近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
2022
Du R., Zhang X., Wang H., Liu X.*, Wei Y., (2022) “A revised Chaboche model from multiscale approach to predict the cyclic behavior of type 316 stainless steel at room temperature.” International Journal of Fatigue, accepted.
Zhang M., Yu Q., Wang H.*, Zhang J., Wang F., Zhang Y., Xu D., Liu Z., Zhang Z.F., Ritchie R.O., (2022) “Phase-transforming Ag-NiTi 3-D interpenetrating-phase composite with high recoverable strain, strength and electrical conductivity.” Applied Materials Today 29, 101639
Qiao H., Fu Y., Sun X.C., Wang H.*, Li D.Y., Peng Y.H., Wu P.D., (2022) “Modeling the micromechanical behaviors of Zircaloy-2 alloy under large deformation.” Journal of Nuclear Materials 569, 153912.
Zhao L.L., Zhou K.C, Tang D., Wang H.*, Wu P.D., Li D.Y., Peng Y.H., (2022) “An improved mechanism-based strain gradient plasticity model and its application to study size effect under various loading mode.” International Journal of Applied Mechanics 13, 2250041.
Wang D., Dai W., Tang D., Liang Y., Ouyang J., Wang H., Peng Y., (2022) “Deep learning approach for bubble segmentation from hysteroscopic images.” Medical & Biological Engineering & Computing, 1-14.
Dai W., Li D, Zheng Y., Wang D., Tang D., Wang H., Peng Y., (2022) “Online quality inspection of resistance spot welding for automotive production lines.” Journal of Manufacturing Systems 63, 354-369.
Zhao L.L., Zhou K.C., Tang D., Wang H., Li D.Y., Peng Y.H., (2022) “Experimental and numerical study on friction and wear performance of hot extrusion die materials.” Materials 15(5), 1798.
Jiang W.C., Wan Y., Tu S.T., Wang H., Huang Y.L., Xie X.F., Li J., Sun G.A., Woo W.C., (2022). “Determination of the through-thickness residual stress in thick duplex stainless steel welded plate by wavelength-dependent neutron diffraction method.” International Journal of Pressure Vessels and Piping, 196(33):104603.
J73 Dai W., Li D.Y., Tang D., Wang H., Peng Y.H., (2022) “Deep learning approach for defective spot welds classification using small and class-imbalanced datasets.” Neurocomputing 477, 46-60.
Yang H., Wang H., Li D.Y., (2021) “Crystal plasticity modeling of tension process of QP980 steel.” Journal of Shanghai Jiaotong University 55, 1476-1482.
Wang H.*, Zhang X., Wu W., Liaw P.K., An K., Yu Q., Wu P.D., (2022) “On the torsional and coupled torsion-tension/compression behavior of a magnesium alloy solid rod: a crystal plasticity evaluation.” International Journal of Plasticity 151, 103213.
Tang D., Zhou K.C., Tang W.Q., Wu P.D., Wang H.*, (2022) “On the inhomogeneous deformation behavior of magnesium alloy beam subjected to bending.” International Journal of Plasticity 150, 103180.
Sun Y., Zhou K., Qiao H., Xin R., Wang H.*, Wu P., (2022) “Crystal plasticity-based finite element modeling of twin transmission across grain boundaries in magnesium.” Materials Today Communication, 30, 102998.
Zhu X., Wang Y., Carneiro L., Wang H., Jiang Y., (2021) “An experimental evaluation of elastic-viscoplastic self-consistent models for a rolled magnesium alloy under monotonic loading along different material orientations.” Journal of Magnesium Alloys, accepted.
2021
Toursangsaraki M., Li Q., Hu Y., Wang H., Zhao D., Zhao Y., (2021) “Crystal plasticity modeling for mechanical property prediction of AA2195-T6 friction stir welded joints.” Materials Science and Engineering: A823, 141677.
He Q.C., Zhang X.D., Qiao H., Wang H.*, Wu P.D., (2021) “Modeling the effect of pre-straining on mechanical behavior of magnesium alloy sheet.” Applied Physics A, 127, 615.
Wang H., Sun X., Kurukuri S., Worswick M.J., Li D.Y., Peng Y.H., Wu P.D., (2021) “Strain rate sensitive and anisotropic behavior of rare-earth magnesium alloy ZEK100 sheet.” Journal of Magnesium Alloys, Accepted.
Hou Y.N., Yang K.M., Song J., Wang H.*, Liu Y., Fan T.X., (2021) “A crystal plasticity model for metal matrix composites considering thermal mismatch stress induced dislocations and twins.” Scientific Reports, 11, 16053.
Zhang Q., Sun X.C., Zheng W., Wan Q., Liu M., Liao X., Hagio T., Ichino R., Kong L., Wang H., Li L., (2021) “Band Gap Engineering toward Wavelength Tunable CsPbBr3 Nanocrystals for Achieving Rec. 2020 Displays.” Chemistry of Materials, 33, 3575–3584.
Dai W., Wang H.*,Guan Q., Li D., Peng Y., Tomé C.N., (2021) “Studying the micromechanical behaviors of a polycrystalline metal by artificial neural networks.” Acta Materialia, 214, 117006.
Zhu G., Wang L., Sun Y., Shang X., Wang J., Wang H.*, Zeng X.Q., (2021) “Grain-size effect on the deformation of Mg−3Al−3Sn alloy: Experiments and elastic-viscoplastic self-consistent modeling.” International Journal of Plasticity, 143, 103018.
Toursangsaraki M., Wang H., Hu Y., Karthik D., (2021) “Crystal plasticity modeling of laser peening effects on tensile and high cycle fatigue properties of 2024-T351 aluminum alloy.” Journal of Manufacturing Science and Engineering 143: 071015.
Feng R., Rao Y., Liu C., Xie X., Yu D., Chen Y., Ghazisaeidi M., Ungar T., Wang H., An K., Liaw P., (2021) “Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy.” Nature Communications, Accepted.
Tang D., Zhao L.L., Wang H.*, Li D.Y., Peng Y.H., Wu P.D., (2021) “The role of rough surface in the size-dependent behavior upon nano-indentation.” Mechanics of Materials, Accepted.
Sun X., Zhang B., Jiang Y.D., Wu P.D., Wang H.*, (2021) “A multi-island genetic algorithm-based approach to uniquely calibrate polycrystal plasticity models for magnesium alloys.” JOM, accepted.
Liu M.#, Wan Q.#, Wang H.#, Carulli F., Sun X., Zheng W., Kong L., Zhang Q., Zhang C., Zhang Q., Brovelli S., Li L., (2021) “Suppression of temperature quenching in perovskite nanocrystals for highly efficient and thermally stable light emitting diodes.” Nature Photonics, accepted.
Dai W., Li D., Tang D., Jiang Q., Wang D., Wang H., Peng Y., (2021) “Deep learning assisted vision inspection of resistance spot welds.” Journal of Manufacturing Processes 62, 262-274.
Zhang X.D., Li S.M., Guo X.Q., Wang H.*, Yu Q., Wu P.D., (2021) “Effects of texture and twinning on the torsional behavior of magnesium alloy solid rod: a crystalplasticity approach in comparison with uniaxial tension/compression.” International Journal of Mechanical Sciences 191, 106062.
Zhang Y., Proust G., Retraint D., Wang H., Gan Y., (2021) “Predicting mechanical properties of 316L stainless steel subjected to SMAT: A sequential DEM-FEM investigation.” International Journal of Mechanical Sciences 193, 106173.
2020
Yang H., Wang H., Yang Z., Huang Y., Li D.Y., Peng Y.H., Wu P.D., (2020) “In situ neutron diffraction and crystal plasticity analysis on Q&P1180 steel during plastic deformation.” Materials Science and Engineering A 140425.
Li Z., Zhou G., Li D., Wang H., Tang W., Peng Y., Zurob H., Wu P., (2020) “Crystal plasticity based modeling of grain boundary sliding in magnesium alloy AZ31B sheet.” Tansactions of Nonferrous Metals Society of China. Accepted.
Tang W., Shao Y., Li D.Y., Peng Y., Wang H., (2020) “On the role of Yttrium in the microstructure evolution and texture modification during the magnesium alloy extrusion.” Materials Characterization 162, 110189.
Tang W., Lee J.Y., Wang H.*, Steglich D., Li D.Y., Peng Y., Wu P.D., (2020) “Unloading behaviors of rare-earth magnesium alloy ZE10 sheet.” Journal of Magnesium and Alloys, accepted.
Wang H., Lee S.Y., Huang E-W., Jain J., Li D.Y., Peng Y.H., Choi H.S., Wu P.D., (2020) “Crystal plasticity modeling and in-situ neutron diffraction measurement of magnesium alloy AZ31B plate: effects of plastic anisotropy and surrounding grains.” Journal of the Mechanics and Physics of Solids 135, 103795.
Wang Y., Li S., Yang B., Liu Z., Zhong H., Xing H., Wang H., (2020) “Non-axially oriented dendritic microstructures and their mechanical characteristics of single-crystal Al-Cu alloy.” Materials Science and Engineering A 771, 138665.
Wang H., Lee S.Y., Wang H., Woo W., Huang E-W., Jain J., An K., (2020) “On plastic anisotropy and deformation history-driven anelasticity of an extruded magnesium alloy.” Scripta Materialia 176, 36–41.
Fang W., Tang D., Wang H., Li D.Y., Peng Y.H., (2020) “Optimization of die design for thin-walled flat multi-port tube with the aid of finite element simulation.” Journal of Materials Processing Technology 277, 116418.
Tang W., Shao Y., Li D.Y., Peng Y., Wang H., (2020) “On the role of Yttrium in the microstructure evolution and texture modification during the magnesium alloy extrusion.” Materials Characterization 162, 110189.
Tang W., Lee J.Y., Wang H.*, Steglich D., Li D.Y., Peng Y., Wu P.D., (2020) “Unloading behaviors of rare-earth magnesium alloy ZE10 sheet.” Journal of Magnesium and Alloys, accepted.
Wang H., Lee S.Y., Huang E-W., Jain J., Li D.Y., Peng Y.H., Choi H.S., Wu P.D., (2020) “Crystal plasticity modeling and in-situ neutron diffraction measurement of magnesium alloy AZ31B plate: effects of plastic anisotropy and surrounding grains.” Journal of the Mechanics and Physics of Solids 135, 103795.
Wang Y., Li S., Yang B., Liu Z., Zhong H., Xing H., Wang H., (2020) “Non-axially oriented dendritic microstructures and their mechanical characteristics of single-crystal Al-Cu alloy.” Materials Science and Engineering A, 138665.
Wang H., Lee S.Y., Wang H., Woo W., Huang E-W., Jain J., An K., (2020) “On plastic anisotropy and deformation history-driven anelasticity of an extruded magnesium alloy.” Scripta Materialia 176, 36–41.
2019
Wang H.*, Li S., Li D.Y., Proust G., Gan Y., Yan K., Tang D., Wu P.D., Peng Y.H., (2019) “Modeling twinning, detwinning and dynamic recrystallization of magnesium alloys.” MRS Bulletin, 44, 873-877.
Zhang Y., Proust G., Retraint D., Wang H., Gan Y., (2019) “Discrete element simulation of surface mechanical attrition treatment with rough-surface sonotrode.” International Journal of Mechanical Science, 161-162, 105060.
Xin R., Liu Z., Sun Y., Wang H., Guo C., Ren W.J., Liu Q., (2019) “Understanding common grain boundary twins in Mg alloys by a composite Schmid factor.” International Journal of Plasticity 123, 208-223.
Chae H., Huang E.-W., Jain J., Wang H., Woo W., Chen S.W., Harjo S., Kawasaki T., Lee S.Y., (2019) “Plastic anisotropy and deformation-induced phase transformation of additive manufactured stainless steel.” Materials Science and Engineering A 762, 138065.
Bo Zhang, Huamiao Wang *, Weiqin Tang, Yaodong Jiang, Peidong Wu. Investigation of the in-plane mechanical anisotropy of magnesium alloy AZ31B-O by VPSC-TDT crystal plasticity model. Materials, 12,16.
Tang D., Zhao L., Zou T., Wang H.*, Li D.Y., Peng Y.H., Wu P.D., (2019) “Study on the pressure bearing capability of folded multi-port flat tube.” Materials, 12:3744.
Ma C., Wang H.*, Hama T., Guo X.Q., Mao X.B., Wang J., Wu P.D., (2019) “Twinning and detwinning behaviors of commercially pure titanium sheets.” International Journal of Plasticity 121, 261-279.
Ding Tang, Wenli Fang, Xiaohui Fan, Tianxia Zou, Zihan Li, Huamiao Wang*, Dayong Li, Yinghong Peng, Peidong Wu. Evolution of the Material Microstructures and Mechanical Properties of A1100 Aluminum Alloy within a Complex Porthole Die during Extrusion. Materials, 12, 00016.
Xiaoqian Guo, Chao Ma, Huamiao Wang*, Xian-Biao Mao, Peidong Wu, Numerical study of large strain behavior of OFHC copper: The role of latent hardening. Materials Science and Engineering A 744 386-395.
Tang T., Zhou G., Li Z., Li D., Peng L., Peng Y., Wu P.D., Wang H., Lee M.-G., (2019) “A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys.” International Journal of Plasticity 116, 159-191.
2018
Wang H., Tang D., Li D.Y., Peng Y.H., Wu P.D. Modelling the effects of detwinning on the inelasticity of AZ31B sheets during unloading. International Journal of Applied Mechanics 10, 1850095.
Tang Ding, Fan Xiaohui, Fang Wenli, Li Dayong, Peng Yinghong, Wang Huamiao*. Microstructure and Mechanical Properties Development of Micro-Channel Tubes by Extrusion, Rolling and Brazing. Materials Characterization 142, 449-457.
Leyun Wang*, Zhonghe Huang, Huamiao Wang, Alireza Maldar, Sangbong Yi, Jun-Sang Park, Peter Kenesei, Erica Lilleodden, Xiaoqin Zeng*. Study of slip activity in a Mg-Y alloy by in situ high energy X-ray diffraction microscopy and elastic viscoplastic self-consistent modeling. Acta Materialia 155, 138-152.
Guowei Zhou; Zihan Li; Yinghong Peng*; Dayong Li*, Huamiao Wang; Peidong Wu. Misorientation Development in Continuous Dynamic Recrystallization of AZ31B Alloy Sheet and Polycrystal Plasticity Simulation. Materials Science and Engineering A, 730, 438-456.
Wang H., Wu P.D., Kurukuri S., Worswick M.J., Peng Y.H., Tang D., Li D.Y.* (2018) “Strain rate sensitivities of different deformation mechanisms of magnesium alloys.” International Journal of Plasticity 107, 207-222.
to 2017
Wang H.*, Capolungo L., Clausen B., Tomé C.N. (2017) “A crystal plasticity model based on transition state theory.” International Journal of Plasticity 93, 251-268.
Wang H.*, Lee S.Y., Gharghouri M.A., Wu P.D. (2016) “Deformation behavior of Mg-8.5wt.%Al alloy under reverse loading investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent modeling.” Acta Materialia 107, 404-414.
Wang H.*, Jeong Y., Clausen B., Liu Y., McCabe R.J., Barlat F., Tomé C.N. (2016) “Effect of martensitic phase transformation on the behavior of 304 austenitic stainless steel under tension.” Materials Science and Engineering A 649, 174-183.
Wang H.*, Clausen B., Capolungo L., Beyerlein I.J., Wang J. & Tomé C.N. (2016) “Stress and strain relaxation in magnesium AZ31 rolled plate: in-situ neutron measurement and elastic viscoplastic polycrystal modeling.” International Journal of Plasticity 79, 275-292.
Guo X.Q., Wu P.D., Wang H., Mao X.B., Neale K.W., (2016) “Study of large strain behavior of ofhc copper: the role of polycrystal plasticity model.” International Journal of Solids and Structures 90, 12-21.
Qiao H., Wu P.D., Wang H., Gharghouri M.A. & Daymond M.R. (2015) “Evaluation of elastic-viscoplastic self-consistent polycrystal plasticity models for zirconium alloys.” International Journal of Solids and Structures 71, 308-322.
Guo X.Q., Wang H.*, Wu P.D. & Mao X.B. (2015) “Analysis of reversed torsion of FCC metals using polycrystal plasticity models.” International Journal of Applied Mechanics 7, article 1550033.
Guo X.Q., Wu P.D., Wang H. & Mao X.B. (2015) “Study of lattice strain evolution in stainless steel under tension: The role of self-consistent plasticity model.” Steel Research International 86, 894-901.
Lee S.Y., Wang H. & Gharghouri M.A. (2015) “Twinning-detwinning behavior during cyclic deformation of magnesium alloy.” Metals 5, 881-890.
Wang H.*, Wu P.D. & Wang J. (2015) “Numerical assessment of the role of slip and twinning in magnesium alloy AZ31B during loading path reversal.” Metallurgical and Materials Transactions 46A, 3079-3090.
Guo X.Q., Wang H.*, Qiao H. & Mao X.B. (2015) “Numerical study of the large strain behavior of extruded magnesium alloy AM30 tube by elastic viscoplastic self-consistent model.” Materials & Design 79, 99-105.
Wang H.*, Wu P.D., Lee S.Y., Wang J. & Neale K.W. (2015) “The effects of shear deformation and superimposed hydrostatic pressure on the formability of AZ31B sheet at room temperature.” International Journal of Mechanical Sciences 92, 70-79.
Wang H.*, Wu P.D. & Wang J. (2015) “Modelling the role of slips and twins in magnesium alloys under cyclic shear.” Computational Materials Science 96, 214-218.
Li N., Wang H., Misra A. & Wang J. (2014) “In situ nanoindentation study of plastic co-deformation in Al-TiN nanocomposites.” Scientific Reports 4, article 6633.
Lee S.Y., Wang H., Gharghouri M.A., Nayyeri G., Woo W., Shin E., Wu P.D., Poole W.J., Wu W. & An K. (2014) “Deformation behavior of solid-solution-strengthened Mg-9wt%Al alloy: in-situ neutron diffraction and elastic viscoplastic self-consistent modeling.” Acta Materialia 73, 139-148.
Wang H., Wu P.D. & Wang J. (2013) “Modeling inelastic behavior of magnesium alloys during cyclic loading–unloading.” International Journal of Plasticity 47, 49-64.
Wang H.*, Wu P.D., Wang J. & Tomé C.N. (2013) “A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms.” International Journal of Plasticity 49, 36-52.
Wang H., Clausen B., Tomé C.N. & Wu P.D. (2013) “Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tension.” Acta Materialia 61, 1179-1188.
Wu P.D., Wang H. & Neale K.W. (2012) “On the large strain torsion of HCP polycrystals.” International Journal of Applied Mechanics 4, article 1250024.
Wang H., Wu P.D., Tomé C.N. & Wang J. (2012) “A constitutive model of twinning and detwinning for HCP polycrystals.” Materials Science and Engineering A555, 93-98.
Wang H., Wu P.D., Tomé C.N. & Wang J. (2012) “Study of lattice strains in magnesium alloy AZ31 based on a large strain elastic-viscoplastic self-consistent polycrystal model.” International Journal of Solids and Structures 49, 2155-2167.
Wang H., Wu P.D. & Neale K.W. (2012): “Length changes in extruded magnesium alloy bars under large strain free-end torsion.” Magnesium Technology 2012, 111-116.
Wang H., Wu P.D., Boyle K.P. & Neale K.W. (2011) “On crystal plasticity formability analysis for magnesium alloy sheets.” International Journal of Solids and Structures 48, 1000-1010.
Wang H., Wu Y., Wu P.D. & Neale K.W. (2010) “Numerical analysis of large strain simple shear and fixed-end torsion of HCP polycrystals.” CMC-Computers, Materials & Continua 19, 255-284.
Wang H., Wu P.D. & Neale K.W. (2010) “On the role of the constitutive model and basal texture on the mechanical behavior of magnesium alloy AZ31B sheet.” Journal of Zhejiang University-Science A11, 744-755.
Wang H., Raeisinia B., Wu P.D., Agnew S.R. & Tomé C.N. (2010) “Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet.” International Journal of Solids and Structures 47, 2905-2917.
Wang H., Wu P.D. & Gharghouri M.A. (2010) “Effect of basal texture on mechanical behaviour of magnesium alloy AZ31 Sheet.” Materials Science and Engineering A527, 3588-3594. (IF=3.094)
Wang H., Wu P.D., Tomé C.N. & Huang Y. (2010) “A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials.” Journal of the Mechanics and Physics of Solids 58, 594-612.
Wang H., Hwang K.C., Huang Y., Wu P.D., Liu B., Ravichandran G., Han C.S. & Gao H. (2007) "A conventional theory of strain gradient crystal plasticity based on the Taylor dislocation model." International Journal of Plasticity 23, 1540-1554.
Huang S.H. & Wang H. (2004) "Electro-elastic fields arising near circular electrode border on piezoelectric medium surface." Chinese Journal of Applied Mechanics 21, 106-109.
京公网安备 11010802027423号