当前位置: X-MOL首页全球导师 国内导师 › 梁军生

个人简介

教育经历 2003.92007.12大连理工大学机械电子工程博士 2000.92003.3桂林电子科技大学机械制造及其自动化硕士 1991.91995.7合肥工业大学机械设计及制造学士 工作经历 2016.12至今大连理工大学研究员 2009.12至今大连理工大学副研究员 2008.12009.12大连理工大学助理研究员 1995.12003.8中国机械工业集团桂林电器科学研究院工程师

研究领域

微-纳机电系统 (N/MEMS) 微纳米尺度3D增材制造 极端环境微纳器件设计制造 高性能微操作医疗器械设计制造

近期论文

查看导师最新文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

胡亚明.模板微电铸工艺制备金字塔形镍纳米尖[J],光学精密工程,2021,28(7):1500-1509 宿世界.Microtip focused electrohydrodynamic jet printing Microtip focused electrohydrodynamic jet printi...[J],Nanoscale,2021,48(12):24450-24462 王大志.Patterning of graphene microscale structures using electrohydrodynamic atomisation deposition o...[J],MICRO & NANO LETTERS,2021,9(2):136-140 Zhao, Xiaojun,Wang, Dazhi,Lin, Yigao,Sun, Yulin,Ren, Tongqun,Liang, Junsheng,Madou, Marc.Numerical simulation of coaxial electrohydrodynamic jet and printing nanoscale structures[J],MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS,2019,25(12):4651-4661 Li, Kai,Jia, Haoran,Qian, Jianghong,Du, Zhiyuan,Ren, Tongqun,Liang, Junsheng,Martinez-Chapa, Sergio O.,Madou, Marc,Wang, Dazhi,Yi, Shanshan.Instrument for fine control of drop-on-demand electrohydrodynamic jet printing by current measure...[J],Review of Scientific Instruments,2019,90(11) 张小辉,胡亚明,梁军生,宿世界,王大志.各向异性湿法刻蚀中刻蚀温度对硅尖形貌的影响[J],机电工程技术,2019,48(9):35-37 王金鹏,周晨飞,梁军生,王大志,任同群.退火工艺对薄膜型铂电阻热阻特性的影响探究[J],机电工程技术,2019,48(8):26-28 梁军生,杨金鹤,张小辉,胡亚明,王大志.聚酰亚胺薄膜旋涂工艺及其抗电击穿性能[J],传感器与微系统,2019,38(4):4-7 Li, Kai,Wang, Dazhi,Wang, Qiang,Song, Kedong,Liang, Junsheng,Sun, Yulin,Madoua, Marc.Thermally Assisted Electrohydrodynamic Jet High-Resolution Printing of High-Molecular Weight Bi...[J],MACROMOLECULAR MATERIALS AND ENGINEERING,2018,303(11) 石鹏,王大志,周鹏,李学木,慈元达,王骁,梁军生.PZT厚膜的电雾化沉积与溶胶渗透研究[J],机电工程技术,2018,47(9):12-15 梁军生,陈亮,王金鹏,张朝阳,王大志.磁控溅射制备氮化钽导电薄膜及其性能研究[J],电子元件与材料,2018,37(8):36-39 梁军生,郑胜,王金鹏,王大志,任同群.无裂纹SiO2薄膜的纳尺度电射流叠层沉积工艺[J],电子元件与材料,2018,37(07):1-4 Ren, Tongqun,Hui, Meiling,Wang, Xiaodong,Zhang, Zhiyong,Liang, Junsheng.Structural state inspection using dual-tree quaternion wavelet transform[J],Journal of Vibroengineering,2018,20(1):138-151 王大志,任同群,崔岩,梁军生,刘军山,刘冲,徐征,李经民."微纳米制造技术"研究生全英文课程的设计与实践[J],教育教学论坛,2018,5:144-145 Wang, Dazhi,Zhao, Xiaojun,Lin, Yigao,Liang, Junsheng,Ren, Tongqun,Liu, Zhenghao,Li, Jiangyu.Nanoscale coaxial focused electrohydrodynamic jet printing.[J],Nanoscale,2018,10(21):9867-9879 王大志,任同群,徐征,崔岩,刘军山,刘冲,李经民,梁军生.研究生微纳米制造技术双语教学课程的设计与实践[J],教育教学论坛,2017,41:224-225 Liang, Junsheng,Luo, Ying,Zheng, Sheng,Wang, Dazhi.Enhance performance of micro direct methanol fuel cell by in situ CO2 removal using novel anode...[J],JOURNAL OF POWER SOURCES,2017,351:86-95 梁军生,李守祚,罗颖,王大志.微型直接甲醇燃料电池的三维数值模拟研究[J],传感器与微系统,2017,36(2):14-17 王大志,任同群,梁军生,刘冲,王立鼎.Fabrication of micro/nano-structures by electrohydrodynamic jet[J],Frontiers of Mechanical Engineering,2017,12(4):477-489 梁军生,任同群,王大志.Effects of Imidization Process on the Electric Breakdown Strength[A],2017,868:248-253 梁军生,任同群,王大志.High Performance Electrodes for All-Solid-State Supercapacitor[A],2017,868:230-235 梁军生,宿世界,徐双超,李浩,王大志.电射流沉积纳米复合电极的超级电容研究[J],电源技术,2016,40(11):2198-2200 梁军生,宿世界,方旭,王大志,徐双超.静电纺丝PANI/CNT/PEO超级电容器电极的性能研究[J],电子元件与材料,2016,35(9):78-81 Liang, Junsheng,Su, Shijie,Fang, Xu,Wang, Dazhi,Xu, Shuangchao.Electrospun fibrous electrodes with tunable microstructure made of polyaniline/multi-walled car...[J],MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS,2016,211:61-66 Wang, D.,Dorey, R. A.,Li, X.,Shi, P.,Zhao, X.,Liang, J.,Ren, T.,Dong, W.,Yang, R.,Wang, Y..Electrohydrodynamic atomization deposition and mechanical polishing of PZT thick films[J],CERAMICS INTERNATIONAL,2016,42(11):12623-12629 Wang, Ke,Liu, Chong,Wang, Dazhi,Liang, Junsheng,Ren, Tongqun.Instrument for investigating the rail of a ballastless track under longitudinal temperature for...[J],ADVANCES IN MECHANICAL ENGINEERING,2016,8(7) Wang, Dazhi,Ren, Tongqun,Wang, Xiaodong,Zha, Wen,Feng, Li,Ma, Qian,Liu, Xianming,Yang, Ning,Xu, Zheng,Zhao, Xiaojun,Liang, Junsheng.Electrohydrodynamic jet printing and a preliminary electrochemistry test of graphene micro-scal...[J],JOURNAL OF MICROMECHANICS AND MICROENGINEERING,2016,26(4) Liu Chong,Wei Jiahong,Zhang Zhixin,Liang Junsheng,Ren Tongqun,Xu Hongquan.Design and evaluation of a remote measurement system for the online monitoring of rail vibratio...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT,2016,230(3):724-733 王大志,郁风,董维杰,梁军生,任同群,吕景明.PZT厚膜的电射流沉积研究[J],传感器与微系统,2016,35(2):19-22 Liang, Junsheng,Li, Pengfei,Wang, Dazhi,Fang, Xu,Ding, Jiahong,Wu, Junxiong,Tang, Chang.Fabrication of Crack-Free Barium Titanate Thin Film with High Dielectric Constant Using Sub-Mic...[J],MATERIALS,2016,9(1) 王大志,李学木,石鹏,赵小军,梁军生,任同群,董维杰,杨睿,王一帆.Electrohydrodynamic atomization deposition and mechanical[J],CERAMICS INTERNATIONAL,2016,42(11):12623-12629 王大志,任同群,张宏,崔岩,孙晶,梁军生,刘冲,张永顺,杜立群.论双语教学在"微纳米制造技术"课程中的应用[J],教育教学论坛,2015,49:184-185 Wang, D.,Wang, X.,Zhu, X.,Liang, J.,Ren, T.,Zha, W.,Dong, W.,Rocks, S. A.,Dorey, R. A.,Xu, Z..Electrohydrodynamic jet printing of PZT thick film micro-scale structures[J],JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,2015,35(13):3475-3483 Liang, Junsheng,Liu, Kuanyao,Wang, Dazhi,Li, Hao,Li, Pengfei,Li, Shouzuo,Su, Shijie,Xu, Shuangchao,Luo, Ying.Facile fabrication of superhydrophilic/superhydrophobic surface on titanium substrate by single...[J],APPLIED SURFACE SCIENCE,2015,338:126-136 Liang, Junsheng,Liu, Kuanyao,Li, Shouzuo,Wang, Dazhi,Ren, Tongqun,Xu, Xiaoying,Luo, Ying.Novel Flow Field with Superhydrophobic Gas Channels Prepared by One-step Solvent-induced Crysta...[J],NANO-MICRO LETTERS,2015,7(2):165-171 Ren, Tongqun,He, Liang,Wang, Dazhi,Liang, Junsheng,Hui, Meiling.Structural state detection using quaternion-based three-channel joint transmissibility[J],JOURNAL OF VIBROENGINEERING,2015,17(2):928-938 Liang, J. S.,Zhang, Y.,Wang, D. Z.,Luo, T. P.,Ren, T. Q..A novel compact heat exchanger using gap flow mechanism[J],REVIEW OF SCIENTIFIC INSTRUMENTS,2015,86(2):024904 Ren, Tongqun,Hui, Meiling,Liang, Junsheng,Wang, Dazhi,He, Liang,Chen, Yonghang.Structural state detection using transmissibility and Non- negative Matrix Factorization[J],International Journal of Signal Processing, Image Processing and Pattern Recognition,2015,8(11):309-318 王大志,李明强,梁军生,刘冲,任同群.Formation of membrane electrode assembly for high temperature methanol fuel cells[A],2015,645(1):1175-1180 王大志,梁军生,任同群,罗怡,王晓东,刘冲.Electrohydrodynamic atomization deposition of fuel cell catalyst-coated membrane with structure a...[A],2015,645(1):1156-1162 张海,刘冲,王大志,张志新,任同群,梁军生.应变电测法监测无缝线路实际锁定轨温的变化[J],传感器与微系统,2014,33(11):62-64,81 Liang J.,Kang R.,Ma F.,Yu Y.,Liu J..Development of ultrasonic lapping equipment for small holes finishing[A],2014,1017:812-817 Wang D.,Zhu X.,Zha W.,Ren T.,Li M.,Liang J.,Liu C..Formation of membrane electrode assembly for high temperature methanol fuel cells[J],Key Engineering Materials,2014,645:1175-1180 Dazhi W.,Wen Z.,Zhu X.,Li Y.,Liang J.,Ren T.,Luo Y.,Wang X.,Liu C..Electrohydrodynamic atomization deposition of fuel cell catalyst-coated membrane with structure a...[J],Key Engineering Materials,2014,645:1156-1162 王大志,任同群,刘冲,徐征,娄志峰,梁军生,孙晶.仪器学科研究生培养中“理工融合”的构建[J],教育教学论坛,2014,32:276-277,278 Wang, D. Z.,Li, Y.,Liang, J. S.,Xia, Z. X.,Wang, S. L.,Liu, C.,Sun, G. Q.,Luo, Y.,Wang, X. D..Fabrication and Performance of Different Structural Cathode Catalyst Layers by EHDA Deposition ...[J],FUEL CELLS,2014,14(2):277-283 Wang, Dazhi,Zhang, Fusheng,Liang, Junsheng,Zhang, Hai,Liu, Chong,Zhou, Wenjing,Li, Liang,Ren, Tongqun,Wang, Tianrao.Temperature Drifts Compensation of Strain-temperature Method for the Measurement of Continuous ...[A],2014,541-542:1370-+ Liang, Junsheng,Li, Dong,Wang, Dazhi,Liu, Kuanyao,Chen, Li.Preparation of stable superhydrophobic film on stainless steel substrate by a combined approach...[J],APPLIED SURFACE SCIENCE,2014,293:265-270 游林涛,王天娆,梁军生,任同群,刘冲,王轲,王大志.无砟轨道钢轨温度力的有限元分析及实验研究[J],中国科技论文,2013,8(11):1119-1121 张富生,王大志,梁军生,王轲,刘冲,王天娆.无线应变采集节点的温漂误差补偿[J],传感器与微系统,2013,32(10):27-29,33 Liang, Junsheng,Hu, Jie,Zhang, Lei,Ma, Wenjian.Characterization of the Interfacial Normal Stress between Current Collector and Gas Diffusion L...[A],2013,566-571 Wang, Dazhi,Zhu, Yingli,Liu, Chong,Sun, Gongquan,Wang, Liang,Liang, Junsheng,Xia, Zhangxun,Wang, Suli.Formation of an integrated catalyst-coated membrane using electrohydrodynamic atomization Layer...[J],JOURNAL OF POWER SOURCES,2013,224:202-210 刘冲,任同群,梁军生,王大志.Detection of rail fastener conditions using time-frequency entropy based[A],2013,333(10):1708-1712 Wang, D.,Wang, L.,Liang, J.,Liu, C..Instrument for layer-by-layer deposition of catalyst layers directly on proton exchange membran...[J],REVIEW OF SCIENTIFIC INSTRUMENTS,2012,83(9):095005 Wang, Dazhi,Duan, Hongbin,Liang, Junsheng,Liu, Chong.Formation of porous and dense Pt/C catalyst films using electrohydrodynamic atomisation deposit...[J],MICRO & NANO LETTERS,2012,7(3):235-239 王大志,梁军生,刘冲.Electrohydrodynamic atomization deposition and patterning of a carbon nano-suspension[J],Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems,2012,225(4):149-154 Sun, Lingjun,Liu, Chong,Liang, Junsheng,Zhu, Xuelin,Cui, Tianhong.A self-pumping and self-breathing micro direct methanol fuel cell with polymer bipolar plates[J],JOURNAL OF POWER SOURCES,2011,196(18,SI):7533-7540 Zhu, Yingli,Liu, Chong,Liang, Junsheng,Wang, Liding.Investigation of the effects of compression pressure on direct methanol fuel cell[J],JOURNAL OF POWER SOURCES,2011,196(1,SI):264-269 段洪斌,王大志,梁军生,刘冲.C纳米悬浮液的电流体驱动雾化研究[J],中国科技论文在线,2010,05(8):579-584 刘冲,朱应利,梁军生,马天亮,王立鼎.质子交换膜燃料电池封装测试平台的研制[J],电源技术,2010,34(4):346-350

推荐链接
down
wechat
bug