近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]阮诗伦.Strengthening, toughening, and self-healing for carbon fiber/epoxy composites based onPPESKelec...[J],JOURNAL OF APPLIED POLYMER SCIENCE,2021,138(12)
[2]阮诗伦.Strengthening, toughening, and self‐healing for carbon fiber/epoxy composites based on PPESK ele...[J],Journal of Applied Polymer Science,2021,138(12):50063-
[3]Chang, Baoning.Effects of temperature and fiber orientation on the tensile behavior of short carbon fiber rein...[J],POLYMER COMPOSITES,2021,42(2):597-607
[4]龚文正,常保宁,阮诗伦,申长雨.静电纺丝聚芳醚砜酮纤维膜穿刺强度研究[J],材料工程,2019,47(4):32-38
[5]Gong, Wenzheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu.A high-strength electrospun PPESK fibrous membrane for lithium-ion battery separator[J],POLYMER BULLETIN,2019,76(10):5451-5462
[6]龚文正,谷俊峰,阮诗伦,申长雨.静电纺丝制备高强度聚偏氟乙烯锂离子电池隔膜[J],高分子材料科学与工程,2019,35(3):148-155
[7]张黎,王新宇,李征,谷俊峰,阮诗伦,申长雨.熔融沉积3D打印材料粘接强度及模量预测研究[J],化工学报,2019,70(7):2727-2736
[8]Gong, Wenzheng,Wang, Xinyu,Li, Zheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu.A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion...[J],HIGH PERFORMANCE POLYMERS,2019,31(8):948-958
[9]杨志勋,徐潜岳,董玉山,阮诗伦,吴尚华,岳前进.基于实验的二维八边形液舱晃荡比尺效应研究[J],船舶力学,2019,23(5):505-511
[10]Li, Zheng,Wang, Xinyu,Ruan, Shilun,Li, Zhaojun,Shen, Changyu,Zeng, Yan.A modified hypervolume based expected improvement for multi-objective efficient global optimiza...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2018,58(5):1961-1979
[11]龚文正,周晶晶,阮诗伦,申长雨.静电纺丝与静电喷雾技术共纺制备PPESK/PVDF复合锂电池隔膜[J],材料工程,2018,46(3):1-6
[12]阮诗伦.A novel crystallization kinetics model of transcrystalline used for crystallization behavior simu...[J],Polymer Engineering and Science,2018
[13]阮诗伦.A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion b...[J],High Performance Polymers,2018
[14]Li, Zheng,Wang, Xinyu,Gu, Junfeng,Ruan, Shilun,Shen, Changyu,Lyu, Yan,Zhao, Yang.Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,94(1-4):1041-1059
[15]Wang, Xinyu,Li, Zheng,Li, Hongxia,Ruan, Shilun,Gu, Junfeng.Influence of nanoscale surface curvature of rutile on fibronectin adsorption by atomistic simul...[J],JOURNAL OF MATERIALS SCIENCE,2017,52(23):13512-13521
[16]龚文正,阮诗伦,申长雨.静电纺PPESK/PVDF同轴复合膜应用于锂电池隔膜的研究[A],2017,1
[17]肖博升,王新宇,李征,谷俊峰,阮诗伦,申长雨.基于修正Archard模型的聚醚醚酮磨损数值模拟[J],工程塑料应用,2017,45(9):88-92,104
[18]Gong W.,Song B.,Ruan S.,Shen C..A novel PPESK fibrous membrane separator based on electrospinning technique for lithium-ion batte...[A],75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017,2017,2017-May:132-137
[19]Wang, Xinyu,Li, Hongxia,Gu, Junfeng,Li, Zheng,Ruan, Shilun,Shen, Changyu,Wang, Minjie.Pressure Analysis of Dynamic Injection Molding and Process Parameter Optimization for Reducing ...[J],POLYMERS,2017,9(3)
[20]卫志军,阮诗伦,岳前进.液体晃荡自由液面波高的相似关系的实验研究[J],船舶力学,2017
[21]宋贝贝,龚文正,李宗蔚,阮诗伦,申长雨.静电纺无纺纤维膜与单根纤力学关系的研究[J],化工新型材料,2017,45(12):149-151
[22]李宗蔚,王新宇,任梦柯,宋贝贝,阮诗伦,李征.基于Fluent的三维注塑充填界面追踪方法研究[J],塑料工业,2016,44(12):28-32,45
[23]宋贝贝,龚文正,李宗蔚,阮诗伦,杨春秋,申长雨.工艺参数对静电纺PPESK微纳米纤维膜性能的影响[J],工程塑料应用,2016,44(11):44-47
[24]Li, Zheng,Ruan, Shilun,Gu, Junfeng,Wang, Xinyu,Shen, Changyu.Investigation on parallel algorithms in efficient global optimization based on multiple points ...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(4):747-773
[25]Wang, Xinyu,Li, Zheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu,Wang, Xicheng.Reducing service stress of the injection-molded polycarbonate window by optimizing mold constru...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,86(5-8):1691-1704
[26]王新宇,李征,谷俊峰,阮诗伦,申长雨,王希诚.工程用高聚物注塑成型制品服役应力优化设计[J],化工学报,2016,67(7):3040-3046
[27]陈世文,杨志勋,阮诗伦,周茂夫,岳前进.基于数值模拟的棱形液舱晃荡砰击载荷尺寸敏感性分析研究[J],海洋工程装备与技术,2016,3(1):39-45
[28]王新宇,阮诗伦,常保宁,林卜阳,方海东.聚醚醚酮材料改性、加工与应用[J],精密成形工程,2016,1:27-31,42
[29]阮诗伦,杨春秋,申长雨.工艺参数对静电纺PPESK 微纳米纤维膜性能的影响[J],工程塑料应用,2016,67(67):44-47
[30]王新宇,李征,谷俊峰,阮诗伦,申长雨.Reducing service stress of the injection molded polycarbonate window by optimizing mold construct...[J],The International Journal of Advanced Manufacturing Technology,2016,86(5):1691-1704
[31]赵小西,卫志军,阮诗伦,岳前进,陈晓东.液体晃荡荷载与液舱运动相位关系的数值研究[J],船舶力学,2015,19(8):919-926
[32]Zhao, Jian,Cheng, Gengdong,Ruan, Shilun,Li, Zheng.Multi-objective optimization design of injection molding process parameters based on the improv...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,78(9-12):1813-1826
[33]李征,谷俊峰,阮诗伦,王希诚.Integration optimization of molding and service for injection-molded product[J],The International Journal of Advanced Manufacturing Technology,2015,0(0):0-0
[34]李征,王希诚,谷俊峰,阮诗伦.Reducing service stress of the injection-molded polycarbonate window by optimizing mould construc...[J],The International Journal of Advanced Manufacturing Technology,2015,0(0):1-10
[35]李征,谷俊峰,阮诗伦.面向服役的高聚物注塑成型应力优化设计[A],2015
[36]朱小龙,阮诗伦,陈世文.三维薄膜型FLNG储舱晃荡载荷的数值仿真[J],计算机辅助工程,2014,23(5):44-48
[37]Wei Z.,Ruan S.,Chen X.,Luo S.,Yue Q..An experimental investigation of liquid sloshing impact load in a large-scaled prismatic tank[A],2014,272-277
[38]阮诗伦,孙本强,刘婵.碳纳米管/聚乙烯界面分子构型的数值仿真[J],计算机辅助工程,2014,23(2):110-114,116
[39]卫志军,阮诗伦,岳前进,谢彬.超大型储液舱内晃荡载荷实验研究[J],海洋工程装备与技术,2014,1(1):55-61
[40]刘婷婷,阮诗伦,尹江洲,岳前进,谢彬.浮式液化天然气液货围护系统的失效模式分析[J],海洋工程装备与技术,2014,1(1):50-54
京公网安备 11010802027423号