当前位置: X-MOL首页全球导师 国内导师 › 李伟东

个人简介

教育经历 2002.92007.4 大连理工大学固体力学博士 1994.91998.7 大连理工大学工程力学学士 工作经历 2012.12至今 大连理工大学汽车工程学院副教授 2007.92012.11 大连理工大学汽车工程学院讲师 1998.82000.5 吉林省光宇延边蓄电池有限公司设计员

研究领域

汽车轻量化 智能车辆 人工智能

近期论文

查看导师最新文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

郑国君.Effect of spew fillet on adhesively bonded single lap joints with CFRP and aluminum-alloy immer...[J],INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES,2022,99 杜宇.Effect of vibration fatigue on modal properties of single lap adhesive joints[A],the 2nd International Conference on Structural Adhesive Bonding (AB2013),2022 韩啸.Experimental and modelling study on the strength degradation of adhesive joints after long-term s...[A],13th International Triennial Conference on the Science and Technology of Adhesion and Adhesives,2022 李伟东.Experimental and numerical analysis on fatigue durability of single-lap joints under vibration ...[J],JOURNAL OF ADHESION,2022,93(3):187-203 胡平.Experimental and numerical analysis on load capacity and failure process of T-joint: Effect pro...[J],INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES,2022,38:17-24 Pang, Jian.Fatigue Analysis of Adhesive Joints Under Vibration Loading[J],JOURNAL OF ADHESION,2022,89(12):899-920 李伟东.FATIGUE ANALYSIS OF ADHESIVELY BONDED SINGLE LAP JOINTS UNDER VIBRATION LOADS[A],24th Conference on Mechanical Vibration and Noise,2022,1(PARTS A AND B):389-+ 胡平.Investigation on the Load Capacity and Failure Process of T-joint by Experiments and Numerical Me...[J],Advanced Material Research,2022,328(2011):1317-1321 杜宇.Lightweight design analysis based on a coupled structural acoustic model for rectangular enclosur...[A],ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012, NCAD 2012,2022,309-318 杜宇.LIGHTWEIGHT DESIGN ANALYSIS BASED ON A COUPLED STRUCTURAL-ACOUSTIC MODEL FOR RECTANGULAR ENCLOS...[A],Internoise/ASME 2012 Noise Control and Acoustics Division Conference,2022,309-+ 李伟东.Temperature degradation of CFRP and steel bonded structures[A],the 2nd International Conference on Structural Adhesive Bonding 2013,2022 李伟东.The effect of constant loading on the mechanical behavior of bulk adhesive[J],JOURNAL OF ADHESION,2022,93(12):993-1007 韩小强.The Effect of a Hot-Wet Environment on Adhesively Bonded Joints Under a Sustained Load[J],JOURNAL OF ADHESION,2022,90(5-6,SI):420-436 李伟东.Vibration analysis of single lap adhesive joint with non-uniform adhesive thickness: Experimental...[J],Advanced Material Research,2022,418(2011):1312-1319 Pang, Jian.An Energy Conservation Algorithm for Nonlinear Dynamic Equation[J],Journal of Applied Mathematics,2022,2012 祝雪峰.A new surface parameterization method based on one-step inverse forming for isogeometric analys...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,65(9-12):1215-1227 李伟东.An Iteration Method for Single-Degree-of-Freedom Nonlinear Dynamical Equation[J],Advances in Vibration Engineering,2022,7(3):217-226 郑国君.Mechanical behavior of AL/CFRP single-lap joint subjected to combined thermal and constant loadin...[J],JOURNAL OF ADHESION,2022 郑国君.Mechanical behavior of AL/CFRP single-lap joint subjected to combined thermal and constant load...[J],JOURNAL OF ADHESION,2022,97(4):361-379 杜宇.Modeling of frequency responses for arbitrary earphone designs[A],161st Meeting Acoustical Society of America 2011,2022,12 李伟东.Predicting the Strength of Adhesively Bonded T-joints Under Cyclic Temperature using a Cohesive...[J],JOURNAL OF ADHESION,2022,92(11):892-907 胡平.Research on the static strength performance of adhesive single lap joints subjected to extreme ...[J],INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES,2022,41:119-126 厉龙.Shear Strength Prediction of Single Lap Joints Based on Latin Hypercube Method[A],2nd International Conference on Engineering Design and Optimization (ICEDO 2011),2022,102-102:681-+ 胡平.Shear Strength Prediction of Single Lap Joints Based on Latin Hypercube Method[J],Applied Mechanics and Materials,2022,101(2011):681-684 胡平.Specimen geometry influence on the tensile fracture toughness of a structural[A],the 2nd International Conference on Structural Adhesive Bonding 2013,2022 胡平.Strength Degradation of Adhesively Bonded Single-Lap Joints in a Cyclic-Temperature Environment...[J],JOURNAL OF ADHESION,2022,91(8):587-603 胡平.Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive z...[J],INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES,2022,41:6-15 李伟东.Strength Prediction of Adhesively Bonded Single Lap Joints Under Salt Spray Environment Using a...[J],JOURNAL OF ADHESION,2022,92(11):916-937 郑国君.Mechanical behavior of AL/CFRP single-lap joint subjected to combined thermal and constant load...[J],JOURNAL OF ADHESION,2021,97(4):361-379 胡平.Effect of Temperature on Shear Strength of Adhesively Bonded Joints for Automobile Industry[A],2nd International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011),2012,418-420:1259-+ 胡平.Effect of Temperature on Shear Strength of Adhesively Bonded Joints for Automobile Industry[J],Advanced Material Research,2012,328(2011):1259-1265 李伟东.Experimental and numerical analysis on fatigue durability of single-lap joints under vibration lo...[A],the 2nd International Conference on Structural Adhesive Bonding 2013,2013 张军.矩形封闭声腔壁板轻量化对声固耦合特性的影响[J],声学学报,2014,39(1):59-67 韩啸.结构胶接接头在湿-热-力耦合环境下的力学性能退化行为建模研究[A],2015中国力学大会,2015,149-149 胡平.考虑汽车车身涂装工艺影响的非平衡胶接接头强度[J],机械工程学报,2012,20:93-102 胡平.考虑汽车车身涂装工艺影响的非平衡胶接接头强度研究[J],机械工程学报,2012,48(11):93-102 杜宇.自适应降噪麦克风壳体声学有限元分析与设计[J],声学技术,2013,2:129-135 韩啸.长期盐雾老化环境下胶接接头强度退化试验和仿真研究(英文)[A],2016中国国际粘接技术大会,2016,7 李伟东.非线性多自由度转子系统精细数值积分[J],振动工程学报,2004,4:427-432 韩啸.非平衡胶接接头循环温度场强度退化研究[J],机械工程学报,2012,18:97-103 胡平.非平衡胶接接头极端温度环境强度退化研究[A],2012中国汽车轻量化技术研讨会论文集中国汽车工程学会,2012,430-437 李伟东.周期激励下单搭接接头强度与振动特性研究[J],计算力学学报,2014,4:446-452 李伟东.基于多体动力学递推算法的电动汽车建模与仿真分析[J],计算力学学报,2012,29(3):357-362 李伟东.基于粘结算法的电动汽车建模与仿真[J],华南理工大学学报 自然科学版,2022,12:92-98 李伟东.多自由度非线性动力学方程的能量校准算法[J],力学学报,2022,3:356-364 裘春航.旋转机械系统多自由度非线性动力学数值分析[J],计算力学学报,2022,4:392-398 Li, W. D.,Tang, L. P.,Han, X.,Gao, E. P..The effect of constant loading on the mechanical behavior of bulk adhesive[J],JOURNAL OF ADHESION,2017,93(12):993-1007 Li, Weidong,Pang, Bo,Han, Xiao,Tang, Liping,Zhao, Kunmin,Hu, Ping.Predicting the Strength of Adhesively Bonded T-joints Under Cyclic Temperature using a Cohesive...[J],JOURNAL OF ADHESION,2016,92(11):892-907 Li, W. D.,Ma, M.,Han, X.,Tang, L. P.,Zhao, J. N.,Gao, E. P..Strength Prediction of Adhesively Bonded Single Lap Joints Under Salt Spray Environment Using a...[J],JOURNAL OF ADHESION,2016,92(11):916-937 韩啸,李伟东,胡平.Experimental and modelling study on the strength degradation of adhesive joints after long-term s...[A],2016 韩啸,李伟东,胡平,侯文彬.结构胶接接头在湿-热-力耦合环境下的力学性能退化行为建模研究[A],2015,149-149 Hu, P.,Shi, Z. W.,Wang, X. X.,Li, W. D.,Zhou, S. G.,Han, X..Strength Degradation of Adhesively Bonded Single-Lap Joints in a Cyclic-Temperature Environment...[J],JOURNAL OF ADHESION,2015,91(8):587-603 Han, X.,Crocombe, A. D.,Anwar, S. N. R.,Hu, P.,Li, W. D..The Effect of a Hot-Wet Environment on Adhesively Bonded Joints Under a Sustained Load[J],JOURNAL OF ADHESION,2014,90(5-6,SI):420-436 张军,杜宇,李伟东,赵京南.矩形封闭声腔壁板轻量化对声固耦合特性的影响[J],声学学报,2014,39(1):59-67 Pang, Jian,Du, Yu,Wu, Kunyue,Hu, Ping,Li, Weidong.Fatigue Analysis of Adhesive Joints Under Vibration Loading[J],JOURNAL OF ADHESION,2013,89(12):899-920 杜宇,李伟东.自适应降噪麦克风壳体声学有限元分析与设计[J],声学技术,2013,32(2):129-135 Hu, P.,Han, X.,da Silva, L. F. M.,Li, W. D..Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive z...[J],INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES,2013,41:6-15 Hu, P.,Han, X.,Li, W. D.,Li, L.,Shao, Q..Research on the static strength performance of adhesive single lap joints subjected to extreme ...[J],INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES,2013,41:119-126 李伟东,胡平.Temperature degradation of CFRP and steel bonded structures[A],2013 胡平,李伟东.Specimen geometry influence on the tensile fracture toughness of a structural[A],2013 李伟东,胡平.Experimental and numerical analysis on fatigue durability of single-lap joints under vibration lo...[A],2013 杜宇,李伟东.Effect of vibration fatigue on modal properties of single lap adhesive joints[A],2013 李伟东,胡永明,胡平,韩小强,张军.基于粘结算法的电动汽车建模与仿真[J],华南理工大学学报(自然科学版),2012,40(12):92-98 胡平,韩啸,李伟东,施志伟,周申光.考虑汽车车身涂装工艺影响的非平衡胶接接头强度[J],机械工程学报,2012,48(20):93-102 Hu, Ping,Shao, Qi,Li, Weidong,Han, Xiao.Experimental and numerical analysis on load capacity and failure process of T-joint: Effect pro...[J],INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES,2012,38:17-24 韩啸,李伟东,胡平.非平衡胶接接头循环温度场强度退化研究[J],机械工程学报,2012,48(18):97-103 胡平,韩啸,李伟东.非平衡胶接接头极端温度环境强度退化研究[A],2012,430-437 Du Y.,Zhang J.,Li W.,Hu P..Lightweight design analysis based on a coupled structural acoustic model for rectangular enclosur...[A],2012,309-318 Li, Weidong,Wu, Kunyue,Du, Yu,Pang, Jian,Hu, Ping.FATIGUE ANALYSIS OF ADHESIVELY BONDED SINGLE LAP JOINTS UNDER VIBRATION LOADS[A],2012,1(PARTS A AND B):389-+ 李伟东,胡永明,韩小强,汪镇涛.基于多体动力学递推算法的电动汽车建模与仿真分析[J],计算力学学报,2012,29(3):357-362 胡平,李伟东.Effect of Temperature on Shear Strength of Adhesively Bonded Joints for Automobile Industry[J],Advanced Material Research,2012,328(2011):1259-1265 胡平,李伟东.Shear Strength Prediction of Single Lap Joints Based on Latin Hypercube Method[J],Applied Mechanics and Materials,2012,101(2011):681-684 李伟东,胡平.Vibration analysis of single lap adhesive joint with non-uniform adhesive thickness: Experimental...[J],Advanced Material Research,2012,418(2011):1312-1319 胡平,李伟东.Investigation on the Load Capacity and Failure Process of T-joint by Experiments and Numerical Me...[J],Advanced Material Research,2012,328(2011):1317-1321 胡平,李伟东.考虑汽车车身涂装工艺影响的非平衡胶接接头强度研究[J],机械工程学报,2012,48(11):93-102 Pang, Jian,Du, Yu,Hu, Ping,Li, Weidong,Ma, Z. D..An Energy Conservation Algorithm for Nonlinear Dynamic Equation[J],JOURNAL OF APPLIED MATHEMATICS,2012,2012 Du Y.,Li W..Modeling of frequency responses for arbitrary earphone designs[A],2011,12 李伟东.An Iteration Method for Single-Degree-of-Freedom Nonlinear Dynamical Equation[J],Advances in Vibration Engineering,2008,7(3):217-226

推荐链接
down
wechat
bug