近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[42] Man-Tai Chen*, Wenkang Zuo, Ben Young. (2023), “Tests of cold-formed steel T-joints with semi-oval hollow section chord.” Journal of Structural Engineering, ASCE, (In press). (交大A档SCI)
[41] Man-Tai Chen*, Tianyi Zhang, Ben Young. (2023), “Behavior of concrete-filled cold-formed steel built-up section stub columns.” Thin-walled Structures, 187: 110692. (交大A档SCI)
[40] Man-Tai Chen*, Yangyu Chen, Ben Young. (2023), “Experimental investigation on cold-formed steel elliptical hollow section T-joints.” Engineering Structures, 283: 115593. (交大A档SCI)
[39] Man-Tai Chen, Ao Cai, Madhup Pandey, Chen Shen, Yuelong Zhang, Lili Hu*. (2023), “Mechanical properties of high strength steels and weld metals at arctic low temperatures.” Thin-walled Structures, 185: 110543. (交大A档SCI)
[38] Shusheng Yi, Man-Tai Chen*, Ben Young. (2023), “Stub column behavior of concrete-filled cold-formed steel semi-oval sections.” Journal of Structural Engineering, ASCE, 149(3): 04023001. (交大A档SCI)
[37] Shusheng Yi, Man-Tai Chen*, Ben Young. (2023), “Design of concrete-filled cold-formed steel elliptical stub columns.” Engineering Structures, 276: 115269. (交大A档SCI)
[36] Xuan Li, Rui Wang, Hui Zhao*, Man-Tai Chen, Dennis Lam. (2023), “Bond behaviour of round-ended recycled aggregate concrete filled steel tube (RE-RACFST) columns.” Journal of Constructional Steel Research, 201: 107700. (交大B档SCI)
[35] André Dias Martins, Dinar Camotim*, Pedro Borges Dinis, Man-Tai Chen, Ben Young. (2022), “Local-Distortional Interaction in CFS Lipped Channel Beams: Experimental Investigation.” Steel Construction, 15: 1-10.
[34] André Dias Martins, Dinar Camotim*, Pedro Borges Dinis, Man-Tai Chen, Ben Young. (2022), “Design approach against column local-distortional interactive failures based on the Direct Strength Method.” Thin-walled Structures, 181: 110081. (交大A档SCI)
[33] Man-Tai Chen, Madhup Pandey*, Ben Young. (2021), “Mechanical properties of cold-formed steel semi-oval hollow sections after ISO-834 fire.” Thin-walled Structures, 167: 108202. (交大A档SCI)
[32] Bin Cheng, Fenghua Huang, Yinghao Duan, Man-Tai Chen*. (2021), “Fatigue performance of bird-beak SHS gap K-joints under brace in-plane force.” Journal of Structural Engineering, ASCE, 147(11): 04021167. (交大A档SCI)
[31] Man-Tai Chen*, Ben Young. (2021), “Numerical analysis and design of cold-formed steel elliptical hollow sections under combined compression and bending.” Engineering Structures, 241: 112417. (交大A档SCI)
[30] Man-Tai Chen, Madhup Pandey*, Ben Young. (2021), “Post-fire residual material properties of cold-formed steel elliptical hollow sections.” Journal of Constructional Steel Research, 183: 106723. (交大B档SCI)
[29] Man-Tai Chen*, Ben Young. (2021), “Beam-column design of cold-formed steel semi-oval hollow non-slender sections.” Thin-walled Structures, 162: 107376. (交大A档SCI)
[28] Man-Tai Chen, Ben Young, André Dias Martins, Dinar Camotim*, Pedro Borges Dinis. (2021), “Experimental investigation on cold-formed steel lipped channel beams affected by local-distortional interaction under non-uniform bending.” Thin-walled Structures, 161: 107494. (交大A档SCI)
[27] Yinghao Duan, Bin Cheng*, Fenghua Huang, Man-Tai Chen. (2021), “Stress concentration factors of brace in-plane loaded bird-beak SHS gap K-joints.” Journal of Constructional Steel Research, 181: 106592. (交大B档SCI)
[26] Fenghua Huang, Bin Cheng*, Yinghao Duan, Man-Tai Chen, Jiajie Tian. (2021), “Stress concentrations and fatigue behavior of bird-beak SHS overlap K-joints subjected to brace in-plane force.” Thin-walled Structures, 161: 107446. (交大A档SCI)
[25] Dinar Camotim*, André Dias Martins, Pedro Borges Dinis, Ben Young, Man-Tai Chen, Alexandre Landesmann. (2020), “Mode interaction in cold-formed steel members: state-of-art report. Part 2: Couplings involving global buckling.” Steel Construction, 13(3): 186-207.
[24] Dinar Camotim*, André Dias Martins, Pedro Borges Dinis, Ben Young, Man-Tai Chen, Alexandre Landesmann. (2020), “Mode interaction in cold-formed steel members: state-of-art report. Part 1: Fundamentals and local-distortional coupling.” Steel Construction, 13(3): 165-185.
[23] Man-Tai Chen*, Ben Young. (2020), “Tensile tests of cold-formed stainless steel tubes.” Journal of Structural Engineering, ASCE, 146(9): 04020165. (交大A档SCI)
[22] Man-Tai Chen, Ben Young, André Dias Martins, Dinar Camotim*, Pedro Borges Dinis. (2020), “Uniformly Bent CFS Lipped Channel Beams Experiencing Local-Distortional Interaction: Experimental Investigation.” Journal of Constructional Steel Research, 170: 106098. (交大B档SCI)
[21] Man-Tai Chen*, Ben Young. (2020), “Tests of cold-formed normal and high strength steel tubes under tension.” Thin-walled Structures, 153: 106844. (交大A档SCI)
[20] M.H. Lai, W. Song, X.L. Ou, M.T. Chen, Q. Wang, J.C.M. Ho*. (2020), “A path dependent stress-strain model for concrete-filled-steel-tube column.” Engineering Structures, 211: 110312. (交大A档SCI)
[19] Man-Tai Chen, Ben Young, André Dias Martins, Dinar Camotim*, Pedro Borges Dinis. (2020), “Experimental investigation on cold-formed steel stiffened lipped channel columns undergoing local-distortional interaction.” Thin-walled Structures, 150: 106682. (交大A档SCI)
[18] Man-Tai Chen*, Ben Young. (2020), “Tests of cold-formed steel semi-oval hollow section members under eccentric axial load.” Journal of Structural Engineering, ASCE, 146(4): 04020027. (交大A档SCI)
[17] Mianheng Lai, Chengwei Li, Johnny Ching Ming Ho, Man-Tai Chen*. (2020), “Experimental investigation on hollow-steel-tube columns with external confinements.” Journal of Constructional Steel Research, 166: 105865. (交大B档SCI)
[16] M.H. Lai, Y.W. Liang, Q. Wang, F.M. Ren, M.T. Chen, J.C.M. Ho*. (2020), “A stress-path dependent stress-strain model for FRP-confined concrete.” Engineering Structures, 203: 109824. (交大A档SCI)
[15] Man-Tai Chen*, Ben Young. (2020), “Beam-column tests of cold-formed steel elliptical hollow sections.” Engineering Structures, 210: 109911. (交大A档SCI)
[14] J.C.M. Ho, X.L. Ou, M.T. Chen, Q. Wang, M.H. Lai*. (2020), “A path dependent constitutive model for CFFT column.” Engineering Structures, 210: 110367. (交大A档SCI)
[13] Man-Tai Chen*, Ben Young. (2019), “Behavior of cold-formed steel elliptical hollow sections subjected to bending.” Journal of Constructional Steel Research, 158: 317-330. (交大B档SCI)
[12] Man-Tai Chen*, Ben Young. (2019), “Structural behavior of cold-formed steel semi-oval hollow section beams.” Engineering Structures, 185: 400-411. (交大A档SCI)
[11] Ju-Jie Yan, Man-Tai Chen*, Wai-Meng Quach, Ming Yan, Ben Young. (2019), “Mechanical properties and cross-sectional behavior of additive manufactured high strength steel tubular sections.” Thin-walled Structures, 144: 106158. (交大A档SCI)
[10] M.H. Lai, M.T. Chen, F.M. Ren, J.C.M. Ho*. (2019), “Uni-axial behaviour of externally confined UHSCFST columns.” Thin-walled Structures, 142: 19-36. (交大A档SCI)
[9] Ju Chen, Man-Tai Chen*, Ben Young. (2019), “Compression tests of cold-formed steel C- and Z-sections with different stiffeners.” Journal of Structural Engineering, ASCE, 145(5): 04019022. (交大A档SCI)
[8] Yancheng Cai, Wai-Meng Quach*, Man-Tai Chen, Ben Young. (2019), “Behavior and design of cold-formed and hot-finished steel elliptical tubular stub columns.” Journal of Constructional Steel Research, 156: 252-265. (交大B档SCI)
[7] Man-Tai Chen*, Ben Young. (2019), “Structural performance of cold-formed steel elliptical hollow section pin-ended columns.” Thin-walled Structures, 136: 267-279. (交大A档SCI)
[6] Man-Tai Chen, Ben Young*. (2019), “Material properties and structural behavior of cold-formed steel elliptical hollow section stub columns.” Thin-walled Structures, 134: 111-126. (交大A档SCI)
[5] Sidi Shan, Daniel Looi, Yancheng Cai, Peng Ma, Man-Tai Chen, Ray Su, Ben Young, Wei Pan*. (2019), “Engineering modular integrated construction for high-rise building: a case study in Hong Kong.” Proceedings of the Institution of Civil Engineers-Civil Engineering, 172(6): 51-57. (SCI)
[4] Man-Tai Chen, Ben Young*. (2018), “Experimental and numerical investigation on pin-ended cold-formed steel semi-oval hollow section compression members.” Journal of Constructional Steel Research, 151: 174-184. (交大B档SCI)
[3] Man-Tai Chen, Ben Young*. (2018), “Cross-sectional behavior of cold-formed steel semi-oval hollow sections.” Engineering Structures, 177: 318-330. (交大A档SCI)
[2] M.T. Chen, J.C.M. Ho*. (2015), “Concurrent flexural strength and ductility design of RC beams via strain-gradient-dependent concrete stress-strain curve.” The Structural Design of Tall and Special Buildings, 24(9): 629-652. (SCI)
[1] M.T. Chen, J.C.M. Ho*. (2015), “Combined strain gradient and concrete strength effects on flexural strength and ductility design of RC columns.” Computers and Concrete, 15(4): 607-642. (SCI)
京公网安备 11010802027423号