭斌, 苑世剑. Y型三通管内高压成形壁厚分布规律. 材料科学与工艺，2007，12，15（6）：750-753
Shijian Yuan, Bugang Teng New Manufacturing technologies for wind tunnels and ultra-large vessels. International Conference on Applied Production Technology Bremen, Germany, 2007. 19-29
滕步刚，苑世剑. 新成形工艺在风洞建造中的应用. 焊接技术 2007，36：85-87
滕步刚，刘钢，苑世剑，苑文婧，杨华. 汽车发动机排气歧管的内高压成形技术. 塑性工程学报 2007，14（3）:88-92
滕步刚，苑世剑，王仲仁，刘元君. 大型密封法兰弯曲成形工艺研究. 中国机械工程. 2006，17（19）:2046-2048
刘强， 张琦，滕步刚，苗启斌，王仲仁. 近足球形封闭壳体无模液压胀形的实验研究. 锻压技术 2006，4:27-30
王仲仁，董国庆，滕步刚，张琦，苑世剑，沈济全. 多点“三明治”成形及其在风洞收缩段形体制造中的应用，航空学报，2006，27（5）989-992
Gang Liu，ShijianYuan，Bugang Teng. Analysis of thining at the transition corner in tube hydroforming. Journal of Materials Processing Technology. 2006, 177,: 688-691
滕步刚，苑世剑，王仲仁. 球形容器解决方案：整体无模液压胀形技术 锻造与冲压 2006，6：34-38
Shijian Yuan, Bugang Teng, Z.R.Wang.Precision forming of flange for large special vessel. Journal of Materials Processing Technology. 2005,167:224-229
滕步刚，苑世剑，王仲仁. 大型法兰加工制造工艺的研究 塑性工程学报2005，12 (52)：77-80
Zhubin He, Z.R.Wang, Bugang. Teng, A graphic representation of traction for a 3D elastic/plastic stress state, International Journal of Mechanical Engineering Education, 2004, Vol.32, Issue.2 153-159
S.J.Yuan B.G. Teng X.Y.Dong R.W.Wang. Progress in large vessel forming——Introduction of some innovations of Prof. Z.R.Wang. Journal of Materials Processing Technology. 2004,151:12-17
B.G. Teng, Z.R.Wang, G.Q. DONG, J.Q. SHEN Research on precision bending of a workpiece with a complicated cross-section for manufacturing a large flange. Journal of Materials Processing Technology. 2004,151:228-231
He, ZB, Wang, ZR, Teng, BG Three-dimensional representation of normal stress magnitude with applications to hydrobulge forming. Journal of Strain Analysis for Engineering Design, 2004, Vol.39, No.2 205-211
Z.R.Wang, B.G. Teng, S.J. Yuan, L.H.Lang, Z.J.Wang. Simulation of Some Cases of Hydroforming and Viscous Pressure Forming. Journal of Materials Processing Technology. 2004,150:25-29
苑世剑，滕步刚．无模液压胀形技术． 塑性工程学报． 2004，(2)：9-20
滕步刚，王长文，王仲仁．等边双圆锥台壳体内环约束胀形的实验研究．锻压技术．2004,29(2):33-35
滕步刚，王长文，王仲仁．锥台式壳体胀球时壳体的结构形式．金属成形工艺．2003,21(6):65-67
滕步刚，苗启斌，董小瑛，王仲仁，董国庆，沈济全．特大型法兰用复杂截面工件精密弯曲成形的工艺．压力容器．2003，20（10）：37-39
滕步刚，王长文，王仲仁．薄壁半球件无模液压胀形的实验研究．压力容器．2003，20（5）：23-25
Bugang Teng, Shijian Yuan, Z.R.Wang. Effect of the Initial Structure on Hydro-Forming of Toroidal Shells. Journal of Materials Processing Technology. 2002，123:18-21
Z.R.Wang, B.G. Teng, S.J. Yuan. Study on Occurring and Preventing Wrinkle during Integral Hydor-Bulge Foming. Proceedings of the 7thICTP, Yokohama, 2002, Japan
Z.R.Wang, B.G. Teng, S.J. Yuan, L.H.Lang, Z.J.Wang. Numerical Simulation of Hydroforming and Viscous Pressure Forming Process. Advances in Concurrent Engineering of the 9th ISPE/CE2002:221-22
何祝斌，滕步刚，苑世剑，王仲仁．管材轴压液力成形中的摩擦与润滑．锻压技术．2001,26(3):4-6
滕步刚，苑世剑，王仲仁．等边双圆锥台壳体端部约束胀形的实验研究．金属成形工艺．2001,19(4):4-6
滕步刚，苑世剑，王仲仁．不同初始结构环壳液压成形的理论分析与数值模拟．中国机械工程．2001,12(12):1405-1407
滕步刚，苑世剑，王仲仁．环壳初始结构对其液压胀形过程的影响．压力容器．2000，（1）：13-16
Shijian Yuan, Bugang Teng, Z.R.Wang. A New Hydroforming Process for Large Elbow Pipes. Journal of Materials Processing Technology. 2001,117:28-31
Zhenxiu Hou, Bugang Teng, Jun Lu, Zhubin He, Zhongren Wang. An Experimental Study of Bulge-Forming Polycarbonate (PC) Semisphere Shell Parts. Journal of Materials Science and Technology. 2001,17(1):157
Bugang Teng, Shijian Yuan, Z.R.Wang. Experiment and Numerical Simulation of Hydro-forming Toroidal Shells with Different Initial Structure. International Journal of Pressure Vessels and Piping. 2001,78(1):31-34
京公网安备 11010802027423号