近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Yue, Chongxiang.Mathematical models for predicting the austenite grain size in hot working of GCr15 steel[J],COMPUTATIONAL MATERIALS SCIENCE,2022,45(2):462-466
[2]Zhou, Pingzhen.Mathematic modeling and FE simulation of radial-axial ring rolling large L-section ring by shap...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,72(5-8):729-738
[3]裴继斌.Microstructure and formation mechanism of aluminized coatings on nickel-based superalloys[A],5th International Conference on Surface Engineering,2022,373-374:204-207
[4]张立文.Microstructure and Formation Mechanism of Aluminized Coatings on Nickel-based Superalloys[J],KEY ENGINEERING MATERIALS,2022,373(1):204-207
[5]Shen, Wen-fei.Metadynamic recrystallization of Nb-V microalloyed steel during hot deformation[J],JOURNAL OF MATERIALS RESEARCH,2022,32(3):656-665
[6]Liu, Jiaxi.Microstructure and Mechanical Properties of Al/Sn-Zn-X/Cu Solder Joints[A],16 int conf elect packaging technology,2022,1267-1270
[7]Liao, Shulun.Modeling and finite element analysis of rod and wire steel rolling process[J],北京科技大学学报 英文版,2022,15(4):412-419
[8]Yue, Chong-xiang.Modelling of recrystallization behavior and austenite grain size evolution during the hot rolli...[J],APPLIED MATHEMATICAL MODELLING,2022,34(9):2644-2653
[9]Deng, Xiaohu.Modeling and simulation of dynamic recrystallization of GCr15 steel using cellular automaton me...[A],8th International Forum on Advanced Materials Science and Technology (IFAMST-8),2022,750:156-+
[10]张立文.Modelling the Effects of Processing Parameters on Dynamic Recrystallization Behaviors during Hot ...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,24(5)
[11]Kan, Y..Microstructure-Based Numerical Simulation of the Tensile Behavior of SiCp/Al Composites[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,23(3):1069-1076
[12]张立文.Microstructure evolution modeling of FGH96 superalloy during inertia friction welding process[J],FINITE ELEMENTS IN ANALYSIS AND DESIGN,2022,80(1):63-68
[13]Nie, Longfei.Microstructure evolution modeling of FGH96 superalloy during inertia friction welding process[J],FINITE ELEMENTS IN ANALYSIS AND DESIGN,2022,80:63-68
[14]Deng, Xiaohu.Modeling of the influence of initial grain sizes on dynamic recrystallization using a cellular ...[A],7th International Forum on Advanced Material Science and Technology,2022,675-677:933-+
[15]Gu, Sendong.Modeling the Effects of Processing Parameters on Dynamic Recrystallization Behavior of Deformed...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,24(5):1790-1798
[16]张立文.Modeling the influence of initial grain sizes on dynamic recrystallization using a cellular autom...[J],MATERIALS SCIENCE FORUM,2022,675(1):933-936
[17]张驰.Modeling the plastic deformation behavior of polycrystalline ferritic stainless steel using CPFEM[A],The 17th IUMRS International Conference in Asia,2022
[18]张立文.Multi-field Coupled FEM Simulation for Hot reversible Rolling with Large Dimension Cross-Section ...[A],AIP conference proceedings,2022,153(1):354-360
[19]Gu, Sendong.Multi-field Coupled Numerical Simulation of Hot Reversible Rolling Process of GCr15 Steel Rod[A],11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,1532:354-360
[20]Gu, Sen-dong.Multi-field coupled numerical simulation of microstructure evolution during the hot rolling pro...[J],COMPUTATIONAL MATERIALS SCIENCE,2022,50(7):1951-1957
[21]Lu, Cheng.Numerical simulation and technological parameter optimization for quenching process of a gas tu...[J],Journal of Materials Science Technology,2022,22(6):860-864
[22]张立文.Numerical study of effective surface heat transfer coefficients for different quenchants by inver...[A],17th International Federation for Heat Treatment and Surface Engineering Congress 2008, IFHTSE 2008,2022,2:717-720
[23]张立文.Numerical Study of Effective Surface Heat Transfer Coefficients for Different Quenchants by Inver...[J],Journal of The Japan Society for Heat Treatment,2022,49(8):717-720
[24]张立文.Numerical simulation of temperature field for inertia friction welding of GH4169 superalloy[J],机械工程学报,2022,38(SUPPL.):200-202+222
[25]张立文.Numerical simulation of different types of voids closure in large continuous casting billet durin...[A],International Conference on the Technology of Plasticity, ICTP 2017,2022,207:532-537
[26]张立文.Numerical simulation of different types of voids closure in large continuous casting billet durin...[J],Procedia engineering,2022,207:532-537
[27]Wang, MW.Numerical simulation of vacuum heat treatment thermal hysteresis time of GH4169 superalloy work...[A],14th Congress of the International-Federation-for-Heat-Treatment-and-Surface-Engineering,2022,772-775
[28]王明伟.Numerical simulation of vacuum heat treatment thermal hysteresis time of GH4169 superalloy workpi...[J],材料热处理学报,2022,25(5):772-775
[29]Lu Cheng.Numerical simulation on forging process of TC4 alloy mounting parts[J],Transactions of Nonferrous Metals Society of China,2022,16(6):1386-1390
[30]张立文.Numerical simulation of inertia friction welding process of GH4169 alloy[A],ICTPMCS: 2nd International Conference on Thermal Process Modelling and Computer Simulation,2022,120:681-687
[31]张立文.Numerical simulation of inertia friction welding process of GH4169 alloy[J],JOURNAL DE PHYSIQUE IV,2022,120:681-687
[32]张立文.Numerical simulation of microstructure evolution during continuous hot rolling process of GCr15 s...[A],2022,1016 MSF:1733-1738
[33]张立文.Numerical Simulation of On-Line Water Cooling Process of Non-Quenched and Tempered Large-sized St...[A],The 5th Asian Conference on Heat Treatment and Surface Engineering,2022
[34]Ma, Zhengkun.Optimization method of pulsed plasma carburizing progress[J],Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology,2022,38(5):534-538
[35]张驰.Precision Forming and Assembling Technique of Large Diameter Thin-walled Rotor Can for Reactor Co...[A],Fimpart-2017,2022
[36]Kan, Y..Probabilistic pore healing model for prediction of relative density in heat treatment[J],MATERIALS RESEARCH INNOVATIONS,2022,18:1026-1030
[37]Wang, YT.Quenchant characterization system based on application of thermal probes of typical steels[A],14th Congress of the International-Federation-for-Heat-Treatment-and-Surface-Engineering,2022,536-539
[38]Wang, Yu-Ting.Quenchant characterization system based on application of thermal probes of typical steels[J],材料热处理学报,2022,25(5):536-539
[39]Ruan, J. H..Regression models for predicting plate plan view pattern during wide and heavy plate rolling[J],IRONMAKING STEELMAKING,2022,41(9):656-664
[40]张立文.Research on austenite grain growth behavior of medium carbon Cr–Ni–Mo alloyed steel during heat...[A],The 5th Asian Conference on Heat Treatment and Surface Engineering,2022
京公网安备 11010802027423号