近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
贺长波,李宏坤,赵新维,王维民,吴淑明.基于总体最小二乘准则旋转不变子空间法的叶尖定时欠采样信号分析[J],机械工程学报,2019,55(19):103-111
代月帮,李宏坤,周强,刘胜贤.基于增强型完全离散法的球头铣刀五轴加工稳定域建模方法研究[J],机械工程学报,2019,55(23):189-199
李宏坤,付井强,杨树华,王开宇.离心压缩机动静干涉信号特征识别方法[J],振动、测试与诊断,2019,39(5):1023-1029
Zhao, Xinwei,Zhou, Qiang,Yang, Shuhua,Li, Hongkun.Rotating Stall Induced Non-Synchronous Blade Vibration Analysis for an Unshrouded Industrial Centrifugal Compressor[J],SENSORS,2019,19(22)
李宏坤,张孟哲,郝佰田,张志新.基于切削电流系数的铣刀磨损状态监测[J],振动、测试与诊断,2019,39(4):713-719
王奉涛,邓刚,王洪涛,于晓光,韩清凯,李宏坤.基于EMD和SSAE的滚动轴承故障诊断方法[J],振动工程学报,2019,32(2):368-376
代月帮,李宏坤,魏兆成.考虑模态耦合的球头铣刀颤振稳定域建模方法[J],振动、测试与诊断,2019,39(3):525-530
李宏坤,郝佰田,代月帮,杨蕊.基于压缩感知和加噪堆栈稀疏自编码器的铣刀磨损程度识别方法研究[J],机械工程学报,2019,55(14):1-10
王洪涛,王奉涛,薛宇航,邓刚,李宏坤,韩清凯.基于单稳态随机共振的冲击信号自适应检测方法研究[J],机电工程,2019,36(9):913-918
杨蕊,李宏坤,王朝阁,郝佰田.利用FCKT以及深度自编码神经网络的滚动轴承故障智能诊断[J],机械工程学报,2019,55(7):65-72
王奉涛,刘晓飞,敦泊森,邓刚,韩清凯,李宏坤.基于萤火虫优化的核自动编码器在中介轴承故障诊断中的应用[J],机械工程学报,2019,55(7):58-64
He, Changbo,Niu, Pei,Yang, Rui,Wang, Chaoge,Li, Zhixiong,Li, Hongkun.Incipient rolling element bearing weak fault feature extraction based on adaptive second-order stochastic resonance incorporated by mode decomposition[J],MEASUREMENT,2019,145:687-701
Li, Hongkun,Wang, Chaoge,Hou, Mengfan,Yang, Rui,Tang, Daolong.Weak fault feature extraction of gear based on KVMD and singular value difference spectrum[A],2018,211
He, Changbo,Li, Hongkun,Li, Zhixiong,Zhao, Xinwei.An improved bistable stochastic resonance and its application on weak fault characteristic identification of centrifugal compressor blades[J],JOURNAL OF SOUND AND VIBRATION,2019,442:677-697
Yang, Rui,Li, Hongkun,Wang, Chaoge,He, Changbo.Rolling element bearing weak feature extraction based on improved optimal frequency band determination[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OFMECHANICAL ENGINEERING SCIENCE,2019,233(2):623-634
魏兆成,薛帅,李宏坤,赵明,杨澜.整体叶盘球头鼓锥形铣刀五轴加工技术[J],工具技术,2018,52(12):43-49
He, Changbo,Li, Hongkun,Zhao, Xinwei.Weak characteristic determination for blade crack of centrifugal compressors based on underdetermined blind source separation[J],MEASUREMENT,2018,128:545-557
李宏坤,周帅,魏兆成,赵明,代月帮.基于占能比的铣削加工颤振在线监测研究[J],振动、测试与诊断,2018,38(5):979-984
Wang, Fengtao,Deng, Gang,Liu, Chenxi,Su, Wensheng,Han, Qingkai,Li, Hongkun.A deep feature extraction method for bearing fault diagnosis based on empirical mode decomposition and kernel function[J],ADVANCES IN MECHANICAL ENGINEERING,2018,10(9)
唐道龙,李宏坤,王朝阁,侯梦凡,杨蕊.基于参数优化MCKD的行星齿轮箱微弱故障诊断研究[J],机电工程,2018,35(8):779-785
李宏坤,阚洪龙,魏兆成,赵明,代月帮.复杂曲面加工过程中铣刀在线监测方法[J],振动、测试与诊断,2018,38(4):658-665
Yang, Rui,Li, Hongkun,He, Changbo,Zhang, Zhixin.Rolling element bearing weak fault diagnosis based on optimal wavelet scale cyclic frequency extraction[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OFSYSTEMS AND CONTROL ENGINEERING,2018,232(7):895-908
李宏坤,崔明利,杨蕊,张志新,王奉涛.非下采样轮廓波变换在故障分类中的应用[J],振动、测试与诊断,2018,38(3):502-507
王奉涛,柳晨曦,张涛,敦泊森,韩清凯,李宏坤.基于k值优化VMD的滚动轴承故障诊断方法[J],振动、测试与诊断,2018,38(3):540-547
Dai, Yuebang,Li, Hongkun,Hao, Baitian.An improved full-discretization method for chatter stability prediction[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,96(9-12):3503-3510
Li, Hongkun,Yang, Rui,Wang, Chaoge,He, Changbo.Investigation on Planetary Bearing Weak Fault Diagnosis Based on a Fault Model and Improved Wavelet Ridge[J],ENERGIES,2018,11(5)
Dai, Yuebang,Li, Hongkun,Wei, Zhaocheng,Zhang, Haiyun.Chatter stability prediction for five-axis ball end milling with precise integration method[J],JOURNAL OF MANUFACTURING PROCESSES,2018,32:20-31
Dai, Yuebang,Li, Hongkun,Xing, Xinyu,Hao, Baitian.Prediction of chatter stability for milling process using precise integration method[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FORPRECISION ENGINEERING AND NANOTECHNOLOGY,2018,52:152-157
代月帮,魏兆成,李宏坤,张孟哲.基于接触区域的球头铣刀颤振稳定域预报方法研究[J],机械工程学报,2018,55(1):52-61
刘佳音,于晓光,王琦,李宏坤.基于Hankel矩阵与奇异值分解降噪方法的齿轮故障诊断研究[J],机床与液压,2018,46(1):158-162,172
Wang, Fengtao,Dun, Bosen,Liu, Xiaofei,Xue, Yuhang,Li, Hongkun,Han, Qingkai.An Enhancement Deep Feature Extraction Method for Bearing Fault Diagnosis Based on Kernel Function and Autoencoder[J],SHOCK AND VIBRATION,2018,2018
王奉涛,王贝,敦泊森,李宏坤,韩清凯,朱泓.改进Logistic回归模型的滚动轴承可靠性评估方法[J],振动、测试与诊断,2018,38(1):123-129
Wang, Fengtao,Liu, Xiaofei,Liu, Chenxi,Li, Hongkun,Han, Qingkai.Remaining Useful Life Prediction Method of Rolling Bearings Based on Pchip-EEMD-GM(1,1) Model[J],SHOCK AND VIBRATION,2018
李宏坤,阚洪龙,魏兆成.复杂曲面加工过程中铣刀在线监测方法[A],振动. 测试与诊断,2018,38(4):658-665
王凤利,邢辉,段树林,邱赤东,宋玉超,李宏坤.OEEMD与Teager能量算子结合的轴承故障诊断[J],振动、测试与诊断,2018,38(1):87-91
唐道龙,李宏坤.基于MCKD和快速谱峭度的行星齿轮箱故障诊断[A],2017,1-9
杨蕊,李宏坤,贺长波,王奉涛.利用最优小波尺度循环谱的滚动轴承早期故障特征提取[J],机械工程学报,2017,54(17):208-217
Wang, Fengtao,Liu, Chenxi,Su, Wensheng,Xue, Zhigang,Li, Hongkun,Han, Qingkai.Condition monitoring and fault diagnosis methods for low-speed and heavy-load slewing bearings: a literature review[J],JOURNAL OF VIBROENGINEERING,2017,19(5):3429-3444
Li, Hongkun,He, Changbo,Zhou, Qiang,Lu, Fuan.BLADE INCIPIENT CRACK DETERMINATION FOR CENTRIFUGAL COMPRESSOR BASED ON CWT-STOCHASTIC RESONANCE METHOD[A],ASME Turbo Expo: Turbine Technical Conference and Exposition,2017,7B-2017
李宏坤,贺长波,于刚,徐福健.利用稀疏盲源分离方法的叶片裂纹特征提取[J],振动工程学报,2017,30(3):510-518
王奉涛,陈旭涛,柳晨曦,李宏坤,韩清凯,朱泓.基于KPCA和WPHM的滚动轴承可靠性评估与寿命预测[J],振动、测试与诊断,2017,37(3):476-483
陈建国,王珍,李宏坤.SDICA方法在单通道信号故障分类中的研究[J],振动、测试与诊断,2017,37(2):256-260
Yang, Rui,Li, Hong-Kun,Tang, Dao-Long,Hou, Meng-Fan.Based on the optimal frequency band of maximum correlation kurtosis de-convolution for bearing weak fault diagnosis[A],2017 PROGNOSTICS AND SYSTEM HEALTH MANAGEMENT CONFERENCE (PHM-HARBIN),2017,422-426
王凤利,邢辉,邱赤东,段树林,李宏坤.基于改进自适应EEMD的柴油机气缸磨损诊断[J],内燃机学报,2017,35(1):89-95
Wang, Fengtao,Chen, Xutao,Liu, Chenxi,Yan, Dawen,Han, Qingkai,Li, Hongkun.Reliability assessment of rolling bearing based on principal component analysis and Weibull proportional hazard model[A],2017 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGYCONFERENCE (I2MTC),2017,1800-1805
李宏坤,周帅,张晓雯,李秀刚.不同类型扩压器对离心式压缩机结构振动与辐射噪声影响的试验研究[J],风机技术,2016,6:34-39,33
李宏坤,周帅,任远杰,丛明,赵鹏仕.基于铣削力仿真的稳定域叶瓣图构建[J],振动、测试与诊断,2016,36(6):1136-1141
Li, Hongkun,Zhou, Shuai,Kan, Honglong,Cong, Ming.Milling cutter condition reliability prediction based on state space model[J],JOURNAL OF VIBROENGINEERING,2016,18(7):4312-4328
李宏坤,杨蕊,任远杰,何德鲁,郭斌.利用粒子滤波与谱峭度的滚动轴承故障诊断[J],机械工程学报,2016,53(3):63-72
刘佳音,于晓光,金鹏飞,李宏坤.基于奇异值分解降噪方法的大型风机故障诊断研究[J],辽宁科技大学学报,2016,39(4):284-291
陈建国,王珍,李宏坤.基于相空间独立分量分析及峭度贡献系数的早期故障分析方法研究[J],振动与冲击,2016,35(12):155-159
Li, Hongkun,He, Changbo,Jiang, Daren,Wang, Xuejun.BLADE INCIPIENT CRACK DETERMINATION FOR CENTRIFUGAL COMPRESSOR BASED ON PRESSURE PULSATION SIGNAL FEATURE EXTRACTION[A],ASME Turbo Expo: Turbine Technical Conference and Exposition,2016,2D-2016
Li H.K.,Ren Y.J.,Yang R..Incipient feature extraction for rolling element bearing based on particle filter preprocessing and kurtogram[A],2016 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2016,2016,2016-July
李泳耀,丛明,廖忠情,孙宗余,李宏坤.机床热误差建模技术研究及试验验证[J],组合机床与自动化加工技术,2016,1:63-66,70
李宏坤,何德鲁,张志新,任远杰,丛明.基于状态空间模型的可靠性评估方法[J],振动与冲击,2016,35(1):118-124
李宏坤.Blind source separation for under-determined mixtures based on time-frequency analysis[A],Key Engineering Materials,2016,693:1350-1356
Li, H. K.,Ren, Y. J.,Yang, R..Incipient Feature Extraction for Rolling Element Bearing Based on Particle Filter Preprocessing and Kurtogram[A],IEEE International Instrumentation and Measurement Technology Conference(I2MTC),2016,703-708
Zhao, Peng-Fei,Liu, Yan,Li, Hong-Kun,Wang, Xiao-Fang,Yang, Jin-Guang.The effect of impeller-diffuser interactions on diffuser performance in a centrifugal compressor[J],ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS,2016,10(1):565-577
王奉涛,陈旭涛,闫达文,李宏坤,王雷,朱泓.流形模糊C均值方法及其在滚动轴承性能退化评估中的应用[J],机械工程学报,2015,52(15):59-64
丛明,李泳耀,孙宗余,李宏坤.机床温度测点优化方法研究及试验验证[J],大连理工大学学报,2015,55(6):582-588
贺长波,李宏坤,张晓雯.流体激振下叶片疲劳失效机理与检测方法综述[J],风机技术,2015,5:69-77
Li, Hongkun,Wang, Yinhu,Zhao, Pengshi,Zhang, Xiaowen,Zhou, Peilin.Cutting tool operational reliability prediction based on acoustic emission and logistic regression model[J],JOURNAL OF INTELLIGENT MANUFACTURING,2015,26(5):923-931
李宏坤,周帅,李秀刚,张晓雯.扩压器对离心式压缩机结构振动与辐射噪声影响的试验研究[A],2015第二届中国国际风机学术会议,2015,1-8
李宏坤,贺长波.流体激振下叶片疲劳失效机理与检测方法综述[A],2015第二届中国国际风机学术会议,2015,1-9
李宏坤,张晓雯,贺长波,徐福健,张学峰.利用随机共振的叶片裂纹微弱信息增强方法[J],机械工程学报,2015,52(1):94-101
李宏坤,赵鹏仕,李精忠,董雷.FV520B不锈钢铣削稳定叶瓣图的构建及实验[J],振动、测试与诊断,2015,35(4):722-726
李宏坤,徐福健,高巧红,汪寅虎.利用小波尺度谱同步平均的时频脊故障特征提取[J],振动工程学报,2015,28(3):487-494
Li, Hongkun,Zhang, Xiaowen,Liu, Yan,Xu, Fujian,Zhou, Shuai.INVESTIGATION ON ACOUSTIC RESONANCE FOR DIFFERENT DIFFUSER AND EFFECT ON CENTRIFUGAL COMPRESSOR PIPELINE FAILURE[A],ASME Turbo Expo: Turbine Technical Conference and Exposition,2015,2C
Li H.K.,Ren Y.J.,He D.L.,Cong M..Early fault feature determination for rolling element bearing based by using improved reassigned wavelet scalogram[A],2015 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2015,2015,2015-July:572-577
Li H.,Liu S.,Cong M..Reliability estimation based on moving average and state space model for rolling element bearing[J],International Journal of Performability Engineering,2015,11(3):243-256
李泳耀,丛明,罗孟然,李宏坤,杜黎清.MDH80加工中心铣削稳定性研究?[J],组合机床与自动化加工技术,2015,4:37-41,44
Li, Hongkun,Xu, Fujian,Liu, Hongyi,Zhang, Xuefeng.Incipient fault information determination for rolling element bearing based on synchronous averaging reassigned wavelet scalogram[J],MEASUREMENT,2015,65:1-10
罗孟然,丛明,顾齐芳,李泳耀,李宏坤.基于Cmk分析的加工中心精度稳定性评估?[J],组合机床与自动化加工技术,2015,3:149-153
Li, Hongkun,Lian, Xiaoting,Guo, Cheng,Zhao, Pengshi.Investigation on early fault classification for rolling element bearing based on the optimal frequency band determination[J],JOURNAL OF INTELLIGENT MANUFACTURING,2015,26(1):189-198
李宏坤.Reliability prediction method based on state space model for rolling element bearing[J],Journal of Shanghai Jiaotong University,2015,20(3):317-321
刘艳,李宏坤,王晓放.半开式离心压缩机内部流动及压力脉动分析[A],2015
王奉涛,闫达文,李宏坤,朱泓.流行模糊C均值方法及其在滚动轴承性能退化评估中的应用[J],机械工程学报,2015,15:59-64
Li, H. K.,Ren, Y. J.,He, D. L.,Cong, M..Early Fault Feature Determination for Rolling Element Bearing Based by Using Improved Reassigned Wavelet Scalogram[A],32nd Annual IEEE International Instrumentation and MeasurementTechnology Conference (I2MTC),2015,572-577
李宏坤,张晓雯,张学峰,杨树华.离心式压缩机压力脉动产生原因与作用机理[J],风机技术,2014,56(5):17-22
Li, Hongkun,Zhang, Xiaowen,He, Delu,Zhou, Peilin.An investigation into frequency resolution estimation model for impact signal analysis by using Hilbert spectrum and condition classification for marine diesel engine[J],JOURNAL OF VIBROENGINEERING,2014,16(6):2874-2893
京公网安备 11010802027423号