近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Zhang, J.,Tian, Y.,Ren, Z. J.,Han, Y.,Jia, Z. Y..Rotation Calibration Method for Thrust Based on Force Error Analysis[J],EXPERIMENTAL TECHNIQUES,2020,44(1):85-98
Ren, Zongjin,Hua, Mei,Zhang, Jun,Li, Yang.Design and Performance Analysis of a Lateral Thrust Measuring Device[A],2019,1267(1)
Ren, Zongjin,Sun, Cong,Zhang, Jun,Ma, Lulu,Zhao, Kai.Study on Zero Drift of Charge Amplifier Based on MOSFET 3N165 and OPA LF356N[A],2019,1187(2)
Zhang, Jun,Han, Yu,Ren, Zongjin,Shao, Jun,You, Chuancun,Jia, Zhenyuan.A New Calibration Method for Piezoelectric Testing System Based on Orthogonal Calibration Method[J],JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THEASME,2019,141(9)
张军,宋鹏,任宗金,李明昱.压电测力仪的联立标定方法研究[J],传感器与微系统,2019,38(6):39-41,45
张军,徐宏,任宗金.压电式推力测量装置模态参数辨识研究[J],传感器与微系统,2019,38(4):48-50
Liu, X.,Wang, G.,Liu, J.,Zhang, J.,Liu, S.,Wang, C.,Yang, Z.,Sun, J.,Song, J..Influence of water addition on the modification of polyethylene surface by nitrogen atmospheric pressure plasma jet[J],JOURNAL OF APPLIED POLYMER SCIENCE,2019,136(9)
任宗金,张亚娟,张军,杜瑞锋,徐田国.大长径比模型多维气动力测量天平设计[J],传感器与微系统,2019,38(2):56-58
史乃青,张军,仁宗金.压电测力仪尺寸参数对测试精度影响研究[J],压电与声光,2018,06:947-950
Zhang, Jun,Tian, Yu,Ren, Zongjin,Chang, Qingbing,Jia, Zhenyuan.The calibration of force offset for rocket engine based on deep belief network[J],MEASUREMENT & CONTROL,2018,51(5-6):172-181
Zhang, Jun,Chang, Qingbing,Ren, Zongjin,Shao, Jun,Wang, Xinlei,Tian, Yu.Axial Calibration Methods of Piezoelectric Load Sharing Dynamometer[A],MATERIALS SCIENCE, ENERGY TECHNOLOGY AND POWER ENGINEERING II (MEP2018),2018,1971
任宗金,何小龙,张军,范宏伟.一种压电式大扭矩测力仪设计与实验研究[J],压电与声光,2017,39(6):817-820
张军,齐亚州,任宗金,宋鹏.标定偏心下压电力传感器测试精度研究[J],压电与声光,2017,39(6):873-877
任宗金,张军,孙晶,崔岩,马建伟,陈星,温锋.面向工程专业认证的大学生实践能力评价方法研究[J],山东农业工程学院学报,2017,34(12):11-12
Tian, Yu,Zhang, Jun,Ren, Zong-jin,Liu, Wei,Jia, Zhenyuan,Qi, Yazhou.A novel piezoelectric dynamometer based on double-sensor for thermal compensation[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OFMECHANICAL ENGINEERING SCIENCE,2017,231(23):4479-4491
Wang, Y-Q,Bo, Q-L,Liu, H-B,Lian, M.,Wang, F. B.,Zhang, J..Full-oscillatory components decomposition from noisy machining vibration signals by minimizing the Q-factor variation[J],TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL,2017,39(9):1313-1328
任宗金,王春平,张军,范宏伟,张亚娟,化梅.一种毫牛级微小力产生方法及装置研究[A],中国航天第三专业信息网第三十八届技术交流会暨第二届空天动力联合会议,2017,7
张军,徐成帅,任宗金,齐亚州.羽流力/力矩测量系统在线标定研究[J],传感器与微系统,2017,36(1):13-15,19
张军,史乃青,钱敏,辛学亭.基于归一化标定的压电测力仪测试精度研究[J],压电与声光,2016,38(1):46-50,54
张军,王康,钱敏,徐成帅,刘首乾.压电矢量力传感器力分量解耦与实验研究[J],仪表技术与传感器,2016,1:1-3
张军,田丰,钱敏,齐亚州.热场作用下预紧结构与压电传感器输出的研究[J],压电与声光,2015,37(6):995-998,1002
Sheng, Xianjun,Wang, Zhou,Xu, Lei,Zhang, Jun.Coordinated Motion Strategy for Multi-manipulators System Based on Joint Space Synchronized Cross-Coupled Control[A],8th International Conference on Intelligent Robotics and Applications(ICIRA),2015,9245:396-407
Liu, H. B.,Hou, B.,Zhang, J.,Wang, Y. Q..Improving Machining Accuracy of Thin-Wall Parts Using the Information-Localizing Technology[A],8th International Conference on Intelligent Robotics and Applications(ICIRA),2015,9245:701-709
刘海波,张军,王永青.Improving machining accuracy of thin-wall structures using the information-localizing technology[A],2015,701-709
Song M.,Zhang J.,Yu C.,Wang M.,Liu C.,Ying L..Experimental study on WEDM machining of PCD and PCBN compacts[J],Key Engineering Materials,2014,645:52-57
任宗金,张军,贾振元.Design and Calibration of a Cutting Force Dynamometer[A],The 5th International Conference on Manufacturing Science and Engineering,2014,945:2191-2194
张军,钱敏,康仁科,任宗金.Development of piezoelectric three-dimensional dynamometer for φ300mm wafer grinder[A],The 5th International Conference on Manufacturing Science and Engineering,2014,945:2017-2020
Zhang J.,Wang W.,Qian M.,Kang R.,Ren Z..Development of piezoelectric three-dimensional dynamometer for 300mm wafer grinder[A],2014,945-949:2017-2020
Gao S.,Ren Z.,Zhang J.,Shang Y.,Gao Y..Research on dynamic calibration of piezo-two-dimensional force sensor[J],Sensors and Transducers,2013,155(8):34-38
Ren Z.,Jia Z.,Zhang J.,Gao S.,Shang Y..Study on a method of dynamic response function for the piezoelectric measurement system[J],Sensors and Transducers,2013,153(6):111-117
Ren Z.,Jia Z.,Zhang J.,Shang Y.,Gao S..Research on the dynamic error and acceleration compensation for the piezoelectric sensor[J],Sensors and Transducers,2013,153(6):118-123
张军,杜昌雄,张学军,孙树江.压电式推力测试系统动态性能分析与改善[J],压电与声光,2012,34(6):936-939
Li, Ying-jun,Wang, Gui-cong,Zhang, Jun,Jia, Zhen-yuan.Dynamic characteristics of piezoelectric six-dimensional heavy force/moment sensor for large-load robotic manipulator[J],MEASUREMENT,2012,45(5):1114-1125
Ma, Fei,Zhang, Jun,Qian, Min,Xing, Qin.Study on the Influence Caused By Temperature to a Pulsed Thrust Test Stand for the Attitude Control Rocket Engine[A],International Workshop on Information and Electronics Engineering(IWIEE) / International Conference on Information, Computing andTelecommunications (ICICT),2012,29:194-200
张军,钱敏.Static Properties Research of Grinding Dynamometer for Wafer Grinder[A],Advanced Materials Research（Advances in Abrasive Technology XV）,2012,565:603-608
张军,刘建红,钱敏.高灵敏度深小孔压电钻削测力仪的研制[J],机械设计与制造,2011,9:81-83
张军,石欣,钱敏.换向器滚压加工过程监测系统[J],仪表技术与传感器,2011,4:107-110
房庆华,张军,李映君,贾振元,钱敏.轴用压电式六维大力值测力仪分载研究[J],仪器仪表学报,2011,32(2):439-444
Xing, Qin,Zhang, Jun,Qian, Min,Jia, Zhenyuan,Sun, Baoyuan.Design, calibration and error analysis of a piezoelectric thrust dynamometer for small thrust liquid pulsed rocket engines[J],MEASUREMENT,2011,44(2):338-344
张军,钱敏,贾振元.Design and optimization of a piezoelectric thrust-measuring platform for attitude-control rocket engines[J],Applied Mechanics and Materials,2011,44:1977-1981
Liu, Wei,Li, Ying-jun,Jia, Zhen-yuan,Zhang, Jun,Qian, Min.Research on parallel load sharing principle of piezoelectric six-dimensional heavy force/torque sensor[J],MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2011,25(1):331-343
Xing, Qin,Zhang, Jun,Qian, Min,Jia, Zhenyuan,Sun, Baoyuan.Design and Optimization of a Piezoelectric Thrust-measuring Platform for Attitude-control Rocket Engines[A],International Conference on Frontiers of Manufacturing and DesignScience (ICFMD2010),2010,44-47:1977-1981
张忠华,孙宝元,钱敏,张军.基于多次压电效应的自感知执行器研究[J],大连理工大学学报,2010,50(5):677-681
Xing, Qin,Zhang, Jun,Qian, Min,Jia, Zhen-yuan,Sun, Bao-yuan.Thrust stand for low-thrust liquid pulsed rocket engines[J],REVIEW OF SCIENTIFIC INSTRUMENTS,2010,81(9):095102
张见冈,张军,钱敏,李映君.压电石英六维力传感器的解耦研究[J],压电与声光,2010,32(3):395-398
贾振元,李映君,张军,钱敏,刘巍.并联式轴用压电六维力/力矩传感器[J],机械工程学报,2010,46(11):62-68
张军,周喜,钱敏,张忠华,石银辉.压电陶瓷在外力作用下的多次压电效应研究[J],压电与声光,2010,32(1):101-103
张军,李寒光,李映君,钱敏.压电式轴上六维力传感器的研制[J],仪器仪表学报,2010,31(1):73-77
贾振元,刘巍,张军.多维大力并联分载原理与传感器[A],2010
张军,钱敏,康仁科.A Novel Piezoelectric Grinding Dynamometer for Monitoring Ultra-precision Grinding of Silicon Wafers[A],Advanced Materials Research,2010,126:707-712
张军,钱敏,贾振元.Design, calibration and error analysis of a piezoelectric thrust dynamometer for small thrust liquid pulsed rocket engines[J],Measurement,2010,10(1):111-118
卢江跃,张军,钱敏.新型压电式车削测力仪[J],仪表技术与传感器,2009,12:32-34
任宗金,孙宝元,张军,钱敏.轨/姿控火箭发动机推力矢量动态测试系统测量原理与动态性能[J],航空学报,2009,30(11):2037-2044
Li, Ying-Jun,Zhang, Jun,Jia, Zhen-Yuan,Qian, Min,Li, Hanguang.Research on force-sensing element's spatial arrangement of piezoelectric six-component force/torque sensor[J],MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2009,23(8):2687-2698
Qu, G.J.,Qian, M.,Zhang, J.,Xing, Q..Investigation on unitary piezoelectric four-component cutting dynamometer[J],Materials Science Forum,2009,626 627:93-98
Zhang, Z. H.,Sun, B. Y.,Qian, M.,Zhang, J.,Shi, Y. H.,Zhou, X..An investigation of the tertiary coupling effect under the longitudinal mode of a piezoelectric crystal[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OFMECHANICAL ENGINEERING SCIENCE,2009,223(8):1777-1785
孙宝元,邢勤,张军,钱敏,曲国杰.小力值火箭发动机推力测量静态标定装置研制[J],大连理工大学学报,2009,49(4):526-530
Li, Ying-Jun,Zhang, Jun,Jia, Zhen-Yuan,Qian, Min.A novel piezoelectric 6-component heavy force/moment sensor for huge heavy-load manipulator's gripper[J],MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2009,23(5):1644-1651
卢江跃,孙宝元,张军,钱敏.YDC-Ⅲ89车削测力仪性能改进研究[J],传感器与微系统,2009,28(6):22-24
张忠华,孙宝元,钱敏,张军,石银辉,周喜.多次压电效应对压电力传感器静态特性的影响[J],压电与声光,2009,31(3):360-363
京公网安备 11010802027423号