近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Liu, Heng,Hong, Jie,Ruan, Shilun,Li, Zheng,Cheng, Gengdong.A Model accounting for Stiffness Weakening of Curvic Couplings under Various Loading Conditions[J],MATHEMATICAL PROBLEMS IN ENGINEERING,2020,2020
[2]常旭阳,王新宇,李征,谷俊峰,阮诗伦,申长雨.聚醚醚酮物理老化行为与成型模拟[J],高分子材料科学与工程,2019,35(10):131-137
[3]Yu, Minghao,Ruan, Shilun,Wang, Xinyu,Li, Zheng,Shen, Changyu.Topology optimization of thermal-fluid problem using the MMC-based approach[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2019,60(1):151-165
[4]Li, Zheng,Wang, Xinyu,Ruan, Shilun,Li, Zhaojun,Shen, Changyu,Zeng, Yan.A modified hypervolume based expected improvement for multi-objective efficient global optimiza...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2018,58(5):1961-1979
[5]Fang, Haidong,Wang, Xinyu,Gu, Junfeng,Li, Zheng,Ruan, Shilun,Shen, Changyu.A novel crystallization kinetics model of transcrystalline used for crystallization behavior si...[J],POLYMER ENGINEERING AND SCIENCE,2019,59(4):854-862
[6]Yu, Wenqian,Ruan, Shilun,Li, Zheng,Shen, Changyu,Chen, Biaosong,Gu, Junfeng,Wang, Xinyu.Effect of injection velocity on the filling behaviors of microinjection-molded polylactic acid ...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,103(5-8):2929-2940
[7]Liu, Wenjuan,Wang, Xinyu,Li, Zheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu,Wang, Xicheng.Integration optimization of molding and service for injection-molded product[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,84(9-12):2019-2028
[8]Chang, Baoning,Wang, Xinyu,Long, Zhiqiang,Li, Zheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu.Constitutive modeling for the accurate characterization of the tension behavior of PEEK under s...[J],POLYMER TESTING,2018,69:514-521
[9]张黎,王新宇,李征,谷俊峰,阮诗伦,申长雨.熔融沉积3D打印材料粘接强度及模量预测研究[J],化工学报,2019,70(7):2727-2736
[10]Gong, Wenzheng,Wang, Xinyu,Li, Zheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu.A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion...[J],HIGH PERFORMANCE POLYMERS,2019,31(8):948-958
[11]李红霞,付旭,王敏杰,李征,李召军.汽轮发电机基础动力特性分析及优化设计[J],应用力学学报,2018,35(1):178-184
[12]Li, Zheng,Wang, Xinyu,Gu, Junfeng,Ruan, Shilun,Shen, Changyu,Lyu, Yan,Zhao, Yang.Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,94(1-4):1041-1059
[13]Wang, Xinyu,Li, Zheng,Li, Hongxia,Ruan, Shilun,Gu, Junfeng.Influence of nanoscale surface curvature of rutile on fibronectin adsorption by atomistic simul...[J],JOURNAL OF MATERIALS SCIENCE,2017,52(23):13512-13521
[14]肖博升,王新宇,李征,谷俊峰,阮诗伦,申长雨.基于修正Archard模型的聚醚醚酮磨损数值模拟[J],工程塑料应用,2017,45(9):88-92,104
[15]Wang, Xinyu,Li, Hongxia,Gu, Junfeng,Li, Zheng,Ruan, Shilun,Shen, Changyu,Wang, Minjie.Pressure Analysis of Dynamic Injection Molding and Process Parameter Optimization for Reducing ...[J],POLYMERS,2017,9(3)
[16]Li, Hongxia,Wang, Minjie,Zhao, Danyang,Qiao, Aike,Liu, Yahua,Wang, Xinyu,Wei, Yunbo,Liu, Tao,Gu, Junfeng,Li, Zheng.Multi-Objective Optimizations of Biodegradable Polymer Stent Structure and Stent Microinjection...[J],POLYMERS,2017,9(1)
[17]李宗蔚,任梦柯,宋贝贝,阮诗伦,李征,王新宇.基于Fluent的三维注塑充填界面追踪方法研究[J],塑料工业,2016,44(12):28-32,45
[18]Wang, Hong,Wang, Xicheng,Li, Zheng,Li, Keqiu.Kriging-Based Parameter Estimation Algorithm for Metabolic Networks Combined with Single-Dimens...[J],IEEE-ACM TRANSACTIONS ON COMPUTATIONAL BIOLOGY AND BIOINFORMATICS,2016,13(6):1142-1154
[19]Li, Zheng,Ruan, Shilun,Gu, Junfeng,Wang, Xinyu,Shen, Changyu.Investigation on parallel algorithms in efficient global optimization based on multiple points ...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(4):747-773
[20]Wang, Xinyu,Li, Zheng,Gu, Junfeng,Shen, Changyu,Wang, Xicheng,Ruan, Shilun.Reducing service stress of the injection-molded polycarbonate window by optimizing mold constru...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,86(5-8):1691-1704
[21]王新宇,李征,谷俊峰,阮诗伦,申长雨,王希诚.工程用高聚物注塑成型制品服役应力优化设计[J],化工学报,2016,67(7):3040-3046
[22]王新宇,李征,谷俊峰,阮诗伦,申长雨.Reducing service stress of the injection molded polycarbonate window by optimizing mold construct...[J],The International Journal of Advanced Manufacturing Technology,2016,86(5):1691-1704
[23]Zhao, Jian,Cheng, Gengdong,Ruan, Shilun,Li, Zheng.Multi-objective optimization design of injection molding process parameters based on the improv...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,78(9-12):1813-1826
[24]Li, Zhaojun,Wang, Xinyu,Wang, Xicheng,Li, Keqiu,Li, Zheng.A Kriging based forecasting and scheduling system for scientific computing cloud applications[J],International Journal of Grid and Distributed Computing,2015,8(3):227-244
[25]李召军,李征,王希诚,李克秋.一种汽轮机基础的并行多目标优化方法[J],大连理工大学学报,2015,55(3):229-235
[26]王晓阳,武金瑛,李超,李征,谷俊峰,王希诚,陈飙松.结构极限与安定分析中温度参数法的改进[J],应用数学和力学,2015,S1:98-106
[27]李召军,李征,王希诚,李克秋.基于Kriging代理模型的动态云任务调度方法[J],计算机工程与应用,2015,51(16):30-35,76
[28]刘文娟,王新宇,李征,谷俊峰,王希诚,申长雨.基于Kriging代理模型的注塑件残余应力优化分析[J],塑料工业,2015,43(1):53-57
[29]李征,谷俊峰,阮诗伦.面向服役的高聚物注塑成型应力优化设计[A],2015
[30]李征,谷俊峰,阮诗伦,王希诚.Integration optimization of molding and service for injection-molded product[J],The International Journal of Advanced Manufacturing Technology,2015,0(0):0-0
[31]李征,谷俊峰,阮诗伦,王希诚.Reducing service stress of the injection-molded polycarbonate window by optimizing mould construc...[J],The International Journal of Advanced Manufacturing Technology,2015,0(0):1-10
[32]刘文娟,王新宇,李征,谷俊峰,王希诚,申长雨.基于Kriging代理模型的注塑制品成型中的残余应力优化[A],2014,142-146
[33]李征,武金瑛,谷俊峰,陈飙松,王希诚.基于改进的温度参数法的结构极限与安定分析[A],2014
[34]Li Z.,Wang X..Global optimization based on weighting-integral expected improvement[A],2012,630:383-388
京公网安备 11010802027423号