张伟 - 大连理工大学 - 机械工程学院

个人简介

教育经历 2008.92015.6大连理工大学固体力学博士 2004.92008.7大连理工大学汽车工程学士工作经历 2015.7至今大连理工大学机械工程学院讲师

研究领域

（1）高性能连接结构数字孪生技术（2）航空航天装备装配性能控制技术（3）关键基础件健康运维与智能传感（4）航空航天自动化装配机器人（5）航空航天螺栓、轴承、管接头等基础件研制

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Longfei Tan，Chengyu Wang，Yang liu，Wei Sun，Wei Zhang(通讯作者) . Study on hysteresis and threaded fitting behavior of bolted joint with non-parallel bearing surface，Mechanical Systems and Signal Processing, 2022, 168-108655. (影响因子8.934，TOP期刊) Zhang W, Bai X, Hou B, Sun Y, Han X. Mechanical properties of the three-dimensional compression-twist cellular structure. Journal of Reinforced Plastics and Composites, 2020, 9(7-8):260-277. (影响因子3.383，JCRQ2) 张伟, 刘阳, 侯博文, 陈德安, 孙伟, 韩啸. 螺距误差下的螺纹副应力分布及其对装配预紧力的影响研究. 机械工程学报, 2021, 57(17):132-148. (TOP期刊) Longfei Tan，Cheng Yan，Hai Yi，Wei Zhang(通讯作者)，WeiSun. Torsional and compressive properties of bolted joint under forward-reverse tightening. Journal of Mechanical Engineering Science. (JCRQ2) Chen Dean, Ma Yue, Hou Bowen, Liu Ruiqi, Zhang Wei(通讯作者). Tightening behavior of bolted joint with non-parallel bearing surface, International Journal of Mechanical Sciences, 2019, 153: 240-253.(影响因子6.772，TOP期刊) Han X, Jin Y, Zhang W(通讯作者), Hou W, Yu Y. Characterisation of moisture diffusion and strength degradation in an epoxy-based structural adhesive considering a post-curing process[J]. Journal of Adhesion Science & Technology, 2018,32(15):1643-1657.( JCRQ2) 闫平,邹存健,张伟(通讯作者),韩清凯,孙伟.不平行接触下的螺栓连接刚度及其转子动态特性[J].动力学与控制学报,2018,16(6):561~567 马跃, 吴甜, 孙新, 张伟(通讯作者). 轮盘-轴组件结合面螺栓等效刚度及其对动力学性能影响的研究[J]. 风机技术, 2019(2). Bowen Hou, Yadong Sun, Wei Sun, Wei Zhang (通讯作者). The properties of bolted joint assembly with contact stiffness, International Journal of Smart Engineering[J]. 2018,2(4):325-342. X Han, YX Chao, W Zhang, YZ Chao, CW Wu*. Study on the effect of post curing on the mode II fracture energy of structural adhesive using a parameter identification approach[J]. International Journal of Adhesion and Adhesives, 2019, 95: 102398. X Han, Y Jin, LFM da Silva, M Costa, CW Wu*. On the effect of adhesive thickness on mode I fracture energy - an experimental and modelling study using a trapezoidal cohesive zone model[J]. The Journal of Adhesion, 2019. DOI: 10.1080/00218464.2019.1601087. X Han, G Akhmet, W Zhang, YX Chao, Y Jin, Y Yu, P Hu*, A Ibraimov. The effect of adhesive fillet on mechanical performance of adhesively bonded corrugated sandwich structures: an experimental-numerical study[J]. The Journal of Adhesion, 2019. DOI: 10.1080/00218464.2019.1657417. X Han, YX Chao, P Yang, XY Li, W Zhang, Y Jin, CW Wu*. Strength prediction of adhesively bonded ferrite pillar-tin bronze plate under axial shear loading[J]. Journal of Adhesion Science and Technology, 2019. DOI: 10.1080/01694243.2019.1679522.