近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Liu, Da,Bai, Ruixiang,Lei, Zhenkun,Guo, Jingjing,Zou, Jianchao,Wu, Wen,Yan, Cheng.Experimental and numerical study on compression-after-impact behavior of composite panels with foam-filled hat-stiffener[J],OCEAN ENGINEERING,2020,198
[2]Bai, Ruixiang,Ma, Yu,Lei, Zhenkun,Feng, Yang,Liu, Da,Yan, Cheng.Impact resistance analysis of flexible fabric by 3D shape of impact basin in low-speed impact test[J],POLYMER TESTING,2020,81
[3]Bai, Ruixiang,Ma, Yu,Lei, Zhenkun,Feng, Yang,Zou, Jianchao,Liu, Da.Shear deformation and energy absorption analysis of flexible fabric in yarn pullout test[J],COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,2020,128
[4]Liu, Jingyu,Bai, Ruixiang,Lei, Zhenkun,Xu, Chun,Ye, Qingsong,Martens, Wayde,Yarlagadda, Prasad K. D. V.,Yan, Cheng.Experimental and numerical investigation of the toughening mechanisms in bioinspired composites prepared by freeze casting[J],COMPOSITES SCIENCE AND TECHNOLOGY,2019,182
[5]Chu, Qiaoling,Xu, Shuai,Zhu, Xiaofei,Zhu, Zhengwang,Zhang, Haifeng,Bai, Ruixiang,Lei, Zhenkun,Yan, Cheng.Effects of testing conditions on the deformation behaviour of a Ti-based bulk metallic glass[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2019,766
[6]马宇,雷振坤,冯洋,白瑞祥.剪切增稠液改性软织物的单纱拉出测试研究[J],实验力学,2019,34(4):563-573
[7]Wu, W.,Bai, R. X.,Lei, Z. K.,Geng, C. H.,Zhang, X. Z.,Peng, K. W.,Guo, J. J.,Ma, Y..Buckling analysis of stiffened composite panels with variable stiffness[A],2019,504(1)
[8]Zhang, X. Z.,Bai, R. X.,Lei, Z. K.,Zhu, Y. G.,Geng, C. H.,Feng, Y.,Zhong, Z.,Wu, W..Study on tensile properties of composite laminates with gap defects[A],2019,504(1)
[9]Zheng, Z.,Bai, R. X.,Lei, Z. K.,Zhu, Y. G.,Zhang, X. Z..Failure analysis of variable-stiffness laminate considering manufacturing defects[A],2019,504(1)
[10]秦福勇,雷振坤,马宇,白瑞祥,房庆超,刘达.织物顶出测试中纱线应力传递模型的拉曼研究[J],实验力学,2019,34(2):183-190
[11]Bai, Ruixiang,Ma, Yu,Lei, Zhenkun,Feng, Yang,Liu, Chen.Energy analysis of fabric impregnated by shear thickening fluid in yarn pullout test[J],COMPOSITES PART B-ENGINEERING,2019,174
[12]白瑞祥,佟凯旋,刘琛.自动铺丝变刚度加筋板结构承载能力分析[J],哈尔滨工程大学学报,2018,08:1-8
[13]欧红旗,林仁邦,朱景忠,陈鸣亮,白瑞祥.一种航天器错频设计的工程优化方法[J],大连工业大学学报,2018,37(6):484-488
[14]王彩英,白瑞祥,雷振坤.工字型加筋复合材料壁板的压缩屈曲行为实验研究[J],实验力学,2018,33(5):725-733
[15]雷振坤,Fuyong Qin,Qingchao Fang,白瑞祥,Wei Qiu,Xiaogang Chen.Full-field fabric stress measurement using micro Raman spectroscopy in yarn push-out test[J],Applied Optics,2018,57(4):924-932
[16]白瑞祥,Chen Liu,雷振坤,Cheng Yan.Virtual testing method on graphite fiber/resin single-filament-composite test[J],Composite Interfaces,2018,1-19
[17]Geng ChunHui,白瑞祥,雷振坤,Wu Wen.The effect of tear straps on compressive carrying capacity of composite omega single-stringers[A],IOP Conference Series Materials Science and Engineering,2018,397(1):12144-12144
[18]Jingjing Guo,雷振坤,Yang Chen,白瑞祥.Study on low-velocity impact and compression failure of composite foam sandwich panel[A],2018 International Conference on Modeling, Simulation and Optimization (MSO),2018,474-478
[19]Kewang Peng,雷振坤,白瑞祥,Wen Wu,Da Liu. Study on 180o peel test of interface adhesive honeycomb sandwich structure[A],2018 International Conference on Modeling, Simulation and Optimization (MSO),2018,479-483
[20]Yang Feng,Yu Ma,雷振坤,Saisai Cao,Qingchao Fang,Weikang Li,白瑞祥.Experimental study on yarn pullout test of STF modified fabric[A],IOP Conference Series: Materials Science and Engineering,2018,381:12111-12111
[21]Chu, Qiaoling,Bai, Ruixiang,Zhang, Min,Li, Jihong,Lei, Zhenkun,Hu, Ning,Bell, John M.,Yan, Cheng.Microstructure and mechanical properties of titanium/steel bimetallic joints[J],MATERIALS CHARACTERIZATION,2017,132:330-337
[22]彭可望,白瑞祥,武文,刘达,雷振坤.胶接蜂窝夹层结构的界面剥离实验与数值研究[A],第三届中国国际复合材料科技大会,2017,1
[23]耿春晖,白瑞祥,武文,雷振坤.基于广义强度准则的复合材料承载能力分析[A],第三届中国国际复合材料科技大会,2017,2
[24]郭静静,白瑞祥,陈洋,雷振坤.复合材料泡沫夹层板低速冲击和压缩失效研究[A],第三届中国国际复合材料科技大会,2017,1
[25]武文,白瑞祥,刘琛,雷振坤.变刚度复合材料层合板的后屈曲性态研究[A],第三届中国国际复合材料科技大会,2017,1
[26]白瑞祥,田辰光,郭振飞.含分层损伤复合材料分层扩展屈曲研究[A],中国力学大会-2017暨庆祝中国力学学会成立60周年大会,2017,11
[27]王蔓,白瑞祥.含压电层复合材料梁强化模拟[J],机械工程师,2017,6:17-18
[28]Bai, Ruixiang,Lei, Zhenkun,Wei, Xiao,Tao, Wang,Yan, Cheng.Numerical and experimental study of dynamic buckling behavior of a J-stiffened composite panel under in-plane shear[J],COMPOSITE STRUCTURES,2017,166:96-103
[29]Bai, Ruixiang,Jiang, Hao,Lei, Zhenkun,Li, Weikang.A novel 2nd-order shape function based digital image correlation method for large deformation measurements[J],OPTICS AND LASERS IN ENGINEERING,2017,90:48-58
[30]Bai, R. X.,Guo, Z. F.,Lei, Z. K..Prediction of Welding Deformation and Residual Stress of Stiffened Plates Based on Experiments[A],1ST INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND MECHANICAL ENGINEERING,2017,281(1)
[31]Fang, Q. C.,Lei, Z. K.,Qin, F. Y.,Li, W. K.,Bai, R. X..Study on Single-yarn Pullout Test of Ballistic Resistant Fabric under Different Preloads[A],1ST INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND MECHANICAL ENGINEERING,2017,281(1)
[32]Chen, Y.,Lei, Z. K.,Bai, R. X.,Wei, Y. P.,Tao, W..Study on Elastoplastic Crack Propagation Behavior of Laser-welded 6061 Aluminum Alloy Using Digital Image Correlation Method[A],1ST INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND MECHANICAL ENGINEERING,2017,281(1)
[33]Lai, Zheng Bo,Bai, Ruixiang,Yan, Cheng.Effect of nano-scale constraint on the mechanical behaviour of osteopontin-hydroxyapatite interfaces[J],COMPUTATIONAL MATERIALS SCIENCE,2017,126:59-65
[34]Lei, Zhenkun,Bai, Ruixiang,Tao, Wang,Wei, Xiao,Leng, Ruijiao.Optical measurement on dynamic buckling behavior of stiffened composite panels under in-plane shear[J],OPTICS AND LASERS IN ENGINEERING,2016,87:111-119
[35]唐杰,张修科,李新宽,韩涵,白瑞祥.温度对包带式星箭连接分离装置预紧力的影响研究[J],大连工业大学学报,2016,35(6):494-498
[36]Lei, Zhenkun,Wang, Yunfeng,Qin, Fuyong,Qiu, Wei,Bai, Ruixiang,Chen, Xiaogang.Multi-fiber strains measured by micro-Raman spectroscopy: Principles and experiments[J],OPTICS AND LASERS IN ENGINEERING,2016,77:8-17
[37]雷振坤,白瑞祥.Numerical and experimental study on stability of aluminum alloy riveted and stiffened panels under in-plane shear[A],2016
[38]雷振坤,白瑞祥.Experiment study on yarn friction slip in yarn pull-out test[A],2016
[39]白瑞祥,雷振坤.Inverse method to determine the interface stress in double lap adhesive bonded joint[A],The 12th World Congress on Computational Mechanics (WCCMⅫ) & The 6th Asia-Pacific Congress on Computational Mechanics,2016
[40]白瑞祥,雷振坤.A chainlike digital image correlation method for measuring small deformation[A],The 12th World Congress on Computational Mechanics (WCCMⅫ) & The 6th Asia-Pacific Congress on Computational Mechanics,2016
[41]韦啸,白瑞祥,雷振坤,暴双华.J型筋复合材料加筋板的剪切实验与数值分析[A],2015中国力学大会,2015,58-58
[42]暴双华,白瑞祥,雷振坤,韦啸,刘琛.基于光测数据的复合材料单搭接胶接接头界面应力反演研究[A],2015中国力学大会,2015,54-54
[43]郑权,韩涵,唐杰,张卫东,白瑞祥,雷振坤.含胶接缺陷的椭球泡沫夹层结构破坏机理与承载能力研究[J],实验力学,2015,30(2):207-214
[44]白瑞祥.The failure mechanism of composite sandwich structure with stringer reinforcement[A],中国力学大会,2015
[45]刘云飞,吕军,白瑞祥,高效伟.计算曲面壳体等效节点热载荷的新方法[J],力学学报,2015,47(2):328-336
[46]Liu, Xingyu,Han, Kecen,Bai, Ruixiang,Lei, Zhenkun,Wang, Hai.Buckling measurement and numerical analysis of M-type ribs stiffened composite panel[J],THIN-WALLED STRUCTURES,2014,85:117-124
[47]童瑶,白瑞祥,刘衰财,黄宝昌.复合材料盒段弯曲试验与数值研究[J],大连工业大学学报,2014,01:58-62
[48]白瑞祥.Numberical Analysis for the Inter layer Thoughening of Piezoelectric Smart Composite Plate[J],POLYMERS & POLYMER COPOSITES,2014,22(2):193-201
[49]Lei Zhenkun,Bai Ruixiang,Qiu Wei,Deng Libo,Huang Bochang.Flexural effects of sandwich beam with core junctions under in-plane bending[J],OPTICS AND LASERS IN ENGINEERING,2014,52(1):131-139
[50]白瑞祥,王亮,陈浩然.含界面裂纹的压电智能梁断裂分析[J],哈尔滨工程大学学报,2013,34(11):1427-1431
[51]Wang, Mingchao,Yan, Cheng,Galpaya, Dilini,Lai, Zheng Bo,Ma, Lin,Hu, Ning,Yuan, Qiang,Bai, Ruixiang,Zhou, Limin.Molecular Dynamics Simulation of Fracture Strength and Morphology of Defective Graphene[J],JOURNAL OF NANO RESEARCH,2013,25:181-187
[52]Qu, Shen,Chen, Hao-Ran,Bai, Rui-Xiang,Li, Sheng.Adaptive integration technique for nearly singular integrals in near-field acoustics boundary element analysis[J],WIT Transactions on Modelling and Simulation,2013,56:353-363
[53]白瑞祥,王亮,陈浩然.力电冲击荷载下PZT/复合材料梁界面断裂分析[J],大连理工大学学报,2013,53(5):625-629
[54]Wang, Man,Bai, Ruixiang,Zhou, Maojun.Finite Element Model and Bending for Marine Composite Flexible Pipes[A],4th International Conference on Manufacturing Science and Engineering (ICMSE 2013),2013,690-693:314-+
[55]石冶金,白瑞祥,王晓平,陈保兴.J型加筋壁板结构轴压试验及承载能力数值预测[J],工程力学,2013,30(2):413-418
[56]白瑞祥.Tensile test of composite laminates and specimens improvement[A],2013,738(无):73-77
[57]白瑞祥,雷振坤.复合材料格栅加筋板屈曲试验及有限元分析[J],东北大学学报,2013,34(2):224-228
[58]Wang, Liang,Bai, Rui-xiang,Chen, Haoran.Analytical modeling of the interface crack between a piezoelectric actuator and an elastic substrate considering shear effects[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2013,66:141-148
[59]王蔓,白瑞祥,李明颖,沈亚南.含温湿效应的复合材料风机叶片的破坏[J],大连工业大学学报,2012,06:461-464
[60]Lei Zhenkun,Bai Ruixiang,Qiu Wei,Zhan Lechang.Optical evaluation of the buckling behavior of stiffened composite laminates[J],COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,2012,43(11):1850-1859
京公网安备 11010802027423号