近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1) Haojiang Shi, Huabei Peng, Yidi Chai, Ning Li, Yuhua Wen, Dong Bai, Zihao Liu, Jiazhen Yan*, Ruiqian Zhang, Ming Li, Kangwei Chen, Mingliang Luo, Qi Sun, Rui Li, Xin Dong, Effect of Zr addition on the interfacial reaction of the SiC joint brazed by Inconel 625 powder filler, Journal of the European Ceramic Society, 2021, doi.org/10.1016/j.jeurceramsoc.2021.06.047
2) Xin Dong, Ning Li, Yanan Zhou, Huabei Peng, Yuntao Qu, Qi Sun, Haojiang Shi, Rui Li, Sheng Xu, Jiazhen Yan*, Grain boundary character and stress corrosion cracking behavior of Co-Cr alloy fabricated by selective laser melting, Journal of Materials Science & Technology, 2021, 93: 244-253
3) Haojiang Shi, Yidi Chai, Ning Li, Jiazhen Yan*, Huabei Peng, Ruiqian Zhang, Ming Li, Dong Bai, Kangwei Chen et al. Investigation of interfacial reaction mechanism between SiC and Inconel 625 superalloy using thermodynamic calculation, Journal of the European Ceramic Society, 2021, 41(7):3960-3969.
4) Xin Dong, Yanan Zhou, Qi Sun, Yuntao Qu, Haojiang Shi, Wenbo Liu, Huabei Peng, Biao Zhang, Sheng Xu, Jiazhen Yan*, Ning Li*, Fatigue behavior of biomedical Co-Cr-Mo-W alloy fabricated by selective laser melting, Materials Science & Engineering A, 2020, 795: 140000.
5) Haojiang Shi, Yidi Chai, Ning Li, Jiazhen Yan*, Xin Zhu, Kangwei Chen, Dong Bai, Zihao Liu, Miaomiao Wu, Ruiqian Zhang, Ming Li, Mingliang Luo, Qi Sun, Chenglai Xin, Wenmin Hu, Xin Dong, Interfacial reaction mechanism of SiC joints joined by pure nickel foil, Journal of the European Ceramic Society, 2020, 40(15): 5162-5171.
6) Yanan Zhou, Qi Sun, Xin Dong, Ning Li, Zhijian James Shen, Yuan Zhong, Mirva Eriksson, Jiazhen Yan*, Sheng Xu, Chenglai Xin, Microstructure evolution and mechanical properties improvement of selective laser melted Co-Cr biomedical alloys during subsequent heat treatments, Journal of Alloys and Compounds, 2020, 840: 155664.
7) Xin Dong, Qi Sun, Yanan Zhou, Yuntao Qu, Haojiang Shi, Biao Zhang, Sheng Xu, Wenbo Liu, Ning Li*, Jiazhen Yan*, Influence of microstructure on corrosion behavior of biomedical Co-Cr-Mo-W alloy fabricated by selective laser melting, Corrosion Science, 2020, 170: 108688.
8) Wei Wei, Yanan Zhou, Qi Sun, Ning Li, Jiazhen Yan*, Haopeng Li, Wenbo Liu, Chongxiang Huang, Microstructures and Mechanical Properties of Dental Co-Cr-Mo-W Alloys Fabricated by Selective Laser Melting at Different Subsequent Heat Treatment Temperatures, Metallurgical and Materials Transactions A, 2020, 51(6): 3205-3214.
9) Chenglai Xin, Jiazhen Yan*, Qingyuan Wang, Wei Feng, Chengyun Xin; The microstructural evolution and formation mechanism in Si3N4/AgCuTi/Kovar braze joints ,Journal of Alloys and Compounds, 2020, 820: 153189.
10) Yanan Zhou, Wei Wei, Jiazhen Yan*, Wenbo Liu, Ning Li, Haopeng Li, Sheng Xu, Microstructures and metal-ceramic bond properties of Co-Cr biomedical alloys fabricated by selective laser melting and casting, Materials Science & Engineering A, 759 (2019) 594–602.
11) Chenglai Xin, Jiazhen Yan*, Chengyun, Xin, Qingyuan, Wang, Wei Feng, Haomin Wang, Effects of Ti content on the wetting behavior and chemical reaction in AgCuTi/SiO2 system, Vacuum, 167( 2019): 152-158.
12) Haojiang Shi, Jiazhen Yan*, Ning Li, Xin Zhu, Kangwei Chen, Lingfei Yu, Microstructure and properties of FeCrMo damping alloy brazing joint using Mn-based brazing filler, Vacuum, 2019,159:209-217.
13) Chenglai Xin, Ning Li, Junhong Jia, Jinsong Du, Jiazhen Yan*, Interfacila microstructures formation mechanism between SiO2 substrate and AgCuTi braze alloys, Ceramics International, 2018, 44(15): 17784- 17791.
14) 辛成来，李宁，颜家振*，Al2O3陶瓷Ti+Nb/Mo金属化对其余Kovar合金钎焊连接的组织和力学性能的影响，焊接学报，2018,39（9）：45-48
15) Chenglai Xin, Ning Li, Jiazhen Yan*, Microstructural evolution in the braze joint of sapphire to Kovar alloy by Ti-Cu metallization layer, Journal of Materials Processing Tech. 248 (2017) 115–122.
16) 杜金松，颜家振*，曹建国，杨德勇，辛成来，蓝宝石/4J33合金钎焊接头残余应力的数值模拟分析，焊接学报，2017, 38(8): 87-90.
17) Chenglai Xin, JiazhenYan*, NingLi, WenboLiu, JinsongDu, YongtongCao, Haojiang Shi, Microstructural evolution during the brazing of Al2O3 ceramic to kovar alloy by sputtering Ti/Mo films on the ceramic surface, Ceramics International, 42(2016)12586–12593.
18) 郑义，颜家振*，李宁，曹永同，帅帆 Cu-Mn-Ni-Ag钎料高频感应钎焊 2Cr13不锈钢接头的显微组织与性能, 中国有色金属学报，2016，26(5)：988-994.
19) Yongtong Cao, Jiazhen Yan*, Ning Li, Yi Zheng, Chenglai Xin, Effects of brazing temperature on microstructure and mechanical performance of Al2O3/ AgCuTi/ Fe-Ni-Co brazed joints, Journal of Alloys and Compounds 650 (2015) 30-36.
20) Mou Xiaoxiao, Li Ning, Yan Jiazhen*, Investigation of constant prestress in effecting damping capacity of Fe-15Cr-2.5Mo-1.0Ni casting ferromagnetic alloy, Journal of Alloys and Compounds 650 (2015) 92-96.
21) Yan Jiazhen, Li Ning, Fu Xu, Zhang Ying, The strengthening effect of spinodal decomposition and twinning structure in MnCu-based alloy, Materials Science and Engineering: A, 2014, 618: 205-209.
22) Yan Jiazhen, Li Ning, Fu Xu, Liu Wenbo, Liu Ying, Zhao Xiuchen, Effect of pre-deformation and subsequent aging on the damping capacity of Mn-20 at.%Cu-5 at.%Ni-2 at.%Fe alloy, Advanced Engineering Materials, 2015, 17(9): 1332-1337.
23) 谢晋武，刘文博，李宁，颜家振*，钟珍玉，刘颖，赵修臣，枝晶偏析对MnCu 合金阻尼性能的影响，功能材料，2015，46（13）: 13087-13090.
24) Yan Jiazhen, Zhang Yue, Huang Wanxia, Effect of Mo-W Co-doping on semiconductor-metal phase transition temperature of vanadium dioxide film, Thin Solid Films, 2008, 516( 23): 8554-8558.
25) Yan Jiazhen, Huang Wanxia, Zhang Yue, Characterization of preferred orientated vanadium dioxide film on muscovite (001) substrate. Physica Status Solidi A, 2008, 205(10): 2409-2412.
26) 颜家振，张 月，刘阳思，张玉波，黄婉霞，涂铭旌，掺钨VO2薄膜及其相变温度研究，稀有金属材料与工程，2008, 37(9): 1648-1691.
27) 颜家振，黄婉霞，张月，刘小杰，涂铭旌，不同衬底上VO2薄膜的微观结构和光学性能研究，稀有金属材料与工程， 37(5): 819-822, 2008
28) 颜家振，黄婉霞，张月，何鹏，李宁，云母表面不同厚度VO2薄膜的红外光学特性，红外与激光工程，2011, 40(7): 1305-1309.
29) 颜家振，黄婉霞，李宁，VO2/TiO2 复合薄膜的结构和红外光学性质研究，红外与激光工程，2013, 42(9): 2485-2489.
30) Kangwei Chen, Jiazhen Yan, Ning Li, Mingliang Luo, Haojiang, Shi, Xin Zhu, Ying Liu, Xiuchen Zhao, Ran Zhang, The effect of the annealing temperature on the damping capacity under constant prestress, mechanical properties and microstructure of an Fe–11Cr-2.5Mo-0.1Zr-1.0Ni forged damping alloy, Journal of Alloys and Compounds, 2020(851) 30: 152429
31) Zhou Yanan, Li Ning, Wang Hongmei, Yan Jiazhen, Liu Wenbo, Xu, Sheng, Effects of the rare earth element lanthanum on the metal-ceramic bond strength of dental casting Co-Cr alloys, JOURNAL OF PROSTHETIC DENTISTRY, 2019(121)5: 848-857
32) Liu Wenbo, Chen Xue, Xiang Peng, Zhang Shichao, Yan Jiazhen, Li Ning, Shi Sanqiang, Chemically monodisperse tin nanoparticles on monolithic 3D nanoporous copper for lithium ion battery anodes with ultralong cycle life and stable lithium storage properties, NANOSCALE, 2019(11) 11: 4885-4894
33) Liu Wenbo, Chen Long, Cui Liu, Yan Jiazhen, Zhang Shichao, Shi Sanqiang, Freestanding 3D nanoporous Cu@1D Cu2O nanowire heterostructures: from a facile one-step protocol to robust application in Li storage, JOURNAL OF MATERIALS CHEMISTRY A, 2019(7) 25 : 15089-15100, IF10.733
34) Yan Shanghua, Li Ning, Wangjun, Yan Jiazhen, Liu Wenbo, Li Dong, Mou Xiaoxiao, Liu Ying, Zhao Xiuchen, Effect of minor Zr element on microstructure and properties of Fe-16Cr-2.5Mo damping alloys, JOURNAL OF ALLOYS AND COMPOUNDS, 2018,740: 587-594，IF3.779
35) Xin Chenglai, Li Ning, Yan Jiazhen, Cao Yongtong, Effects of Ti Activity on Mechanical Properties and Microstructures of Al2O3/Ag-Cu-Ti/Fe-Ni-Co Brazed Joints, RARE METAL MATERIALS AND ENGINEERING, 2018,47(4):1031-1036，IF0.29
36) Zhou Yanan, Li Ning, Yan Jiazhen, Zeng Qiang, Comparative analysis of the microstructures and mechanical properties of Co-Cr dental alloys fabricated by different methods, JOURNAL OF PROSTHETIC DENTISTRY, 2018,120(4):617-623，IF2.34
37) Wei Wei, Zhou, Zhou Yanan, Liu Wenbo, Li Ning, Yan Jiazhen, Li Haopeng, Microstructural Characterization, Mechanical Properties, and Corrosion Resistance of Dental Co-Cr-Mo-W Alloys Manufactured by Selective Laser Melting, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27(10): 5312-5320
38) Dong Xin, Liu Wenbo, Chen Xue, Yan Jiazhen, Li Ning, Shi Sanqiang, Zhang Shichao, Yang Xusheng, Novel three dimensional hierarchical porous Sn-Ni alloys as anode for lithium ion batteries with long cycle life by pulse electrodeposition, CHEMICAL ENGINEERING JOURNAL, 2018,350:791-798
39) Li Dong, Liu Wenbo Li Ning, Zhong Zhenyu, Yan Jiazhen, Shi Sanqiang, An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature, Journal of visualized experiments : JoVE, 2018,139:
40) Liu Wenbo, Cheng Peng, Yan Jiazhen, Li Ning, Shi Sanqiang, Zhang Shichao, Temperature-induced surface reconstruction and interface structure evolution on ligament of nanoporous copper, SCIENTIFIC REPORTS, 2018,8: 447
41) 周亚男, 魏维, 颜家振, 李宁, 许胜, 张幖, 激光选区熔覆牙科用钴铬钼合金的金瓷结合性研究, 工程科学与技术，2018,50（2）：220-225
42) Li Dong, Liu Wenbo, Li Ning, Yan Jiazhen, Shi Sanqiang, Remarkable Improvement of Damping Capacity of Mn-20Cu-5Ni-2Fe (at%) Alloy by Zinc Element Addition, ADVANCED ENGINEERING MATERIALS, 2017,19(12):1700437
43) Jianli Shang, Jiazhen Yan, Ning Li, Brazing W and Fe-Ni-Co alloy using Ag-28Cu and Ag-27Cu-3.5Ti fillers, Journal of Alloys and Compounds, 2014, 611: 91-95.
44) Shi QW, Huang WX, Wu J, Zhang YX, Xu YJ, Zhang Y, Qiao S, Yan JZ, Terahertz transmission characteristics across the phase transition in VO2 films deposited on Si, sapphire, and SiO2 substrates, Journal of Applied Physics, 2012, 112(3): 033523.
45) Wu ZK, Li N, Jian C, Zhao WQ, Yan JZ, Low temperature degradation of Al2O3-doped 3Y-TZP sintered at various temperatures, Ceramics International, 2013,39(6):719-724.
46) Peng He, Wan-Xia Huang, Jia-Zhen Yan, Mao-Yong Zhi, Jing-Han Cai, Rong-Rong Luo, Preparation and thermochromic property of VO2/mica pigments, Materials Research Bulletin, 46(6):966, 2011
京公网安备 11010802027423号