崔传勇 - 中国科学院金属研究所 - 沈阳先进材料研究发展中心

研究领域

（1）先进变形高温合金制备技术及组织性能；　（2）材料中的锯齿状塑性失稳及其机理研究；　（3）新型高温合金中的孪晶强化及其控制方法

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

C.Y.Cui, Y.F.Gu, Y.Yuan, and H.Harada, Dynamic strain ageing in a new Ni-Co base superalloy. Scripta.mater. 2011;64:502-505. C.Y.Cui, T.Jin, and X.F.Sun, Effects of heat treatments on the serrated flow in a Ni-Co-Cr base superalloy. J.Mater.Sci. 2011; 46:5546-5552. C.Y.Cui, G.M.Han, and X.F.Sun, Effect of Ce addition on the microstructures and mechanical properties of a Ni-Co-based superalloy. Adv.Mater.Res. 2012;415-417: 2062-2065. C.Y.Cui,Y.F.Gu,Y.Yuan,T.Osada and H.Harada, Enhanced mechanical properties in a new Ni-Co base superalloy by controlling microstructures. Mater.Sci. Eng.A. 2011; 528 (16-17): 5465-5469. L.Xu, C.Y.Cui, and X.F.Sun, Effects of Co and Ti additions on microstructures and compressive strength of Udimet710. Mater.Sci.Eng.A. 2011;528:7851~7856. C.Y.Cui, Y.F.Gu, D.H.Ping, and H.Harada, Microstructural evolution and mechanical properties of a Ni- based superalloy, TMW-4. Metall.Mater.Trans.A. 2009;40A(2):282-291. Y.Yuan, Y.F.Gu, C.Y.Cui, T.Osada, Z.H.Zhong, T.Tetsui, T.Yokokawa, and H. Harada, Influence of Co content on stacking fault energy in Ni-Co-base disc superalloys, J.Mater. Res.2011;26(22)2833- 2837. Y.Yuan, Y.F.Gu, C.Y.Cui, T.Osada, T.Yokokawa, and H.Harada, A novel strategy for the design of advanced engineering alloys-strengthening turbine disk superalloy via twinning structure. Adv. Eng. Mater. 2011;13(4):296-300. Y.Yuan, Y.F.Gu, C.Y.Cui, T.Osada, T.Tetsui, T.Yokokawa, and H.Harada, Creep mechanisms of U720Li disc superalloy at intermediate temperature. Mater.Sci.Eng.A. 2011; 528(15):5106-5111. Z.H.Zhong, Y.F.Gu, Y.Yuan, T.Osada, C.Y.Cui and T.Yokokawa, T.Tetsui and H.Harada, Fatigue crack growth characteristics of a new Ni-Co-base superalloy TMW -4M3: effects of temperature and load ratio, J. Mater.Sci. 2011;46( 23): 7573-7581.